Siemens HB90325GB, HB90324GB, U1721S2GB, HB90364GB, U1721S0GB Installation instructions
...
Installation instructions
2
3
For the installer and kitchen
expert!
Important installation notes:
❑ Properly dispose of packaging materi-
als.
❑ Do not use oven door handle for trans-
porting or handling the unit during installation.
❑ WARNING: Connection and first start of
the appliance may only be performed by
an authorised specialist.
❑ Connection must be made using an
H05VV-F mains connection cable.
❑ Nominal connected loading, nominal
voltage and model number of the
appliance:
see the rating plate, located behind the
oven door, fixed to the lower left facing
edge of the oven.
❑ The unit's nameplate is located at on
the right sidewall of the unit.
❑ Electrical safety of the appliance can be
ensured only if the equipment earth in
the building installation has been installed according to regulations.
❑ On the installation side a isolating device
shall be provided.
Any switch with a contact gap exceeding
3 mm may be considered a separating
device.
Other examples are LS switches, fuses
and contactors.
❑ In the case of repairs interrupt all power
connections to the unit.
❑ Connection diagram
Kitchen furniture
Oven housing units from virtually all lines of
kitchen furniture are suitable for installing
the built-in oven. However, the veneers or
plastic laminates on the housing unit must
be applied with heat-resistant glue (90 °C). If
plastic laminate or glue are not sufficiently
heat-resistant, warping, bubbling or detachment of the finish may result.
220-240V
~
L
N
Assembly Instructions
Loading...