Siemens Flowrite 599 Series, SKB62UA Series, SKB62UC Series, SKB62UD Series Technical Instructions

Flowrite™ 599 Series
Technical Instructions
Document No. 155-717
September 25, 2018
SKB/C
SKD
Siemens Industry, Inc.
Description
The Flowrite 599 Series SKB/C/D62UA Electronic Valve Actuator requires a 24 Vac supply and receives a 0 to 10 Vdc or a 4 to 20 mA control signal to proportionally control a valve. This actuator is designed to work with valves with a 3/4-inch (20 mm) or 1-1/2­inch (40 mm) stroke.
Features
Direct-coupled installation requires no special tools or adjustments
Visual and electronic stroke indication
Die-cast aluminum housing
Manual override
Spring return to fail-safe position
Automatic stroke calibration
Direct or reverse acting
Adjustable start and span
Stroke limit control
Choice of linear or equal-percentage flow characteristic
Maintenance-free
Application
These electronic actuators are designed to be used with Flowrite 599 Series valves with either 3/4-inch (20 mm) stroke (SKB/D) or a 1-1/2 inch (40 mm) stroke (SKC) in liquid and steam service applications; or other manufacturer's valves with appropriate Universal Valve Linkage Kits.
Technical Instructions Flowrite 599 Series SKB/C/D 62UA Electronic Valve Actuator Advanced Features Document Number 155-717 September 25, 2018
Page 2 Siemens Industry, Inc.
Product Numbers
Table 1. Product Numbers.
Actuator
Stroke
Order Number
3/4-inch (20 mm)
SKB62UA
SKD62UA
1-1/2 inch (40 mm)
SKC62UA
Warning/Caution Notations
WARNING:
Personal injury or loss of life may occur if you do not perform a procedure as specified.
CAUTION:
Equipment damage or loss of data may occur if you do not perform a procedure as specified.
Specifications
Power Supply
Operating voltage (SELV,PELV) 24 Vac ± 20% Frequency 50 or 60 Hz Power consumption SKB62UA 17 VA/12W
SKC62UA 28 VA/20W SKD62UA 17 VA/12W
Operating
Type of control (proportional) 0 to 10 Vdc; 4 to 20 mA; or 0 to 1000 ohms
Running time Opening: Closing: SKB62UA 120 seconds 15 seconds SKC62UA 120 seconds 20 seconds SKD62UA 30 seconds 15 seconds
Spring-return time Closing: SKB62UA 15 seconds SKC62UA 20 seconds SKD62UA 15 seconds
Nominal stroke SKB62UA 3/4-inch (20 mm) SKC62UA 1-1/2-inch (40 mm) SKD62UA 3/4-inch (20 mm)
Position force SKB/C 62UA 2800N SKD62UA 1000N
Flowrite 599 Series SKB/C/D 62UA Electronic Valve Actuator Advanced Features Technical Instructions Document Number 155-717 September 25, 2018
Siemens Industry, Inc. Page 3
Signal Inputs
Terminal Y Voltage 0 to 10 Vdc
Input impendence 100K ohm Current 4 to 20 mA Input impedance 240 ohm Signal resolution <1% Hysteresis <1%
Terminal Z Resistance 0 to 1000 ohm
Override control functions Z not connected No function (priority at Terminal Y) Z connected directly to G Maximum stroke 100% Z connected directly to G0 Minimum stroke 0% Z connected to M via 0 to 1000 ohm Linear or equal percentage
Signal Inputs, Continued
Terminal U Voltage 0 to 9.8 Vdc ± 2% Load impedance >500 ohm Current 4 to 19.6 mA ± 2% Load impedance <500 ohms
Ambient Conditions
Media temperature SKD 20°F to 300°F (-7°C to 150°C) SKB/C 20°F to 337°F (-7°C to 170°C)
Operation To IEC 721-3-3 Environmental conditions Class 3K5 Temperature
SKD 5°F to 122°F (-15°C to 50°C) SKB/C 5°F to 130°F (-15°C to 55°C)
Humidity 5% to 95% rh
Transport To IEC 721-2-1 Environmental conditions Class 3K5 Temperature 22°F to 149°F (-5°C to 65°C) Humidity <95% rh
Storage To IEC 721-3-1 Environmental conditions Class 1K3 Temperature
SKD 5°F to 122°F (-15°C to 50°C) SKB/C 5°F to 130°F (-15°C to 55°C)
Humidity 5% to 95% rh
Agency Certification
UL Listed to UL873 C-UL Certified to Canadian standard C22.2 No. 24-93
Meets CE requirements: EMC Directive 89/336/EEC
C-tick N474 Protection standard IP54 to EN 60 529
Protection Class III to EN 60 730
Technical Instructions Flowrite 599 Series SKB/C/D 62UA Electronic Valve Actuator Advanced Features Document Number 155-717 September 25, 2018
Page 4 Siemens Industry, Inc.
Miscellaneous
Materials Actuator housing and bracket Die-cast aluminum Housing box and manual adjustor Plastic
Conduit opening 1/2-inch NPSM Dimensions See Figure 23, Figure 24, Figure 25
and Figure 26. Weight
SKB62UA 18.9 lbs (8,60 kg) SKC62UA 22.5 lbs (10,00 kg) SKD62UA 8.5 lbs (3,85 kg)
Housing
NEMA Rating NEMA 1 (Interior only) See Accessories
Advanced Features
Direction of Operation Direct acting / reverse acting 0 to 10 Vdc; 10 to 0 Vdc 4 20 mA; 20 to 4 mA 0 to 1000 ohm/1000 to 0 ohm Stroke Limit Control Range of lower limit 0% to 45% adjustable Range of upper limit 100% to 55% adjustable
Sequence Control Starting Point of Sequence (Start) 0 to 15V adjustable Operating Range of Sequence (Span) 3 to 15V adjustable
Accessories
Figure 1. Auxiliary Switch.
ASC1.6 Auxiliary switch
Sends a signal to indicate that the valve is in the 0% stroke position.
The switching point is fixed at the 0% stroke position.
Switching capacity 24 Vac 4A resistive, 2A inductive
Lowest recommended current 10 mA
Figure 2. Stem Heating Element.
ASZ6.6 The stem heating element prevents
the formation of ice on the stem when the medium temperature drops below 32°F (0°C). It is suited for universal use with valves having a stem or spindle diameter of 10 or 14 mm.
Operating voltage 24 Vac/dc ± 20% Power consumption 40 VA/30W
Figure 3. SKB/C Weather Shield.
599-10065 The SKB/C actuator is UL listed to
meet NEMA Type 3R requirements (a degree of protection against rain, sleet, and damage from external ice formation) when installed with this weather shield and outdoor-rated conduit fittings in the vertical position. See Service Kits for replacement ultraviolet resistant cable ties.
Flowrite 599 Series SKB/C/D 62UA Electronic Valve Actuator Advanced Features Technical Instructions Document Number 155-717 September 25, 2018
Siemens Industry, Inc. Page 5
Accessories, Continued
Figure 4. SKD Weather Shield.
599-10071 The SKD actuator is UL listed to
meet NEMA TYPE 3R requirements (a degree of protection against rain, sleet, and damage from external ice formation) when installed with this weather shield and outdoor-rated conduit fittings in the vertical position. See Service Kits for replacement ultraviolet resistant cable ties.
Figure 5. Valve Retrofit Kit.
Universal Retrofit Kit
Kit contains the parts needed to adapt a valve to the following Siemens 599 Series Flowrite actuators: SKB, SKC, SKD, SQX. Selected valves from the following manufacturers can also be accommodated: Honeywell, Johnson Controls, and Siebe. See your local Siemens representative for details.
Service Kits
Circuit board replacement 4 668 5751 8 Manual override kit 4268 5510 8 Plastic wiring compartment cover 4 104 5582 8 Stem retainer kit
Contains one stem nut (Figure 7, Item 6) and one stem retainer clip. 2-1/2 and 3-inch valves 599-10048 4, 5, and 6-inch valves 599-10049
Retainer clamp kit 599-10200 Ultraviolet (UV) resistant cable ties (pkg. of 8) 538-994
WARNING:
This product contains a spring under high compression. Do not attempt to disassemble the actuator.
Valve Details
Figure 6. SKB/C Valve Parts.
1. Manual Adjuster
2. Pressure Cylinder
3. Piston
4. Reservoir
5. Pressure Chamber
6. Pump
7. Return Spring
8. Bypass Valve
9. Coupling
10. Valve Stem
11. Inner Valve
12. Position Indicator (0 to 1)
Loading...
+ 11 hidden pages