Siemens SITRANS P Series, DS III PROFIsafe Series Supplement To Operating Instructions
SITRANS
Pressure transmitter
SITRANS P, DS III PROFIsafe
series
Supplement to Operating Instructions
PROFIsafe
1
03/2006
A5E00732533-01
北京迪妙声科技有限公司
S
DELLSONIC
BEJING DELLSONICS SCIENCE & TECHNOLOGY L TD.
公 司 简 介
北京迪妙声科技有限公司（原名北京妙声力科技有限公司），位于北京市海淀区中关村
南大街，是与西门子公司德国总部正式签约的西门子过程仪表及分析仪器核心合作伙伴，
也是西门子北方区域规模最大、实力最强的优秀代理商。
公司主营：
一、西门子－妙声力(Milltronics)系列物位产品：超声波物位计、超声波液位差计、超声波泥水界
面计、超声波明渠流量计、雷达物位计、射频导纳物位计、射频导纳油水界面计、；射频导纳物位开关、
音叉式物位开关、阻旋式物位开关；皮带称、固体质量流量计、冲板流量计等。
二、西门子过程仪表产品：电磁流量计、质量流量计、超声波流量计、 温度变送器、压力变送器、
阀门定位器、气体分析仪等。
三、德国 UWT 公司的阻旋式料位开关、音叉式料位开关、重锤式料位计等产品。
四、自行研发生产超声波液位计、温度变送器、压力变送器、数显表及油田专用仪器等产品。
成立于 1954 年的西门子－妙声力公司(Milltronics)是世界公认的超声波物位测量领域
的领导者，全球最大的超声波物位仪表生产厂家，在超声波、雷达、电容技术领域拥有超过 60
项专利，超声波产品的综合性能指标经美国《控制》杂志评比，其综合性能名列全球第一！
作为西门子公司长期稳定的代理商，我公司有着 10 余年产品的销售和服务经验，无论
从专业技术水平、现货及备件库存量、售后服务质量、仪表维护以及故障产品国内维修能力
等方面，都具备显著的优势。尤其是我公司一流的技术支持和高效率高品质的服务体系，在
业界具有很高的知名度。
如果您需要相关的产品，需要咨询技术问题，需要值得信赖的合作伙伴，敬请来电垂询！
商务部总机电话：010-88579530/31/32/33，88579597，88571841，81968099（小灵通）
传真：总机转 50
谢谢您的合作与支持！
地址：北京海淀区魏公村街 1 号韦伯豪家园 3-3-702 (100081) http://www.dellsonics.com
电话：010-88579530/31/32/33，88579597，88571841 传真：总机转 50 E-mail:sales@dellsonics.com
Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
Danger
indicates that death or severe personal injury will result if proper precautions are not taken.
Warning
indicates that death or severe personal injury may result if proper precautions are not taken.
Caution
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
Caution
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
Notice
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes
in this documentation qualified persons are defined as persons who are authorized to commission, ground and
label devices, systems and circuits in accordance with established safety practices and standards.
Prescribed Usage
Note the following:
Warning
This device may only be used for the applications described in the catalog or the technical description and only in
connection with devices or components from other manufacturers which have been approved or recommended by
Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly
as well as careful operation and maintenance.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Automation and Drives
Postfach 48 48
90437 NÜRNBERG
GERMANY
Order No.: A5E00732533-01
Edition 03/2006
Copyright © Siemens AG 2006.
Technical data subject to change
Table of contents
1 PROFIsafe.............................................................................................................................................. 1-1
1.1 Introduction ................................................................................................................................ 1-1
1.2 Technical advantages of PROFIsafe ......................................................................................... 1-1
1.3 Further information..................................................................................................................... 1-2
1.4 Preconditions ............................................................................................................................. 1-2
1.5 PROFIsafe Configuration........................................................................................................... 1-3
1.5.1 Import EDD with SIMATIC PDM ................................................................................................ 1-3
1.5.2 Configure CPU with HW Config................................................................................................. 1-3
1.5.3 Configure device with HW Config .............................................................................................. 1-4
1.5.4 Configure CFC ........................................................................................................................... 1-4
1.6 Extended write protection .......................................................................................................... 1-6
1.6.1 Overview .................................................................................................................................... 1-6
1.6.2 Create user-defined PIN and lock the device ............................................................................ 1-7
1.7 PROFIsafe Commissioning........................................................................................................ 1-7
1.7.1 Activate and parameterize PROFIsafe with SIMATIC PDM ...................................................... 1-7
1.7.2 Commission PROFIsafe with SIMATIC PDM ............................................................................ 1-8
1.7.3 Check write protection with SIMATIC PDM ............................................................................. 1-10
1.8 Quit PROFIsafe commissioning............................................................................................... 1-11
1.8.1 Preparations for maintenance and service .............................................................................. 1-11
1.8.2 Deactivate PROFIsafe commissioning in SIMATIC PDM........................................................ 1-11
1.8.3 Deactivate PIN write protection in SIMATIC PDM................................................................... 1-12
Index................................................................................................................................................ Index-1
SITRANS P, DS III PROFIsafe series
Supplement to Operating Instructions, 03/2006, A5E00732533-01
iii
Table of contents
SITRANS P, DS III PROFIsafe series
iv Supplement to Operating Instructions, 03/2006, A5E00732533-01
PROFIsafe
1.1 Introduction
Overview
PROFIsafe enables safe communication by detecting and reporting all communication
errors. Data security is continuously monitored on the PROFIBUS in the process.
1.2 Technical advantages of PROFIsafe
The main advantage of PROFIsafe is that the PROFIBUS communication channel becomes
secured by a protocol in a transparent way. Thus incorrect values cannot be transferred to
the master without being discovered. The user does not need any special network
components. All the user needs is the standard network components of PROFIBUS.
However, the CPU must be suitable for safety applications.
In the following example, you see that PROFIsafe and PROFIBUS devices can be operated
simultaneously on a PROFIBUS network.
1
)FRQWUROZLWK
)PDVWHU
)VHQVRU )ILHOGGHYLFHV
Figure 1-1 Example of PROFIsafe communication
SITRANS P, DS III PROFIsafe series
Supplement to Operating Instructions, 03/2006, A5E00732533-01
6WDQGDUG,2 6WDQGDUG
352),%86'3
'33$
),2
FRQWUROOHU
352),%863$
6WDQGDUG,2
1-1
Loading...