Siemens SIMATIC TS Adapter IE User Manual
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
TS Adapter IE
SIMATIC
Industrial Software Engineering
Tools
TS Adapter IE
Manual
_________________
Introduction
Properties of the TS Adapter
_________________
IE
_________________
Requirements for Operation
_________________
Mounting
_________________
Connecting
_________________
Commissioning
Working with the
_________________
TS Adapter IE
_________________
Error diagnostics
_________________
Specifications
1
2
3
4
5
6
7
8
9
11/2010
A5E00977705-03
Legal information
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation for the specific task, in particular its warning notices and
safety instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be adhered to. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E00977705-03
Ⓟ 12/2010
Copyright © Siemens AG 2010.
Technical data subject to change
Table of contents
1 Introduction................................................................................................................................................ 7
1.1
2 Propertie
2.1
2.2
2.3
2.4 Features
2.5
3
Requi
3.1
3.2
4
Mounting
4.1
4.2 Mounting on Profile Rail
4.3
4.4
5
Conne
5.1 Connec
Preface
s of the TS Adapter IE ................................................................................................................. 9
Variant
Func
Connec
Product Package and Spare Parts
rements for Operation..................................................................................................................... 13
Software
Hardware Requirement
.................................................................................................................................................. 15
Mounting
Mounting on DIN Rails
Cubic
cting .............................................................................................................................................. 21
...........................................................................................................................................7
s of the TS Adapter IE ........................................................................................................9
tions........................................................................................................................................9
tion Types ........................................................................................................................11
.......................................................................................................................................12
le Mounting .........................................................................................................................19
tions .................................................................................................................................21
..............................................................................................12
Requirements ...............................................................................................................13
s ..............................................................................................................14
......................................................................................................................................15
s.............................................................................................................16
.................................................................................................................17
5.2
5.3
5.4
5.5 RS232 Port................................................................................................................
5.6
5.6.1
5.6.2 ISDN Variant of the TS Adapter IE
6 Commis
6.1
TS Adapter IE
Manual, 11/2010, A5E00977705-03
LEDs on the TS Adapter IE
Power Suppl
Etherne
Interfaces
Modem Varian
sioning ........................................................................................................................................ 37
erview ......................................................................................................................................37
Ov
y...............................................................................................................................27
t Port................................................................................................................................29
to the phone network...................................................................................................33
t of the TS Adapter IE...........................................................................................33
..........................................................................................................25
..............................................................................................35
...................32
3
Table of contents
7 Working with the TS Adapter IE............................................................................................................... 39
7.1 Safety Instructions....................................................................................................................... 39
7.2
7.3
Software Ins
Firmware Update
tallation.................................................................................................................... 39
......................................................................................................................... 40
7.4 Setting the PG/PC Interface
7.5
7.6
7.6.1
Connecting t
Setting IP Pa
Setting IP Pa
7.6.2 Setting IP Pa
7.7 Establishing
7.7.1
Establishing
7.7.2 Establishing
7.8 TS Adapter IE Configurati
7.9
7.9.1
Openi
Openi
7.9.2 Openi
7.9.3 Openi
7.9.4 Openi
7.10 S
7.11 S
7.12
7.13
etting Remote Maintenance Parameters.................................................................................. 58
etting the E-mail Parameters .................................................................................................... 59
ending an E-mail from a SIMATIC CPU ................................................................................... 60
S
etting Parameters for Use as Default Router............................................................................ 60
S
he TS Adapter IE .................................................................................................... 42
rameters of TS Adapter IE for the First Time......................................................... 44
rameters by Direct Connection with TeleService................................................... 44
rameters by Direct Connection with the SIMATIC Manager.................................. 46
a Remote Connection to the TS Adapter IE........................................................... 47
a Remote Connection to the TS Adapter IE via TeleService ................................. 49
a Remote Connection to the TS Adapter IE via a Dial-up Connection................... 50
on - Overview..................................................................................... 52
ng the Configuration Interface........................................................................................... 54
ng the Configuration Interface by Direct Connection with TeleService............................. 54
ng the Configuration Interface by Direct Connection in a Browser ................................... 55
ng the Configuration Interface via a Remote Connection with TeleService...................... 56
ng the Configuration Interface in a Browser via a Remote Connection ............................ 57
........................................................................................................ 41
8
7.14
7.15
7.16
rror diagnostics...................................................................................................................................... 65
E
8.1
indows Settings for Use as Default Router.............................................................................. 61
W
Resetting the Configuration with the Configuration Interface ..................................................... 62
esetting the Configuration with P RES button .......................................................................... 63
R
Error Diagnos
tics Based on LEDs .............................................................................................. 65
8.2 Logon to the configuration interface fails
8.3
8.4
8.4.1
Logon to the configuration interface is denied
Malfunctions i
The partner is
n remote maintenance .......................................................................................... 69
not answering....................................................................................................... 69
8.4.2 Logon to the TS Adapter IE fails
8.4.3 The c
8.4.4 Ac
8.5 Malfunc
8.5.1
8.5.2 The modem connection i
8.5.3 The c
8.6 Not pos
8.7
allback fails......................................................................................................................... 71
cess to the automation component fails ................................................................................. 72
tions when establishing an outgoing call........................................................................ 73
connection establishment ................................................................................................ 73
Check
s not made........................................................................................... 73
onnection establishment fails............................................................................................. 74
sible to send e-mail......................................................................................................... 75
Internet access
via the TS Adapter IE is not possible ................................................................ 76
.................................................................................... 67
............................................................................ 68
................................................................................................. 70
TS Adapter IE
4 Manual, 11/2010, A5E00977705-03
Table of contents
8.8 Error diagnostics - Ethernet .........................................................................................................77
8.8.1 You do not know the IP address of the TS Adapter IE................................................................77
8.8.2 The TS Adapter IE is
not accessible via Ethernet .......................................................................77
9 S
pecifications .......................................................................................................................................... 79
9.1 General Specific
9.2
9.3
9.4
9.5
9.6
9.7
Specifications of the analog modem
Spec
Electrom
Transportation and Storage Conditions
Mech
Specification
Voltage.........................................................................................................................................89
9.8 Standards, Appro
9.9
9.10
ndex........................................................................................................................................................ 99
I
Cus
echnical Support ........................................................................................................................96
T
ations .................................................................................................................79
............................................................................................81
ifications of the ISDN Terminal Adapter ..............................................................................83
agnetic Compatibility......................................................................................................84
.......................................................................................86
anical and Climatic Ambient Conditions for Operation of the TS Adapter IE......................87
of Insulation Testing, Protection Class and Degree of Protection / Test
vals, Certificates, Guidelines, Labels and Declarations ..................................90
tomer Information for ACTA...................................................................................................95
TS Adapter IE
Manual, 11/2010, A5E00977705-03
5
Table of contents
TS Adapter IE
6 Manual, 11/2010, A5E00977705-03
Introduction
1.1 Preface
Purpose of this manual
This manual provides a comprehensive overview of the TS Adapter IE. It offers support for
the installation and commissioning of the software and hardware. It explains the
requirements for operation and the hardware installation, and how to connect the adapter to
Ethernet.
The intended readership of the manual includes programmers and engineering personnel
involved in configuration, commissioning and servicing of automation systems.
Basic knowledge required
General knowledge of automation systems engineering is prerequisite for understanding the
topics dealt with in this manual.
Users should also be familiar with the operation of computers or auxiliary programming
equipment similar to PCs, operating under the Windows 2000 or XP operating systems via
Ethernet communication and modems.
1
Supplementary documentation
You can find information on PROFINET and Ethernet in the following documentation:
Documentation Contents
PROFINET system description
System manual
SIMATIC NET: Twisted-pair and
fiber-optic networks
Manual
Communication with SIMATIC
Manual
Basic knowledge of PROFINET: Network component, data
exchange and communications, PROFINET IO, Component
Based Automation, application example - PROFINET IO and
Component Based Automation
Description of Industrial Ethernet networks, network
configuration, components, installation regulations for
networked automation systems in buildings, etc.
Basics, services, networks, communication functions,
connecting PGs/OPs, project design and configuration in
STEP 7
TS Adapter IE
Manual, 11/2010, A5E00977705-03
7
Introduction
1.1 Preface
Range of validity of this manual
This manual applies to the following variants of the TS Adapter IE:
As of version Variant Order number
Firmware Hardware
TS Adapter IE Modem 6ES7 972-0EM00-0XA0 V 1.0.1 2
TS Adapter IE ISDN 6ES7 972-0ED00-0XA0 V 1.0.1 1
This manual details the device applicable at date of publication.
Network approval for Europe
The TS Adapter II Modem is compliant with the European Standard TBR 21.
The TS Adapter IE ISDN is compliant with the telecommunications registration TBR 3.
Network approval for the USA
The TS Adapter IE Modem complies with ACTA.
Network approval for Canada
The Industry Canada (ic) Label identifies certified TS Adapter IE Modem.
Recycling and disposal
The TS Adapter IE features low-pollution components which make it suitable for recycling. In
order to ensure environmentally friendly recycling and disposal of your used device, engage
a certified electronic scrap disposal specialist.
TS Adapter IE
8 Manual, 11/2010, A5E00977705-03
Properties of the TS Adapter IE
2.1 Variants of the TS Adapter IE
Variants of the TS Adapter IE
There are two variants of the TS Adapter IE:
● TS Adapter IE Modem
– with an internal modem
– with a connection for an external modem or ISDN-TA
● TS Adapter IE ISDN
– with internal ISDN-TA
– with a connection for an external modem or ISDN-TA
2.2 Functions
2
Functions of the TS Adapter IE
The TS Adapter IE has the following functions:
● Remote maintenance over the phone network
Wit the TS Adapter IE, you can use an application running on the PG/PC, such as
STEP 7, to access Industrial Ethernet connected S7 and C7 automation components
over the phone network.
For this the TS Adapter IE requires
– a connection to the automation components via Industrial Ethernet,
– a modem connection to the PG/PC
● Sending e-mail
With the AS_MAIL function block you can send e-mail from a SIMATIC CPU via the
TS Adapter IE. To do this, the TS Adapter IE establishes an outgoing modem connection
to a dial-up server, such as at an Internet Service Provider (ISP), and sends the e-mail
via a mail server accessible there.
● Standard routing
With the TS Adapter IE you can set up a modem connection to an ISP to access data on
the Internet using a browser.
TS Adapter IE
Manual, 11/2010, A5E00977705-03
9
Loading...