Siemens IMPACT Pro R Instructions And Guidance

IMPACT Pro R

Instructions and guidance

Your IMPACT Pro R
hearing instrument

Click MouldClick Dome

Your hearing instruments have one of
the following ear pieces:

Features

1 Receiver Unit
2 Click Dome
3 Battery compartment
4 Push Button
5 Microphone Cover
6 Click Mould
7 Grid
8 HF-4 Wax Guard

1. Open the battery

compartment

Changing the batteries

3. Close battery door

2. Remove coloured

sticker from new
battery, place battery
in drawer with + symbol on battery
+ side up. (You should only remove
the protective sticker if you actually
use the battery)

Your hearing instrument may be
programmed to inform you when the
battery should be replaced for best
system performance. You may hear an
intermittent series of beeps and/or
experience low amplification power or
volume. Change the battery when
either of these occur.

Low Battery indicator

NOTICE

Do not use lubricant when you
insert the Click Dome/Mould,
because it may clog the sound
outlet
For hearing instruments with a
Click Mould, handle by holding the
Click Mould. Do not pull the tube

Inserting and removing
your hearing instrument

Inserting your hearing instrument

Turn your hearing instrument off
Hold the receiver with the Click
Dome/Mould between your thumb
and index finger and insert it
carefully into the ear canal. You may
find it helpful to pull your ear
slightly upward or to the back
Place your hearing instrument
behind your ear
Turn your hearing instrument on

Removing your hearing instrument

Turn your hearing instrument off
Hold the Receiver Unit/Click Mould
between your thumb and index
finger and carefully pull it out. You
may find it helpful to lightly push
your ear from the back

CAUTION

Attach the Click Dome properly.
If the Click Dome remains in the
ear, have it removed by your NHS
Audiologist.

Switching the
instrument on/off

Off:

Press open the battery
compartment to the
first stop to switch off.

On:

Close the battery
compartment fully
to switch on.