•168 pin, dual read-out, Single in-Line Mem ory Module
•Utilizes eighteen 16M × 4 -DRAM s and four BiCMOS 8-bit buffers/line drivers VT244A
•Two versions : H YM 72V1600GS with TSOPII-components (4 mm thickness )
HYM 72V1610GS with SOJ-components (9 mm thickness)
•8192 refresh cycles / 128 ms with 13 / 11 addressing
•Gold contact pad
•double sided module with 38.1 mm (1500 mil ) height
Semiconductor Group1
111.95
HYM72V1600/10GS-50/-60
16M x 72-ECC Module
The HYM 72V1600/10GS-50/-60 is a 128 MByte DRAM module organized as 16 777 216 words by
72-bit in a 168-pin, dual read-out, single-in-line package compr ising eighteen HYB 3164400BT/BJ
16M × 4 DRAMs in 500 mil wide TSOPII or SOJ- packages mounted together with eighteen 0.2 µF
ceramic decoupling capacitors on a PC board. All inputs except RAS
four BiCMOS 8-bit buffers/line drivers.
Each HYB 3164400BT/BJ is described in the data sheet and is fully electrically tested and
processed according to Siemens standard quality procedure prior to module assembly. After
assembly onto the board, a further set of electrical tests is performed.
The density and speed of the module can be detected by the use of presence detect pins.
HYM 72V1600GS-60Q67100-Q2079L-DIM-168-73.3V 60ns DRAM module
HYM 72V1610GS-50L-DIM-168-73.3V 50ns DRAM module
HYM 72V1610GS-60Q67100-Q2080L-DIM-168-73.3V 60ns DRAM module
Note: 1 = High Leve l ( Dr ive r Outp ut ) , 0 = Low Level (Dri ver Output ) for PDE ac tive ( g round) . For PDE at a high
level all PD ter m in al ar e in tri-state .
Semiconductor Group2
HYM72V1600/10GS-50/-60
16M x 72-ECC Module
The HYM 72V1600/10GS-50/-60 is a 128 MByte DRAM module organized as 16 777 216 words by
72-bit in a 168-pin, dual read-out, single-in-line package compr ising eighteen HYB 3164400BT/BJ
16M × 4 DRAMs in 500 mil wide TSOPII or SOJ- packages mounted together with eighteen 0.2 µF
ceramic decoupling capacitors on a PC board. All inputs except RAS
four BiCMOS 8-bit buffers/line drivers.
Each HYB 3164400BT/BJ is described in the data sheet and is fully electrically tested and
processed according to Siemens standard quality procedure prior to module assembly. After
assembly onto the board, a further set of electrical tests is performed.
The density and speed of the module can be detected by the use of presence detect pins.
HYM 72V1600GS-60Q67100-Q2079L-DIM-168-73.3V 60ns DRAM module
HYM 72V1610GS-50L-DIM-168-73.3V 50ns DRAM module
HYM 72V1610GS-60Q67100-Q2080L-DIM-168-73.3V 60ns DRAM module