Siemens HA 8000 (22) P/T SD, HA 8000 P/T SD, HA 8022 P/T SD Illustration Manual

HA 8000 (22) P/T SD Illustration

Controls

1Name keys
2 labeling card
3 Program key (SET)
4R key
5 Last number redial key (REDIAL)
6 Micophone off key (MUTE)
7 Volume key (HIGH)
8 Volume key (LOW)
9 Handfree and all person listen key
10 Keypad
11 Handfree Micophone
12 In-Use LED indicator
13 Handfree LED indicator

Catalogue

Startup

Important Information ………………………………………………… 2
Contents of the package ………………………………………………. 3
Hooking up the equipment ……………………………………………. 4
Note on installing your equipment ……………………………………. 5

Basic settings

Checking the signaling method set ……………………………………. 6
Setting the signaling method ………………………………………….. 6
Adjusting the ringer volume ………………………………………….. 7
Setting the handset volume …………………………………………… 7
Adjusting the ringer tone sequence …………………………………… 8
Setting the tone ringing melody ………………………………………. 8

Dialing with the euroset 812

Dialing with the keypad ………………………………………………. 9
On-hook dialing ………………………………………………………. 9
Last number redial ……………………………………………………. 10
Saved number redial (notepad) ……………………………………….. 10
Retrieving a saved number (notepad) ………………………………… 11
Dialing with the name keys …………………………………………… 11
Muting the microphone ……………………………………………….. 11
Storing name keys …………………………………………………….. 12
Storing number in the name key while making phone calls…………… 12

Making phone calls with and without the handset

Activating handsfree mode ……………………………………………. 13
Adjusting the loudspeaker volume ……………………………………. 13
Deactivating handsfree mode …………………………………………. 14
Allowing others to listen in on a call ………………………………….. 14

Catalogue

Remote control, data transfer

Temporary swithover of the signaling method……………… 15

Important information for users

Taking care of your telephone……………………………….. 16
If your telephone malfunctions………………………………. 16
Technical data………………………………………………... 16

Quick reference guide………………………………………... 17
Labels………………………………………………………… Back cover

2

Startup

Important information

Signaling method

Before using your telephone, you should check the signaling method and set the
correct method if necessary. HA 8000(22) P/T SD is set to dual-tone multi-frequency
signaling in home.

Signaling method setting

Pulse=Pulse dialing
DTMF=Dual-tone multi-frequency dialing

3

Startup

Contents of the package

1. euroset 812 4. Telephone connecting cable

2 .Handset 5.Operating instructions

3. Handset connecting cable 6. Telephone guarantee

4

Startup

Hooking up the equipment

Once a few simple connections have been made,
your telephone is ready for operation:

1. Coiled handset connectin g cable

• Long straight end of the handset connecting cable: Insert the connector into the
smaller socket on the bottom of the unit until it clicks into place. Place the
cable in the side cable guide.

• Connect the coiled end to the handset.

2. Connecting cable

• Insert the connector into the larg er socket on the bottom of the unit u ntil
it clicks into place.Place the cable in the cable guid e.

• Attach the connector to your telephone jack.

Your euroset 812 is now ready for operation.