Page 1
en Instruction for Use
FI24DP31AU
Freezer
Page 2
2
en Table of Contents
enInstruction for Use
Safety and warning information ......................... 3
Information concerning disposal ....................... 4
Installing the appliance ....................................... 4
Ambient temperature and ventilation ............... 4
Scope of delivery .................................................. 5
Connecting the appliance ................................... 5
Getting to know your appliance ........................ 6
Switching the appliance on ................................ 8
Set the language .................................................. 8
Setting the temperature unit ............................... 8
Setting the temperature ...................................... 8
Special functions .................................................. 9
Alarm function .................................................... 10
Usable capacity ................................................. 10
Freezer compartment ....................................... 10
Freezing fresh food ........................................... 11
Super freezing .................................................... 11
Thawing frozen food ......................................... 11
Ice maker ............................................................ 12
Ice and water dispenser .................................. 12
Water filter ........................................................... 13
Specification and performance data sheet .. 14
Interior fittings .................................................... 15
Switching off and disconnecting
the appliance ..................................................... 16
Defrosting ........................................................... 16
Cleaning the appliance .................................... 16
Light (LED) .......................................................... 17
Tips for saving energy ...................................... 17
Operating noises ............................................... 17
Eliminating minor faults yourself .................... 18
Customer service .............................................. 20
Page 3
en
3
Safety and warning information
Before you switch ON the appliance
Please read the operating and installation instructions
carefully! They contain important information on how to
install, use and maintain the appliance.
The manufacturer is not liable if you fail to comply with
the instructions and warnings. Retain all documents for
subsequent use or for the next owner.
Technical safety
This appliance contains a small quantity of
environmentally-friendly but flammable R600a
refrigerant. Ensure that the tubing of the refrigerant
circuit is not damaged during transportation
and installation. Leaking refrigerant may cause eye
injuries or ignite.
If damage has occurred
■ Keep naked flames and/or ignition sources away
from the appliance,
■ thoroughly ventilate the room for several minutes,
■ switch off the appliance and pull out the mains plug,
■ inform customer service.
The more refrigerant an appliance contains, the larger
the room must be in which the appliance is situated.
Leaking refrigerant can form a flammable gas-air
mixture in rooms which are too small.
The room must be at least 1 m³ per 8 g of refrigerant.
The amount of refrigerant in your appliance is indicated
on the rating plate inside the appliance.
If the power cord of this appliance is damaged, it must
be replaced by the manufacturer, customer service or a
similarly qualified person. Improper installations
and repairs may put the user at considerable risk.
Repairs may be performed by the manufacturer,
customer service or a similarly qualified person only.
Only original parts supplied by the manufacturer may
be used. The manufacturer guarantees that only these
parts satisfy the safety requirements.
A extension cable may be purchased from customer
service only.
Important information when using
the appliance
■ Never use electrical appliances inside the appliance
(e.g. heater, electric ice maker, etc.).
Risk of explosion!
■ Never use a steam cleaner to defrost or clean
the appliance! The steam may penetrate electrical
parts and cause a short-circuit. Risk of electric
shock!
■ Do not use pointed or sharp-edged implements
to remove frost or layers of ice. You could damage
the refrigerant tubing. Leaking refrigerant may ignite
or cause eye injuries.
■ Do not store products which contain flammable
propellants (e.g. spray cans) or explosive
substances in the appliance. Risk of explosion!
■ Do not stand or support yourself on the base,
drawers or doors, etc.
■ Before defrosting and cleaning the appliance,
pull out the mains plug or switch off the fuse.
Do not pull out the mains plug by tugging the cable.
■ Bottles which contain a high percentage of alcohol
must be sealed and stored in an upright position.
■ Keep plastic parts and the door seal free of oil
and grease. Otherwise, parts and door seal will
become porous.
■ Never cover or block the ventilation openings
for the appliance.
■ People (childern incl.) who have limited physical,
sensory or mental abilities or inadequate knowledge
must not use this appliance unless they
are supervised or given meticulous instructions.
■ Do not store bottled or canned drinks (especially
carbonated drinks) in the freezer compartment.
Bottles and cans may explode!
■ Never put frozen food straight from the freezer
compartment into your mouth.
Risk of low-temperature burns!
■ Avoid prolonged touching of frozen food, ice
or the evaporator pipes, etc.
Risk of low-temperature burns!
Children in the household
■ Keep children away from packaging and its parts.
Danger of suffocation from folding cartons and
plastic film!
■ Do not allow children to play with the appliance!
■ If the appliance features a lock:
keep the key out of the reach of children!
General regulations
The appliance is suitable
■ for freezing food,
■ for making ice,
■ for dispensing drinking water.
This appliance is intended for use in the home
and the home environment.
The appliance is suppressed according to EU Directive
2004/108/EC.
The refrigeration circuit has been checked for leaks.
This product complies with the relevant safety
regulations for electrical appliances (EN 60335-2-24).
Page 4
en
4
Information concerning
disposal
* Disposal of packaging
The packaging protects your appliance from damage
during transit. All utilised materials are environmentally
safe and recyclable. Please help us by disposing of the
packaging in an environmentally friendly manner.
Please ask your dealer or inquire at your local authority
about current means of disposal.
* Disposal of your old appliance
Old appliances are not worthless rubbish! Valuable raw
materials can be reclaimed by recycling old appliances.
ã=Warning
Redundant appliances
1. Pull out the mains plug.
2. Cut off the power cord and discard with the mains
plug.
3. Do not take out the trays and receptacles: children
are therefore prevented from climbing in!
4. Do not allow children to play with the appliance once
it has spent its useful life. Danger of suffocation!
Refrigerators contain refrigerant and gases
in the insulation. Refrigerant and gases must be
disposed of professionally. Ensure that tubing
of the refrigerant circuit is not damaged prior to proper
disposal.
Installing the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
Transpo rting
The appliances are heavy and must be secured during
transportation and installation.
Because of the weight / dimensions of the appliance
and to minimise the risk of injuries and damage to
the appliance at least two persons are necessary to
set-up the appliance securely.
Installation location
A dry, well ventilated room is suitable as an installation
location. The installation location should not be
exposed to direct sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use a suitable
insulating plate or observe the following minimum
distances from the heat source:
■ 3 cm to electric or gas cookers.
■ 30 cm to an oil or coal-fired cooker.
The floor of the installation location must not give way;
if required, reinforce floor. To ensure that the ice maker
functions correctly, the appliance must be upright.
Ambient temperature
and ventilation
Ambient temperature
The climate class can be found on the rating plate.
The climate class indicates within which ambient
temperatures the appliance can be operated.
Note
The appliance is fully functional within the room
temperature limits of the indicated climatic class. If
an appliance of climatic class SN is operated at colder
room temperatures, the appliance will not be damaged
up to a temperature of +5 °C.
Ventilation
Conduction of the heated air must not be obstructed.
Otherwise, the refrigeration unit must work harder. This
increases power consumption. Therefore: Never cover
or block the ventilation opening!
This appliance is identified
according to the European
guideline 2002/96/EC on waste
electrical and electronic
equipment – WEEE. The directive
specifies the framework for an
EU-wide valid return and re-use
of old appliances.
Climate class Permitted ambient temperature
SN +10 °C to 32 °C
N +16 °C to 32 °C
ST +16 °C to 38 °C
T +16 °C to 43 °C
Page 5
en
5
Scope of delivery
After unpacking all parts, check for any damage in
transit.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our
customer service.
The delivery consists of the following parts:
■ Built-in appliance
■ Interior fittings (depending on model)
■ Operating instructions
■ Installation manual
■ Customer service booklet
■ Warranty enclosure
■ Information on the energy consumption and noises
■ Bag containing installation materials
Connecting the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
Do not remove the transportation protection devices
from the shelves and storage compartments until
the appliance has been installed.
Always connect the water before the power.
Apart from statutory national regulations, you should
stick to the connection terms relating to the local
electricity and water companies.
After installing the appliance, wait at least 1 hour until
the appliance starts up. During transportation the oil
in the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for the first time,
clean the interior of the appliance (see chapter
“Cleaning the appliance”).
Water connection
ã=Caution
Connect the appliance to a drinking water line.
The water may be connected only by a competent fitter
according to the local regulations of the appropriate
water supply company.
A cold water connection is necessary for operating
the automatic ice maker. The water pressure must be
between 0.17 MPa and 10 MPa (1.7 and 10 bar). The
installation must correspond to the local plumbing
regulations.
A separate shut-off valve should be installed in
the cold-water inflow.
The shut-off valve should not be located behind
the appliance. It is recommended that you mount
the shut-off valve directly next to the appliance or at
another place which is easily accessible.
When installing the water connection, pay attention to
the permissible installation area for the water mains.
For connection to the drinking water mains use only
water pipes which are suitable for drinking water.
Observe national regulations and the connection
conditions of the local water supply companies.
The maximum outside diameter of the water mains
(without connecting pieces) is 10 mm.
Electrical connection
The socket must be near the appliance and also freely
accessible following installation of the appliance.
The appliance complies with the protection class I.
Connect the appliance to 220-240 V/50 Hz alternating
current via a correctly installed socket with protective
conductor. The socket must be fused with a 10 to 16 A
fuse.
For appliances operated in non-European countries,
the identification plate should be checked whether
the electric supply and the current model stated match
the values of the mains supply. The rating plate is
situated in the bottom left-hand side of the appliance.
ã=Warning
Never connect the appliance to electronic energy saver
plugs.
Our appliances can be used with mains and sinecontrolled inverters. Mains-controlled inverters are used
for photovoltaic systems which are connected directly
to the national grid. Sine-controlled inverters must be
used for isolated applications (e.g. on ships or in
mountain lodges) which are not connected directly to
the national grid.
Page 6
en
6
Getting to know your appliance
These operating instructions refer to several models.
The diagrams may differ.
1 Light switch
2 Controls
3Ice maker
4 Ice cube container
5 Shelf in the freezer compartment
6Container
7 Ventilation
8Water filter
9 Door shelf
10 Ice and water dispenser
11 Controls for the ice and water dispenser
12 Water collecting tray
Page 7
en
7
Controls
Note
A sound can be heard every time a button is actuated if
this function is activated in the sound menu during
the setup mode.
Symbols in the display field
A On/Off button
Serves to switch the whole appliance on and off.
B Ice maker button
Serves to switch the ice maker on and off,
see chapter Ice maker.
C Alarm button
Used to switch off the warning signal, (see
chapter “Alarm function”).
D “Super” button (freezer compartment)
Switches super freezing on and off.
E Display panel
The temperatures in the refrigerator
compartment and in the freezer compartment
are shown in the display panel. Activated
special functions are shown via “symbol”.
The menus and setting options which are
available are represented on the display panel
in the setup mode, see chapter “Special
functions”.
F Selection buttons
The temperature setting is activated using
the selection buttons (see chapter Setting
the temperature).
For selecting a menu in the setup mode (see
chapter Special functions).
G Setting buttons
The temperature can be changed using
the setting buttons (see chapter “Setting
the temperature”).
More settings can be selected in the setup
mode, (see chapter “Special functions”).
H “setup” button
This button starts and ends the setup mode. If
the setup mode is ended using the setup button,
the changes which have been made are stored.
I Button Vacation
Is used to s witc h vacat ion m ode o n an d off, ( see
chapter Special functions, section Vacation
mode).
Super cooling or super freezing is active,
see chapter Super cooling and Super
freezing.
Holiday mode is activated, see chapter
Special functions.
For the setting options in the set up mode,
see chapter Special functions.
A warning message is displayed, see
chapter Alarm function.
Ice maker is switched on, see chapter Ice
maker.
Signal to the water filter is displayed, see
chapter Water filter.
Page 8
en
8
Controls for the ice and water dispenser
Switching the appliance on
Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on
when the door is open.
Operating tips
■ When the appliance has been switched on, it may
take several hours until the set temperature has
been reached.
■ The fully automatic No Frost system ensures that
the freezer compartment remains free of ice.
Defrosting is not required.
Set the language
The display languages can be changed according to
the table in the chapter Setup mode.
In order to change the display language:
1. Press setup button.
2. Press the ¾ or ¿ setting button, until the set
language is displayed.
3. Press the @ or A setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1. Press setup button.
The first menu (temperature unit) is displayed.
2. Press the @ or A setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Setting the temperature
Freezer compartment
(can be selected from -14 °C to -24 °C)
We recommend a setting of -18 °C.
1. Activate the setup mode with the selection button ¾.
2. Set the desired temperature with the @ (warmer)
or A (cooler) setting buttons.
Request water button.
Ice cube request button.
Crushed ice request button.
Switch on the agitation function.
Lock button for the ice and water maker
control panel (childproof lock).
To lock and unlock, hold down the button
for 3 seconds.
Switch permanent light function on and off.
Page 9
en
9
Special functions
The following special functions can be selected
or displayed:
Setup mode
In Setup mode you can make your personal settings.
Switching on
Press setup button.
The first menu (temperature unit) is displayed in
the fascia.
Making settings
1. Switch on setup mode.
2. Press the selection button ¾ or ¿.
The next menu is displayed and its current setting
(mostly ON or OFF).
3. Press the setting button @ or A.
The setting is saved, if the next menu is selected
using ¾ or ¿.
Switching off
Press setup button.
All of the changed settings are stored.
Note
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again in
the fascia.
Menus in the setup mode
The following settings can be made.
Vacation mode
If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
vacation mode.
When Vacation mode is switched on, the following
settings are made:
■ The appliance works in energy saving mode.
■ The illumination is switched off.
■ The “super freezing” function is ended (if activated).
Switching on
Press Vacation button.
VACATION is displayed in the display panel.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Menu Possible setting
Temperature unit °C (degrees Celsius)
°F (degrees Fahrenheit)
Language Deutsch
English
French
Danish
Finnish
Greek
Dutch
Italian
Polish
Portuguese
Norwegian
Russian
Swedish
Spanish
Turkish
Czech
Sound On
Off
Energy saving mode
(eco function)
On
Off
Page 10
en
10
Sabbath mode
When Sabbath mode is switched on, the following
settings are switched off:
■ Super freezing (if it is switched on)
■ Ice maker
■ Acoustic signal
■ Interior light
■ Messages in the display panel
■ The background illumination of the display panel is
reduced.
■ Buttons are locked.
Switching on
1. Press and hold down the “super” button.
2. Press Vacation button.
3. Press “super” button and hold down for 3 seconds
longer.
The symbol VACAT IO N flashes on the display panel
and SABBATH is displayed.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Energy saving mode
If the energy saving function (eco function) is activated,
the appliance switches to energy saving operation. This
energy saving function is preset at the factory in order
to reduce energy consumption. The background
illumination of the fascia is likewise reduced.
Switching on
1. Press setup button.
2. Press the selection button ¿, until ECO MODE
and the current setting (OFF) is displayed.
3. Press the setting button @, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
ECO is displayed in the fascia.
Switching off
1. Press setup button.
2. Press the selection button ¿, until ECO MODE
and the current setting (ON) is displayed.
3. Press the setting button A, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
Alarm function
Switching off the warning signal
Press the “alarm” button to switch off the warning
signal.
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.
Usable capacity
Information on the usable capacity can be found inside
your appliance on the rating plate (see diagram at
chapter “Customer service”).
Freezer compartment
Use the freezer compartment:
■ To store deep-frozen food.
■ To freeze food.
■ To make ice cubes.
Note
Ensure that the freezer compartment door is always
closed properly. If the door is open, the frozen food will
thaw. The freezer compartment will become covered
in thick ice.
Also: Energy will be lost due to high power
consumption.
Purchasing frozen food
■ Packaging must not be damaged.
■ Use by the “use by” date.
■ Temperature in the supermarket freezer must be
-18 °C or lower.
■ If possible, transport deep-frozen food in an
insulated bag and place quickly in the freezer
compartment.
Page 11
en
11
Freezing fresh food
Freeze fresh and undamaged food only.
To retain the best possible nutritional value, flavour and
colour, vegetables should be blanched before freezing.
Aubergines, peppers, zucchini and asparagus do not
require blanching.
Literature on freezing and blanching can be found
in bookshops.
Note
Keep food which is to be frozen away from food which
is already frozen.
■ The following foods are suitable for freezing:
Cakes and pastries, fish and seafood, meat, game,
poultry, vegetables, fruit, herbs, eggs without shells,
dairy products such as cheese, butter and quark,
ready meals and leftovers such as soups, stews,
cooked meat and fish, potato dishes, soufflés and
desserts.
■ The following foods are not suitable for freezing:
Types of vegetables, which are usually consumed
raw, such as lettuce or radishes, eggs in shells,
grapes, whole apples, pears and peaches, hardboiled eggs, yoghurt, soured milk, sour cream,
crème fraîche and mayonnaise.
Packing frozen food
To prevent food from losing its flavour or drying out,
place in airtight containers.
1. Place food in packaging.
2. Remove air.
3. Seal the wrapping.
4. Label packaging with contents and date of freezing.
Suitable packaging:
Plastic film, tubular film made of polyethylene,
aluminium foil, freezer containers.
These products are available from specialist outlets.
Unsuitable packaging:
Wrapping paper, greaseproof paper, cellophane, bin
liners and used shopping bags.
Items suitable for sealing packaged food:
Rubber bands, plastic clips, string, cold-resistant
adhesive tape, etc.
Bags and tubular film made of polyethylene
can be sealed with a film heat sealer.
Shelf life of frozen food
Depends on the type of food.
At a temperature of -18 °C:
■ Fish, sausage, ready meals and cakes and pastries:
up to 6 months
■ Cheese, poultry and meat:
up to 8 months
■ Vegetables and fruit:
up to 12 months
Super freezing
Food should be frozen solid as quickly as possible in
order to retain vitamins, nutritional value, appearance
and flavour.
To prevent an undesirable temperature rise when
placing fresh food in the freezer compartment, switch
on super freezing several hours beforehand. As a rule,
4–6 hours is adequate. 24 hours are necessary when
using the maximum freezer capacity fully.
After 2 days the temperature set before super freezing
is automatically restored.
Switching on
Press super freezing button.
The display panel indicates the symbol SUPER¾ and
the compartment for which the function was switched
on.
Switching off
Press super freezing button.
Thawing frozen food
Depending on the type and application, select
one of the following options:
■ at room temperature
■ in the refrigerator
■ in an electric oven, with/without fan assisted hot-air
■ in the microwave
ã=Caution
Do not refreeze food which is beginning to thaw
or which has already thawed. It can only be refrozen
when it has been used to prepare a ready meal (boiled
or fried).
No longer store the frozen produce for the max.
storage period.
Page 12
en
12
Ice maker
The ice maker makes ice cubes.
The ice maker starts to make ice cubes as soon as
the appliance has reached the set temperature. If
the ice cube container is full, the ice maker
automatically switches off.
The ice maker can make approx. 1.3 kg ice cubes
within 24 hours.
ã=Caution
Do not place bottles or food in the cube container in
order to cool them quickly. The ice maker may block
and be damaged.
Switching on
Note
If the ice maker is used for the first time and/or a long
period of not being used, do not use the ice which is
produced in the first day for hygiene reasons. Throw
the ice cubes away and clean the container!
1. Make sure that ice maker container is in its place
and locked into position.
2. Press ice maker button .
The symbol ICE is lit on the display panel.
Switching off
Note
Before switching off the ice maker, it is most important
that you switch the water supply to the appliance off for
afew hours.
Press ice maker button.
Ice and water dispenser
(not all models)
The following can be dispensed as required:
■ cooled water,
■ crushed ice,
■ ice cubes.
ã=Warning
Never reach into the ice cube dispenser opening! Risk
of injury!
ã=Caution
Do not place bottles or food in the cube container
in order to cool them quickly. The ice maker may block
and be damaged.
Using the ice and water dispenser
The ice and water dispenser only works when
the appliance is connected to the water mains.
When the appliance has been switched on, it takes
approx. 24 hours until the first batch of ice cubes are
ready.
When the appliance has been connected, there are still
air bubbles in the lines.
Run off drinking water and pour away until water can be
dispensed without bubbles. Pour away the first 5
glasses.
When using the ice maker for the first time, do not use
the first 30-40 ice cubes for reasons of hygiene.
Operating the ice maker
When the freezer compartment has reached its freezing
temperature, water flows into the ice maker and freezes
into ice cubes. When the ice cubes are ready, they are
automatically discharged into the ice cube container.
Occasionally the sides of the ice cubes stick together.
When they are conveyed to the outlet opening, they
usually break away from each other.
When the ice cube container is full, ice making
switches off automatically.
The ice maker can make approx. 100 ice cubes within
24 hours.
Note
To prevent ice cubes from sticking together, a rotating
metal screw (agitation function) can be switched on for
2 sec. (see chapter Getting to know your appliance, Ice
and water dispenser controls).
Observing drinking water quality
All materials used in the drinks dispenser are odourless
and tasteless.
If the water has an aftertaste, this may be caused by:
■ Mineral and chlorine content of the drinking water.
■ Material of the domestic water line and connection
line.
■ Freshness of the drinking water. If water has not
been dispensed for a long time, the water may have
a “stale” taste. In this case fill approx. 15 glasses
of water and throw away.
We recommend that you regularly dispense a little
fresh water from the water maker and that you do not
switch off the appliance. This will ensure that the best
water quality is retained.
Taste and odour of the water may be improved by
installing the enclosed water filter in the water supply.
The enclosed water filter will filter only particles out
of the supply water, not bacteria or microbes.
Page 13
en
13
Dispensing ice/water
■ Select the ice and water dispenser button (water,
crushed ice or ice cubes).
■ Keep pressing the button until the required quantity
is in the glass.
Dispensing water
Note
The water from the water dispenser is cooled
to a palatable temperature. If you would like the water
colder, place ice cubes in the glass before dispensing
the water.
Dispensing ice
ã=Caution
Do not use the ice dispenser for longer than 3 minutes
within a time period of 15 minutes. Wait for a few
minutes more before ordering more. Risk of damage
to the appliance!
Water filter
ã=Warning
Do not use the appliance in places where the water
quality is risky or not sufficiently known about without
suitable disinfection, before and after filtering.
A filter cartridge for filtering particles can be obtained
from customer service or a specialist dealer.
ã=Caution
■ After installing a new filter, always discard the ice
produced within the first 24 hours after switching on
the ice maker.
■ If the ice has not been used for a prolonged period,
pour all ice cubes out of the container and also
discard the ice produced within the next 24 hours.
■ If the appliance or the ice has not been used actively
for several weeks or months or if the ice cubes have
an unpleasant taste or odor, change the water filter.
■ Air trapped in the system may cause water
to escape and the filter cartridge to be ejected.
Caution when removing.
■ The filter must be changed at least every 6 months.
Note
After use, the water system is subject to low pressure.
Be careful when removing the filter!
Exchanging the filter cartridge
1. Turn the filter cap on the base of the appliance by
90-180° anti-clockwise.
2. Pull out the filter cartridge.
3. Take a new filter cartridge from the packet
and remove the protective cap.
4. Take the filter cap off of the used filter cartridge.
5. Place the filter cap on the fresh filter cartridge.
6. With the filter cap in a horizontal position, feed
the filter cartridge into the opening on the appliance
base as far as it will go.
7. Turn the filter cartridge 90-180° in a clockwise
direction.
8. Pour water out of the used filter cartridge. The filter
cartridge can be disposed of in the household
rubbish.
Page 14
en
14
Specification and performance
data sheet
For filter model: 9000 077 095
Using replacement cartridge: 9000 077 104
The model was tested by NSF International with
reference to ANSI/NSF Standards 42 & 53
and certified for a reduction in the substances cited
below.
The concentration of the indicated substances which
are dissolved in water and penetrate the system was
reduced to a value below or equal to the permitted limit
value in accordance with ANSI/NSF 42 and 53
for water discharged out of the appliance.
Note
Even though the tests were conducted under standard
laboratory conditions, the actual performance may
deviate from these tests.
* Based on the use of Cryptosporium parvum ocysts.
Application guidelines / Water supply parameters:
■ The system is to be installed and operated
according to the guidelines recommended by
the manufacturer.
■ The filter is to be changed every 6-9 months.
■ Rinse new filter thoroughly for 5 minutes.
■ More detailed information can be found on
the warranty card.
Without appropriate disinfection before and after
connecting it to the system, this product should NOT
be used if the water is microbiologically
contaminated or if the quality has not been
ascertained. A system certified for cyst reduction
should be used for disinfected water which possibly
contains filterable cysts.
A one-year warranty is issued for the entire system
(except disposable cartridge). With reference
to disposable cartridges a warranty is issued for
material and processing faults only. As the service life
of disposable cartridges depends on the local water
conditions, no warranty is issued for them.
More detailed information on the prices of spare parts
is available from your appliance dealer or parts
salesman on site.
Manufactured by:
Cuno Engineered Products
1000 Apollo Road
Eagan, MN 55121-2240 U.S.A.
The system was tested and certified on model
9000 077 095 by NSF International with reference
to ANSI/NSF Standard 53 for a reduction in cysts
and turbidity, as well as with reference to ANSI/NSF
Standard 42 for a reduction in the taste and odour
of chlorine.
Nominal particle class: I
Nominal service life: 2.800 litres
Substance Average
in inflow
Inflow
concentration
Waste water
concentration
Average
reduction as
%
Max.
permitted
concentration
in waste water
Max.
waste
water
Min.
reduction as
%
NSF test
Cysts * 166.500 Min. 50.000/l 1 99.99 99.95 1 99.99 511077-
03
Turbidity 10.7 11 x 1 NTU 0.3 l 97.10 0.5 NTU 0.49 95.42 511078-
03
Particle
class I
Particle
size > 0.5
to < 1.0 μ
m
5.700.000 At least
10.000
particles/ml
30.583 99.52 > 85% 69.000 98.9 51107903
Taste
of chlorine
and
turbidity
1.9 2.0 mg/l + 10%
0.05 97.3 > 50% 0.06 96.84 51108103
Water pressure 207 - 827 kPa
Water temperature * 0.6 °C - 38 °C
Flow rate 2.83 l/min.
Page 15
en
15
Interior fittings
Taking out the shelves
You can reposition the shelves inside the appliance
and the door shelves as required.
Lift the shelves and remove.
Shelves inside the compartment
Door shelves
Containers in the freezer compartment
The containers in the freezer compartment can be
taken out for cleaning.
1. Lift container slightly and take out.
2. Lift container at front slightly and insert into the
runners.
3. Lower container and push back.
Ice cube container
ã=Caution
A full ice cube container is heavy!
Note
Before removing the ice cube container, switch the ice
maker off, see “Ice maker”.
Page 16
en
16
Switching off and
disconnecting the appliance
Switching the appliance off
Press the On/Off button.
Pull out the mains plug.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
1. Before switching off, it is most important that you
switch the water supply to the appliance off for a few
hours.
2. Take all food out of the appliance.
3. Switch the appliance off.
4. Pull out mains plug or switch off fuse.
5. Empty and clean the ice cube container (see chapter
Cleaning the appliance).
6. Clean the appliance interior (see chapter Cleaning
the appliance).
7. Leave the appliance doors open to prevent odours
from forming.
Defrosting
Defrosting is actuated automatically.
Cleaning the appliance
ã=Warning
Never clean the appliance with a steam cleaner!
ã=Caution
■ Do not use abrasive, chloride or acidic cleaning
agents or solvents.
■ Do not use scouring or abrasive sponges. The
metallic surfaces could corrode.
■ Never clean shelves and containers in
the dishwasher. The parts may become deformed!
Proceed as follows:
1. Before cleaning: Switch the appliance off.
2. Pull out the mains plug or switch off the fuse.
3. Take out the frozen food and store in a cool location.
Place the ice pack (if enclosed) on the food.
4. Clean the appliance with a soft cloth, lukewarm
water and a little pH neutral washing-up liquid. The
rinsing water must not run into the light.
5. Wipe the door seal with clear water only and then
wipe dry thoroughly.
6. After cleaning reconnect and switch the appliance
back on.
7. Put the frozen food back in the freezer compartment.
Interior fittings
All variable parts of the appliance can be taken out
for cleaning (see chapter Interior fittings).
Cleaning the ice cube container
If ice cubes have not been dispensed for a prolonged
period, they will shrink, have a stale taste and stick
together. Therefore, the ice cube container should be
cleaned regularly.
ã=Caution
A full ice cube container is heavy.
1. Remove the ice cube container.
2. Pull out the container, empty and clean with
lukewarm water.
3. Thoroughly rub the container and screw conveyor
(for appliances with Agitation function) dry so that
new ice cubes cannot freeze to them.
4. Insert ice cube container and push back until it
engages. If the container cannot be pushed all
the way back, twist the screw conveyor
in the container.
Ice cube production continues.
Page 17
en
17
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorised technicians only.
Tips for saving energy
■ Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator, cooker).
If required, use an insulating plate.
■ Do not block the ventilation openings in
the appliance.
■ Allow warm food and drinks to cool down before
placing in the appliance!
■ When thawing frozen products, place them
in the refrigerator. Use the coldness of the frozen
food to cool food.
■ Open the appliance as briefly as possible.
■ Ensure that the freezer compartment door is always
closed properly.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing or water is
flowing into the ice maker.
Clicking
Motor, switches or solenoid valves are switching on/off.
Rumbling
Ready ice cubes from the ice maker are falling
into the ice cube container.
Preventing noises
The appliance is not level
Please align the appliance with a spirit level. Use
the height-adjustable feet or place packing underneath
them.
The appliance is not free-standing
Please move the appliance away from adjacent units
or appliances.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly if required.
Bottles or receptacles are touching each other
Move the bottles or receptacles slightly away
from each other.
Page 18
en
18
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following information.
Customer service will charge you for advice – even if the appliance is still under guarantee!
Appliance
Ice maker
Fault Possible cause Remedial action
Appliance has no refrigeration
capacity.
The light does not work.
The display does not illuminate.
Appliance has been switched off. Press the On/Off button.
Power failure. Check whether the power is on.
The fuse has been switched off. Check the fuse.
The mains plug has not been inserted
properly.
Check whether the mains plug is secure.
The refrigeration unit is
switching on more frequently
and for longer.
Appliance opened frequently. Do not open the appliance unnecessarily.
The ventilation openings have been
covered.
Remove obstacles.
Large quantities of fresh food are
placed in the freezer.
Activate “super” cooling and/or “super”
freezing.
The light (LED) does not work. The LED lamp is defective. Call customer service.
Light switch is jammed. Check whether it can be moved.
Display indicates “E..”. Electronics have detected a fault. Call customer service.
Display indicates
“LOWPOWER”.
The mains voltage falls below
the permitted limiting value.
When the mains voltage reaches
the stipulated value again, the warning
message goes out. If the warning message
lasts for longer, inform the energy supply
company.
Fault Possible cause Remedial action
The ice maker doesn’t work. Ice maker is not connected to
the mains supply.
Call customer service.
Ice maker does not contain any fresh
water.
Ensure that the water is properly connected.
The freezer compartment temperature
is too warm.
Check freezer compartment temperature
and, if required, set slightly colder.
The ice maker does not make
enough ice or the ice is
deformed.
The appliance or ice maker has only
just been switched on.
Approx. 24 hours is needed until ice
production starts.
A lot of ice has been taken. Approx. 24 hours is needed until the ice
cube container is filled again.
Low water pressure. Connect the appliance to the stipulated
water pressure only (see chapter
Connecting appliance, section Water
connection).
The water filter is bunged up or used. Change the water filter.
Page 19
en
19
Fault Possible cause Remedial action
The ice maker does not make
any ice.
The ice maker is switched off. Switch the ice maker on at the control panel.
The appliance is not supplied with
water.
Contact the installer or the water supply
company.
Water supply has kinks. Turn off the water supply at the shut-off tap.
Smoothen out the kinks, exchange where
necessary.
Low water pressure. Connect the appliance to the stipulated
water pressure only (see chapter
Connecting appliance, section Water
connection).
Temperature in the freezer space is
too warm.
Check freezer compartment temperature
and, if required, set slightly colder.
Ice cube container is not properly
inserted.
Check the position, re-insert where
necessary.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure
and damage to the appliance.
Ice maker sensor is blocked. Pull out and empty ice cube container.
Remove ice from the sensor.
Ice forms in the inflow hose to
the ice maker.
Low water pressure. Connect the appliance to the stipulated
water pressure only (see chapter
Connecting appliance, section Water
connection).
Shut off tap incorrectly opened. Open shut off tap fully.
Temperature in the freezer space is
too warm.
Set temperature slightly colder in the freezer
compartment.
Water runs from the appliance. The water connection hose is not
properly sealed.
Replace the hose with a manufacturer’s
original part.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure
and damage to the appliance.
The water pressure is less than
usual.
Low water pressure. Connect the appliance to the stipulated
water pressure only (see chapter
Connecting appliance, section Water
connection).
Shut off tap incorrectly opened. Open shut off tap fully and check for leaks.
Check the minimum through flow.
Incorrect shut-off tap installed. Incorrect taps can cause low water pressure
and damage to the appliance.
Water supply has kinks. Turn off the water supply at the shut-off tap.
Smoothen out the kinks, exchange where
necessary.
The water filter is bunged up or used. Change the water filter.
Page 20
en
20
Customer service
Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service
with the appliance product number (E-Nr.)
and production number (FD).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.
Repair order and advice on faults
Contact information for all countries can be found
on the enclosed customer service list.
GB 0844 8928999 Calls from a
BT landline
will be
charged at up
to 3 pence
per minute. A
call set-up fee
of up to
6pence may
apply.
IE 01450 2655
US 866 447 4363 toll-free
Page 21
Siemens-Electrogeräte GmbH
Carl-Wery-Straße 34
81739 München
Germany
*900079424*
9000729424
en 9112
Loading...