Siemens easyPocket basic, easyPocket advanced User Manual

Life sounds brilliant.

www.siemens.com/hearing

easyPocket basic
easyPocket advanced

User Guide

2 Content

Content

Your remote control 4

Overview 5
Display 6
Control buttons 8
Key lock switch 10
Programming connection 10

Batteries 11

Inserting batteries 11
Checking the battery status 13

Daily use 14

Adjusting the volume 14
Changing the hearing program 14
Turning on and off (mute) 16
Adjusting the tinnitus noiser level 18

Alarm clock 19

Setting the alarm clock 19
Ending the alarm 21
Turning the alarm clock off 22

Setup and service functions 23

Setting the time 23
Resetting volume and hearing program 25
Displaying contact data 26
Setting the language of the menu 26

3Content

Maintenance and care 27

Troubleshooting 28

Important information 29

Intended use 29
Explanation of symbols 29
Transport and storage conditions 29
Disposal information 30
Technical information 30
Conformance information 32

Important safety information 33

Personal safety 33
Product safety 36

Country-specic information 38

Your remote control4

Your hearing instruments are equipped with wireless
technology and can therefore be controlled by a remote
control.

Both easyPocket basic and easyPocket advanced
provide the same basic remote control functions for
listening and program change.

easyPocket advanced has additional comfort functions.

The operating distance of the remote control is
approximately 40 inches (1 meter).

uMake sure the distance between your remote control

and hearing instrument does not exceed the operating
distance.

CAUTION

Read this user guide thoroughly and completely
and follow the safety information in this document
to avoid damage or injury.

Your remote control

Your remote control 5

Overview

➊ Display

➋ Key lock switch

➌ Programming

connection

➍ Control buttons

➎ Program change button

➏ Volume up/down buttons

More functions are available in the menu. To enter
or exit the menu, press the volume up button and
the volume down button simultaneously.

Your remote control6

Display

All actions initiated with the remote control are

immediately reflected on the display.

For example, if you press the
volume up button, the following icon
is shortly displayed.

The remote control does not receive
information from your hearing
instruments. All actions that you
initiate with the controls of your hearing instruments are

not reflected on the remote control’s display.

Display of easyPocket basic

➊ Indicates change of

hearing program and
volume

➋ Alarm clock is activated

➌ Batteries of the remote

control are low

➍ Function of control

buttons

Your remote control 7

Display of easyPocket advanced

➊ Indicates change of

volume

➋ Program name

➌ Program icon

➍ Program number

➎ Alarm clock is activated

➏ Batteries of the remote

control are low

➐ Function of

programmable
control buttons

Power save mode

If the remote control is not used for some time, the
display automatically turns black. The remote control is
then in its power save mode.

uPress any button to activate the display again.

Your remote control8

Control buttons

You can quickly access two
functions with the control
buttons on the right hand
side of the remote control.

The control buttons of the
easyPocket advanced

can be congured by your

Hearing Care Professional.
Small icons on the display
show the functions.

Basic functions

Turn hearing instruments on or off.

Reset to default volume and hearing program.

Your remote control 9

Advanced functions (for easyPocket advanced only)

Tinnitus noiser level up.

Tinnitus noiser level down.

Adjust treble.

Adjust bass.

All other icons:
Shortcut to select a preferred hearing program.
The available icons and hearing programs depend on
your personal setup.

Your remote control10

Key lock switch

uTo prevent any accidental operation while

the remote control is in pockets or bags,
move the key lock switch to lock position
(red color visible).

When the key lock is active, all
buttons on the remote control
are disabled. The following icon
is displayed.

Programming connection

This connection is only to
be used by your Hearing
Care Professional for
programming the remote
control.

Batteries 11

The remote control uses two AAA batteries.

Inserting batteries

uSlide the battery compartment cover

in the direction of the arrow.

uInsert the batteries.

Make sure the "+" symbols on the
battery and compartment are aligned.

Batteries

Batteries12

uAttach the cover

by sliding it
onto the remote
control.

The current time setting is displayed. If you want to
change it, refer to section "Setting the time".