How it Works
Siemens
Loading...
Delta Style Series

Siemens Delta Profil Series, UP 241, UP 242, Delta Style Series, UP 243 Technical Product Information

...
Download
Page 1
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Product DELTA profil DELTA style
Pushbutton single, neutral
Pushbutton single, with I/O symbols
Pushbutton double, neutral
Pushbutton double, with I/O symbols
Pushbutton quadruple, neutral
Pushbutton quadruple, with I/O symbols
pearl grey 5WG1 241-2AB01 basalt black / metallic silver 5WG1 285-2AB01 titanium white 5WG1 241-2AB11 titanium white 5WG1 285-2AB11 anthracite 5WG1 241-2AB21 basalt black 5WG1 285-2AB21 silver 5WG1 241-2AB71 platinum metallic 5WG1 285-2AB41 titanium white / metallic silver 5WG1 285-2AB81
pearl grey 5WG1 242-2AB01 titanium white 5WG1 242-2AB11 anthracite 5WG1 242-2AB21 silver 5WG1 242-2AB71
pearl grey 5WG1 243-2AB01 basalt black / metallic silver 5WG1 286-2AB01 titanium white 5WG1 243-2AB11 titanium white 5WG1 286-2AB11 anthracite 5WG1 243-2AB21 basalt black 5WG1 286-2AB21 silver 5WG1 243-2AB71 platinum metallic 5WG1 286-2AB41 titanium white / metallic silver 5WG1 286-2AB81
pearl grey 5WG1 244-2AB01 titanium white 5WG1 244-2AB11 anthracite 5WG1 244-2AB21 silver 5WG1 244-2AB71
pearl grey 5WG1 245-2AB01 basalt black / metallic silver 5WG1 287-2AB01 titanium white 5WG1 245-2AB11 titanium white 5WG1 287-2AB11 anthracite 5WG1 245-2AB21 basalt black 5WG1 287-2AB21 silver 5WG1 245-2AB71 platinum metallic 5WG1 287-2AB41 titanium white / metallic silver 5WG1 287-2AB81
pearl grey 5WG1 246-2AB01 titanium white 5WG1 246-2AB11 anthracite 5WG1 246-2AB21 silver 5WG1 246-2AB71
Siemens AG UP 24x-28x_Taster, 7 pages Technical Manual Automation and Drives Group Electrical Installation Technology © Siemens AG 2008 Update: http://www.siemens.de/gamma P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/1
Page 2
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Product DELTA profil DELTA style
Frame
Bus coupling unit UP 110; UP 114
cut-out frames
ordered separately from the DELTA ranges
____
C5
C6
C7 C5
C4 C3
C5
C6
C7
C5
C4
C3
C1
C2
C5
C6
C4
C1 Bus coupling unit C2 Frame C3 Fixing screws *) C4 Basic pushbutton module *) C5 Rockers *) C6 Mounting rack *) C7 Recess *)
*) Scope of supply
C3
C7
C5
Diagram 1: Mounting the pushbutton
Product and Applications Description
There is an upper and a lower operating field on the pushbuttons. In the middle of the pushbutton there is a note panel in which pictograms can be inserted. This panel also contains display elements (LEDs) for orienta­tion lighting and also for status displays. Opposing rock­ers are combined to form a pair e.g. for defined switch­ing, dimming, controlling shutters and blinds. It is also possible to carry out the switching functions ON and OFF e.g. via a pushbutton “UP”. Using an application program, the flush-mounted pushbuttons give commands via the flush-mounted bus coupler for example to actuators for defined switching on/off, for dimming lamps, raising/lowering shutters or for louvre adjustment or other parameterisable func­tional units.
The device pushbutton is placed together with the rele­vant DELTA frame on the flush-mounted bus coupler and can only function in combination with the bus cou­pler UP and an appropriate application program, i.e. the pushbuttons (with bus coupler UP) consist of the de­vices (hardware) and the application programs (soft­ware).
The bus coupler UP and the relevant frame are not sup­plied with the device but must be ordered separately.
Using the ETS program, the application programs can be selected and the specific parameters and addresses can be assigned.
Technical Manual UP 24x-28x_Taster, 7 pages Siemens AG Automation and Drives Group Update: http://www.siemens.de/gamma © Siemens AG 200 Electrical Installation Technology Subject to change without prior notice P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/2
Page 3
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Application Programs
Pushbutton single
12 S1 On-off-toggle/Dim/Shu/Display 211301
• Pushbutton for
- switching On / OFF / toggle
- dimming
- blinds control
• 1 LED for status indication or orientation light
• 1 LED orientation light
20 S1 Rocker (BCU2) 907402 (when using UP 114)
• Pushbutton for
- switching On / OFF / toggle / bell function
- dimming
- 8 bit value
- blinds control
- scene 1 bit (recall/store)
• separate pushbutton objects for switching and value
• 1 LED for status indication via a separate LED object
• 1 LED orientation light
Pushbutton double
12 S2 On-off-toggle/Dim/Shu/Display 221301
• Pushbutton for
- switching On / OFF / toggle
- dimming
- blinds control
• 2 LEDs for status indication or orientation light
• 1 LED orientation light
20 S2 Rocker (BCU2) 907502 (when using UP 114)
• Pushbutton for
- switching On / OFF / toggle / bell function
- dimming
- 8 bit value
- blinds control
- scene 1 bit (recall/store)
• separate pushbutton objects for switching and value
• 2 LEDs for status indication via separate LED objects
• 1 LED orientation light
Pushbutton quadruple
12 S4 On-off/Dim/Shutter 241301
• Pushbutton for
- switching On / OFF / toggle
- dimming
- 8 bit value
- blinds control
• 4 LEDs for status indication or orientation light
• 1 LED orientation light
12 S4 On/Off/Toggle/Value 241901
• Pushbutton for
- switching On / OFF / toggle / bell function
- 8 bit value
• separate pushbutton objects
• 4 LEDs for status indication or orientation light
• 1 LED orientation light
20 S4 Rocker (BCU2) 907602 (when using UP 114)
• Pushbutton for
- switching On / OFF / toggle / bell function
- dimming
- 8 bit value
- blinds control
- scene 1 bit (recall/store)
• separate pushbutton objects for switching and value
• 4 LEDs for status indication via separate LED objects
• 1 LED orientation light
Siemens AG UP 24x-28x_Taster 7 pages Technical Manual Automation and Drives Group Electrical Installation Technology © Siemens AG 2008 Update: http://www.siemens.de/gamma P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/3
Page 4
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Installation instructions
• The device can be used for permanent interior instal- lations, in dry rooms and for insertion in flush-type boxes.
DANGER
V
• The device may only be installed and commissioned by an authorized electrician.
• The device may not be inserted in the same box as 230 V devices.
• The device may be used in switch sockets, if VDE approved devices have been used.
• The prevailing safety and accident regulations must be observed.
• The device may not be opened.
• For planning and construction of electric installations,
the relevant guidelines, regulations and standards of the respective country are to be considered.
Technical data
Power supply
• via the flush-mounted bus coupler
Operating elements
• 1, 2 or 4 pairs of rockers, idle in the middle position
• Number of switching cycles: > 20,000
Display elements
• per pair of pushbuttons 1 LED red for status display
e.g. pushbutton quadruple = 4 LEDs
• 1 LED red for orientation light
Connections
• 10-pole plug connector (PEI): for connection to the flush-mounted bus coupler
Mechanical data
• Housing: plastic
• Dimensions:
- DELTA profil (L x W x D ): 65 x 65 x 11 mm
- DELTA style (L x W x D ): 68 x 68 x 14 mm
• Weight: approx. 40 g
• Fire load: approx. 950 kJ ± 10 %
• Mounting: placed on the flush-mounted bus coupler
Electrical safety
• Degree of pollution (according to IEC 60664-2): 2
• Type of protection (according to EN 60529): IP 20
• Protection class (according to IEC 61140): III
• Overvoltage category (according to IEC 60664-1): III
• Bus: safety extra-low voltage SELV DC 24 V
• Device complies with EN 50090-2-2 and
IEC 60664-1: 1992
Reliability
o
• Rate of failure: 27 fit at 40
C
EMC requirements
• complies with EN 50081-1, EN 61000-6-2 and EN 50090-2-2
Environmental conditions
• Climatic withstand capability: EN 50090-2-2
• Ambient operating temperature: - 5 ... + 45 °C
• Storage temperature: - 25 ... + 70 °C
• Relative humidity (not condensing): 5 % to 93 %
Markings
• KNX / EIB
CE mark
• in accordance with the EMC guideline (residential and functional buildings) and the low voltage guideline
Technical Manual UP 24x-28x_Taster, 7 pages Siemens AG Automation and Drives Group Update: http://www.siemens.de/gamma © Siemens AG 200 Electrical Installation Technology Subject to change without prior notice P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/4
Page 5
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Location and function of the operating and display elements
Diagram 2: Location of display and operating elements
A1 Upper operating field A2 LEDs for display A3 LED as an orientation light A4 Lower operating field A5 Cover for pictograms
Pushbutton single
A5
A5
A5
Pushbutt on doub le
Pushbutt on quad ruple
A1
A2 A3
A4
A1
A2 A3
A4
A1
A2 A3
A4
Mounting
General description The pushbutton is placed together with the relevant
frame on the flush-mounted bus coupler. The flush-mounted bus coupler (C1) is connected to the flush-type box and fixed in position (refer to the installa­tion instructions for the bus coupler).
Mounting sequence
• Place the basic pushbutton module (C4, diagram 3) with the relevant frame (C2) on the flush-mounted bus coupler (C1) and press the one strongly upon the other.
Using fixing screws:
• If the fixing screws (C3) are used first of all the rockers (C5) have to be lifted out altogether. This can be achieved by inserting the screwdriver between the frames in the recess (C7) and applying leverage (dia­gram 4). Important: The pushbutton module (C4, diagram 3)
and the rockers (C5) together with the frame (C2) must be held down / pressed down.
• Screw down the fixing screws (C3).
• The rockers (C5) have to be orientated properly and
clicked upon the mounting rack (C6).
C5
C6
C4 C3
C7
C5
C5
C6
C4 C3
C7 C5
C5
C6
C4
C3
C7
C5
C1
C2
Diagram 3: mounting sequence
Siemens AG UP 24x-28x_Taster 7 pages Technical Manual Automation and Drives Group Electrical Installation Technology © Siemens AG 2008 Update: http://www.siemens.de/gamma P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/5
Page 6
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Drawing for mounting the fixing screws
C7
Pushbutton single
Pushbutton double / pushbutton quadruple
Holding down as shown with pushbutton single
Diagram 4: Lifting out the rockers
Inserting pictograms
• Lift out the pictogram cover (A5) with the screwdriver by applying leverage, during this hold down the pushbutton module (C4).
DELTA profil
• Insert the screwdriver into the slot (A2) until it reaches the stop and then wiggle it.
1)
Diagram 5: Lifting out the pictogram cover
• Lay the pictograms onto the foundation.
• Snap on the pictogram cover (A5) again.
DELTA style
1)
1) Insert the screwdriver between the frame and the pushbutton module.
2) Swivel the screwdriver towards the wall.
Diagram 6: Lifting out the pictogram cover
2)
2)
Technical Manual UP 24x-28x_Taster, 7 pages Siemens AG Automation and Drives Group Update: http://www.siemens.de/gamma © Siemens AG 200 Electrical Installation Technology Subject to change without prior notice P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/6
Page 7
GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1 UP 242, with I/O symbols 5WG1 242-2AB_1 Pushbutton double UP 243, neutral 5WG1 243-2AB_1 UP 244, with I/O symbols 5WG1 244-2AB_1 Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1 UP 246, with I/O symbols 5WG1 246-2AB_1 DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1 Pushbutton double UP 286, neutral 5WG1 286-2AB_1 Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
pictogram
foundation
X)
X)
pictogram
retaining tongue
foundation
Diagram 7: inserting the pictograms
• Snap on the pictogram cover (A5) again
Dismantling
Without fixing screws
• Remove the pushbutton (C4, diagram 3) completely together with the frame from the flush-mounted bus coupler (C1): a) with the mere hand b) with a screwdriver beneath the frame / wall
a)
Diagram 8: Dismantling
With fixing screws
• Remove the rockers as described at „Mounting / using fixing screws“.
• Screw out the fixing screws (C3)
• Snap on the rockers (C5) again
• Remove the whole pushbutton module (C4) as de-
scribed at „ Without fixing screws “.
b)
Dimension Diagram
Dimensions in mm
DELTA profil
65
65
10
DELTA style
68
68
General Notes
• The operating instructions must be handed over to the client.
• Any faulty device should be returned to the local Siemens office.
• If you have further questions concerning the product please contact our technical support:
! +49 (180) 5050-222 ! +49 (180) 5050-223 " www.siemens.com/automation/support-request
14
Siemens AG UP 24x-28x_Taster 7 pages Technical Manual Automation and Drives Group Electrical Installation Technology © Siemens AG 2008 Update: http://www.siemens.de/gamma P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/7
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use