Siemens CMCC1020, CMCC1420, CMCC1725, CMCC2120 User Manual

CCTV
Colour Monitors

User’s Manual

CMCC1020
CMCC1420
CMCC1725
CMCC2120

Fire & Security Products

Siemens Building Technologies

GB

Data and design subject to change
without notice. / Supply subject to
availability.
© Copyright by
Siemens Building Technologies AG

We reserve all rights in this document
and in the subject thereof. By
acceptance of the document the
recipient acknowledges these rights
and undertakes not to publish the
document nor the subject thereof in
full or in part, nor to make them
available to any third party without our
prior express written authorization,
nor to use it for any purpose other
than for which it was delivered to him.

17

Siemens Building Technologies
Fire & Security Products

19.05.2003

GB

Contents

1 Important Safeguards .............................................................................18

1.1 Product Safety and Elec tromagnetic Compatibility (EMC)..............................18

1.2 Manufacturer’s Conformity Declaration....................................................... 18

2 FCC Information..................................................................................... 19

3 Safety Precautions................................................................................. 20

4 General Featu res...................................................................................21

4.1 CMCC1020 FRONT AND REAR VIEW .......................................................22

4.2 CMCC1420 FRONT AND REAR VIEW .......................................................23

4.3 CMCC1725 FRONT AND REAR VIEW .......................................................24

4.4 CMCC2120 FRONT AND RE AR VIEW ....................................................... 25

4.5 Connections and Controls......................................................................... 26

4.5.1 Connections............................................................................................ 26

4.5.2 Controls.................................................................................................. 26

5 Operating Instructions........................................................................... 27

6 Package Contents.................................................................................. 27

18
Siemens Building Technologies

Fire & Security Products

19.05.2003

1 Important Safeguards

1.2 Product Safety and Electromagnetic
Compatibility (EMC)

This product is designed for use in general CCTV applications in living, business or
industrial environments. Please contac t the supplier of this device before using it in
medicinal and/or intrinsically-safe applications or in an industrial EMC environment.
The product must be installed according to the currently valid installation regulations for
EMC to guarantee the designed use and to prevent EMC problems.

1.3 Manufacturer’s Conformity Declaration

The manufacturer declares that the device supplied with this manual is
compliant with the essential protection requirements of the EMC
directive 89/336.
Beyond that, it is compliant with the requirements of standards
EN 55022:1998
EN 61000 -3-2:2000
EN 61000 -3-3:1995
EN 50130 -4: 1998 ( EN 61000-4-2,3,4,5,6,8,11)

In accordance with the above EU Directive, the EU Declaration of Conformity can be
made available to the authorities concerned by:

Siemens Gebäudesicherheit GmbH & Co. oHG,
Security
Siemensallee 84
76187 Karlsruhe

19

Siemens Building Technologies
Fire & Security Products

19.05.2003

GB

2 FCC Information

This equipment has been tested and found to comply with the limits for a class B digital
device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Ÿ Reorient or relocate the receiving antenna.
Ÿ Increase the separation between the equipment and receiver.
Ÿ Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Ÿ Consult the dealer or an experienced radio/TV technician for help.
Ÿ Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with emission limits.

Ÿ Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.