Page 1
Water Technologies
To Application
Return To
Supply
From Supply
Feedrate
Adjustment
Knob
Plunger
Re-Circulation
Diaphragm
Wallace & Tiernan
Chem-Ad® Series A
Diaphragm Metering
The Wallace & Tiernan Chem-Ad Series A is an electronically
controlled, motor driven diaphragm metering pump. It is
designed specifically for very low feedrate applications,
particularly sodium hypochlorite. The pump features a
unique, constant circulation liquid end with a calibrated,
adjustable plunger for precise feedrate control. This design
ensures consistent performance, even with chemicals that
tend to outgas, such as hypochlorite.
The Chem-Ad series of diaphragm metering pumps provided
by Siemens Water Technologies are designed to handle
the most demanding applications in the treatment of
potable water, swimming pools, wastewater and industrial
processes. A well-balanced range of capacities combines
with excellent reproducibility and optimal chemical
resistance. Chem-Ad metering pumps are of the positive
displacement-type driven by proven overload-proof motors.
Since they are available with a wide choice of configurations
ranging from manual to flow proportional to setpoint, these
pumps can cover any metering requirement.
Pump
Technical Information
TI 440.600-1 UA
The XL Series, shown below, features an integrated LED
display panel, touch-pad controls and multiple control
functions, including feedrate setpoint with closed-loop
control, flow/no-flow monitoring, batch operation and
feedrate display.
Key Benefits:
Dependable low capacity metering from 0.06
•
USGPH (0.2 LPH) to 0.44 USGPH (0.5 LPH) and back
pressures to 120 PSI (10 BAR @ 50 Hz)
Reliable metering of most multi-phase fluids,
•
particularly Sodium Hypochlorite, with integral
auto de-gasing
Flexible automatic signal input - analog or pulse
•
Simple user-friendly pump calibration
•
Continuous accurate chemical dosing
•
Suitable for unmanned installations with auto
•
controls and optional flow monitoring
Easy to read back-lit digital display of pump
•
capacity, strokes operating mode and alarm
Low maintenance PVDF head standard
•
Corrosion resistant IP65 enclosure
•
CE marked electronics
•
Page 2
Description
internal
82 %
I II III
The Chem-Ad Series A model features manual control, or
optional external control, and is designed to handle multi-
phase solutions that tend to out-gas.
Due to its unique design incorporating pre-feeding and
a gasket-free ceramic piston/cylinder unit the pump can
maintain a high reproducibility even when handling very low
feed rates at maximum stroke frequency.
Its smooth pulsation characteristics ensure high metering
accuracy and long life of diaphragms and valves. Due to its
unparalleled low noise level and its enclosure, IP65, the Chem-
Ad Series A is perfectly suitable for laboratories and humid
ambient conditions.
The basic model has an ON/OFF switch, a level switch input,
and alarm output connection. The standard liquid end made
of PVDF ensures a wide range of chemical resistance.
Controls
Manual - E11
Manual control on-line by means of a mechanical stroke
length adjustment via a two-turn knob graduated 0 to 100%.
An on/off switch is also provided. There are connections to
accept level input and alarm output.
Automatic - E30
The E30 Automatic option provides:
Manual on-line stroke frequency
•
regulation - from 0-100%.
External control by 0/4-20mA or
•
pulse input with stop function.
Alarm output/stroke pulse output.
•
Automatic - E60 (XL Model)
The automatic E60 (XL Model) includes:
An integrated LED display panel for easy to read,
•
clear indication of operating status and user friendly
programming.
A four key membrane touch pad simplifies function
•
selection.
Local or remote control via analog (0/4-20mA or 20-
•
4/0mA) or pulse input signals.
Sign a l scal i n g all o w s for
•
multiplying or division of the
pulse input signal.
Flow/no flow verification via an
•
optional flow monitor.
Automatic - E60 Plus (XL Model)
With the addition of an intelligent control package (ICP)
and Oval Gear Meter (OGM), the E60 becomes the full
featured E60 Plus and includes:
Se t po int cont rols wit h au tom a tic fre quen cy
•
compensation for constant chemical feed
Chemical consumption data logging
•
Real time feed rate display
•
Plug and play with calibration data storage on OGM
•
Adjustable flow alarm points
•
Spares and Accessories
Liquid End PM Kits® Parts
For every model of the Chem-Ad Series A, a corresponding
maintenance kit is available. This economically
priced package contains all spare and wear
parts for a prompt and quick maintenance of
the liquid end. The Chem-Ad series is available
with additional useful accessories.
Suction Lance
This option includes pre-wired, built-in low and
empty level switches, foot valve and strainer.
This option is recommended with the Series
A pump.
Oval Gear Meter
Intelligent Control Pack
Page 3
Options / Series A E11 E30 E60 E60 Plus
ON-OFF Button X X X X
Manual Stroke Length Control X X X X
Stroke Frequency Control X X X
Level Switch Input (low level and empty) X X X X
Power Cord and Plug X X X X
External Analog Input (0-20 or 4-20 mA) X X X
External Analog Input (0/4-20 mA) or (20-4/0 mA ) X X
Input Signal Scaling X X
External Pulse Input X X X
Remote On / Off X X X
Batch Mode & Pulse Storage X X
Alarm Output & Stroke Pulse Output X X X
Membrane Touch Pad X X
Flow Monitoring (OGM Required) X X
Integral Back-Lit Digital Display X X
Password Protection X X
Capacity Display X X
Multiple Language Display (English, German, French) X X
Flow Totalizing X
Set Point Control X
Selection Guide
To allow easy selection, the Chem-
Ad series is engineered to the
modular design principle. The
selection criteria shown below
provides a perfect guide to define
the right pump for the respective
duty.
SELECTION CODE (EXAMPLE)
CM 1 A4 E60 K F C 99 31
Valve Balls
C = Ceramic
O-Ring
F = Viton; E = EPDM;
K = FFPM/Isolast
Pump Head
K = PVDF
Control Mode
E60 = Auto Control with Digital
Display
E30 = Auto Control, Basic
E11 = Manual
Capacity
50HZ 60HZ
A1 = 0.20 LPH 0.06 USGPH
A2 = 0.50 LPH 0.16 USGPH
A3 = 0.09 LPH 0.29 USGPH
A4 = 0.90 LPH 0.44 USGPH
Voltage & Cycles
1 = 115 V. 60 Hz;
3 = 230 V. 50 Hz
Note - E60 Plus models require ICP & OGM combination.
Page 4
Technical Data
Maximum Capacity USGPH (LPH) 60 Hz
LPH @ 50 Hz
0.06 (0.24) 0.16 (0.6) 0.29 (1.08) 0.44 (1.68)
0.2 0.5 0.9 1.4
Max. Back Pressure 120 PSI, 60 Hz / 10 Bar, 50 Hz
Piston Diameter (mm) 3 4.76 6.34 8
Stroke Frequency Max. (SPM) @ 60/50 Hz 144 / 122
Capacity / Stroke Max. (cm3) 0.027 0.068 0.12 0.19
Accuracy ± 2 % over 10:1 range (minimum of 20 % stroke length)
Max. Suction Lift at 100%* 6 Ft (2 Meters)
Max. Back Pressure of Return 4.5 PSI / 0.3 Bar
Suction and Return 2m Duo Hose 6mm ID Supplied
Metering Discharge 1/4" OD x 0.040" Wall Thickness
2mm x 4mm 4mm x 6mm
Power Supply 115 V, 60 Hz (230 V, 50 Hz)
(Power Cord and Plug Supplied)
Current (mA) 115/230 VAC 172 @ 60 Hz / 81 @ 50 Hz
Max. Power Input (W) 115/230 VAC 18.7
Enclosure IP 65
Max. Ambient Temp. 104°F (40°C)
Insulation Class B
Alarm Output
Dry contact 24 V, 3 Amps AC/DC or 240 V, 3 Amps AC/DC
Low Level and Tank Empty Contact
mA Input 0/4-20 mA (E30) / 0/4-20 mA or 20-4/0 mA (E60 & E60 Plus)
Max. Impedance 50 Ohms
Pulse Input Dry contact, Min. 15 msec pulse width
E30 Max. Frequency - 144 Pulse/min., E60 & E60 Plus - 50 Hz
Stroke Signal Output 1 Pulse Per Stroke, Dry Contact Rated 24 V DC, 300 mA
Weight 6 lbs / 2.4 Kgs
Materials of Construction
Pump Head: PVDF
* Suction lifts with clean, wetted valves
Suction Lance with tank level switches is recommended for all capacities.
All data refers to water at 68ºF as per the instruction manual.
Metering Piston/Cylinder: Ceramic
Diaphragm: PTFE-EPDM Composite Diaphragm
Valves: PVDF
Valve Balls: Ceramic
O-Ring: FPM, or EPDM, FFPM/ Isolast
www.usfilter.com
Valve Springs: Hastelloy
Housing/Finish: Thermoplastic Polyester
The information provided in this brochure contains merely general descriptions or
characteristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed in the terms of contract. ChemAd and PM Kits are registered trademarks of Siemens.
Dimensions (See Literature)
CN 441.600 - Unit Dimensions
CN 441.601 - E11/E30 Control Panel
CN 441.630 - E60-E60 Plus Control Panel
CN 441.650 - OGM Dimensions
Siemens Water Technologies
1901 West Garden Road
Vineland, NJ 08360
www.usfilter.com
wtus.water@siemens.com
TI 440.600-1 UA 3/06
Tel: 856.507.9000
Fax: 856.507.4125
Subject to change without prior
notice
©Siemens 2006
Loading...