Siemens 4100 User Manual
SpeedStream®
4100 Modem
PPPoE Modem
Router
Quick-Start Guide
Part # 007-4009-001
• •
2
3
Before you begin,
Verify that the following items came with your DSL kit:
1 SpeedStream® Device
2 Documentation
3 Software Manual CD-ROM
(Router model only)
4 Power supply
5 RJ-45 Straight-through
Ethernet cable
6 RJ-11 DSL cable
1
2
3
Your service provider may include an Ethernet adapter, a line lter, and a wall-mount
lter in your DSL kit. If you received any of these items, follow the instructions
provided in this guide for basic installation. If you need further assistance installing
these items, please contact your service provider.
A PCI Ethernet adapter
B Line lter(s)
C Wall-mount lter
A
B
C
4
5
6
Step 1 >
Install Line Filters
Stand-alone Line Filter
Wall-mount Filter
Devices such as fax machines, caller
ID boxes, or phones that share
the same phone line as your DSL
account require a line lter, which
prevents noise from disrupting the
DSL signal on the phone line. Filters
can be in the form of a stand-alone
line lter or a wall-mount lter.
Stand-alone Line Filter
For each device that shares the
DSL phone line:
1. Unplug the device’s cord from
the phone jack.
2. Plug the lter into the
phone jack.
3. Plug the phone cord (or other
device cord) into the lter.
Wall-mount Filter
For a wall-mount phone, install a
wall-mount lter.
1. Remove the phone.
2. Connect the wall-mount lter
to the wall plate.
3. Reconnect the phone.
1
2
3
1
2
3
Loading...