Sico TUC22WPH1002BS Parts List
SICO AMERICA INC.
7525 Cahill Road
Minneapolis, MN 55439, USA
Customer Service: 1-800-424-0796
Website: www.sicoinc.com
MultiApp Table
TABLEUNPACKAGINGANDASSEMBLY
Page 1 of 2
Unpacking and Assembly Instructions:
1. With carton lying flat as shown on a level surface, remove banding and top cover.
2. Remove inner packaging containing caster beams.
3. Rotate base leg structure upward as shown.
4. Remove M10 bolts and lockwashers from leg posts. Do not discard.
5. Install Caster beams using saved hardware. Tighten securely.
6. Using 2 people, tip table up and out of carton.
Warning: Note orientation of Caster beams. Installing Caster Beams backwards will result in
instability of the table. Make sure the width of Caster beams match the width of the table top.
It is highly recommended to use a thread locking compound during this assembly.
© SICOAmerica Inc. 2007 Printed in USA 02/07 281060 Rev.B
SICOAmerica Inc., 7525 Cahill Road, Edina, Minnesota 55439-2745
SICO
USA: (800) 424-0796 • International: (952) 941-1700 • www.sicoinc.com
SICO AMERICA INC.
7525 Cahill Road
Minneapolis, MN 55439, USA
Customer Service: 1-800-424-0796
Website: www.sicoinc.com
IMPORTANT: Always provide the
serial number when ordering parts.
Page 2 of 2
MultiApp Table
PARTS LIST
SICO America Inc. reserves the right to substitute materials or make changes if materials are not available or
such changes improve the product.
© SICOAmerica Inc. 2007 Printed in USA 02/07 281060 Rev.B
SICOAmerica Inc., 7525 Cahill Road, Edina, Minnesota 55439-2745
SICO
USA: (800) 424-0796 • International: (952) 941-1700 • www.sicoinc.com
Loading...