Shuttle POS01 User Manual
2015 by Shut
t
Computer
G
m
(
Ger
many
)
.
ormatio
j
t t
o chang
w
thout no
t
. Pictur
o
r
t
rat
o
rpo
only
.
y
Product Specification
COM / LPT / RJ11 port expansion
for Shuttle XPC aio X50V4 and X50V5
The Shuttle accessory POS01 is compatible with the Shuttle XPC
All-in-One- X50V4 and X50V5. It will add four serial (COM), one
parallel (LPT) port and one RJ11 port for a cash drawer to the
back panel of the PC.
Feature Highlight
Product
External ports
External power
Name: Shuttle Accessory POS01
UPC code: 887993800004
2x Serial port (Sub-D, 9 pins, male)
2x Serial port (RJ45 connector)
1x Parallel port (Sub-D, 25 pins, female)
1x Digital I/O for cash drawer (DIO, RJ11
connector, 12V or 24V)
Both serial ports with D-Sub connector
can provide an auxiliary voltage supply
of either 5V or 12V
Shuttle Accessor
POS01
Images for illustration purposes only.
ses
n pu
i
illus
es f
ice
Scope of
delivery
Compatibility
Printed Circuit Board (PCB)
4 screws
Power connector cable (4 pin)
Ribbon cable
Type label sticker (Rating label)
Multi-language quick installation guide
(EN, DE, FR)
Compatible with the Shuttle XPC All-in-
One-X50V4 and X50V5
i
e
ec
n sub
All inf
bH
Handels
le
©
Page 1 | 23 May 2016
www.shuttle.com
X50V4 without POS01 X50V4 with POS01 installed
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
sales@shuttle.eu
2015 by Shut
t
Computer
G
m
(
Ger
many
)
.
ormatio
j
t t
o chang
w
thout no
t
. Pictur
o
r
t
rat
o
rpo
only
.
V12V
Product Specification
Quick Installation Guide:
Caution: Due to safety reasons, please turn off your computer completely first and unplug it from
the adapter.
1. Remove the cover on the back of the X50V4/V5 first, unscrew four screws of the stand mount and
remove the stand.
2. Unscrew four screws of the back cover and remove it.
3. The back cover to prejudge the holes (COM3,COM4,DIO)
must first break open.
4. Please connect the power connectors to CON1 (4-pin)
and connect the ribbon cable to "CON2", then slide two
latches into the lock position.
Pull up two latches of "CON2" first, then plug the ribbon cable to "CON2".
ses
n pu
i
illus
Jumper settings:
JP2: COM1,COM2 PIN9 Fuction Select
J1 PIN3: Power Select
Default:
24
es f
ice
i
e
ec
n sub
All inf
bH
Handels
le
JP3
JP7
JP3
JP7
©
Page 2 | 23 May 2016
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
sales@shuttle.eu
Loading...