Shuttle PCL71 User Manual
2015 by Shut
t
Computer
G
m
(
Ger
many
)
.
ormatio
j
t t
o chang
w
thout no
t
. Pictur
o
r
t
rat
o
rpo
only
.
y
Product Specification
COM/LPT port expansion for
Shuttle XPC aio X50V4 and X50V5
The Shuttle accessory PCL71 is compatible with the Shuttle XPC
All-in-One- X50V4 and X50V5. It will add two serial (COM) and
one parallel (LPT) port to the back panel of the PC.
Feature Highlight
Product
External ports
External power
Scope of
delivery
Name: Shuttle Accessory PCL71
UPC code: 887993800011
2x Serial port (Sub-D, 9 pins, male)
1x Parallel port (Sub-D, 25 pins, female)
Both serial ports can provide an
auxiliary voltage supply of either 5V or
12V
Printed Circuit Board (PCB)
4 screws
Ribbon cable
Type label sticker (Rating label)
Multi-language quick installation guide
(EN, DE, FR)
Shuttle Accessor
PCL71
Images for illustration purposes only.
ses
n pu
i
illus
es f
ice
i
e
Compatibility
Compatible with the Shuttle XPC All-in-
One- X50V4 and X50V5
ec
n sub
All inf
bH
Handels
le
©
Page 1 | 23 May 2016
www.shuttle.com
X50V4 without PCL71 X50V4 with PCL71 installed
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
sales@shuttle.eu
2015 by Shut
t
Computer
G
m
(
Ger
many
)
.
ormatio
j
t t
o chang
w
thout no
t
. Pictur
o
r
t
rat
o
rpo
only
.
Jumper setting
Jumper JP1
Product Specification
Power over serial port
Both serial ports can provide a voltage supply of either 0V, 5V or 12V over
Pin 9 (Ring pin) of the D-Sub connector depending of the jumper setting.
This voltage can be used to supply external devices. With jumper JP1 you
can configure the voltage.
Pin 9
Quick Installation Guide:
Due to safety reasons, please turn off your computer
completely first and unplug it from the adapter.
1. Remove the cover on the back of the X50V4 first,
unscrew four screws of the stand mount and remove
the stand.
2. Unscrew four screws of the back cover and remove
it.
3. Connect the ribbon cable to "CON1", then slide
two latches into the lock position.
Pull up two latches of "CON1" first, then plug the
ribbon cable to "CON1".
Jumper settings/ Jumper-Konfiguration/ Reglage des
cavaliers (JP1) :
4. Tear off the adhesive membrane, fold and fix the
adhesive ribbon cable to the chassis rail.
Adhesive
5. Tighten the PCL71 COM/LPT Port with four screws.
6. Connect the ribbon cable to "CON3", then slide
two latches into the lock position.
4 Screws Blue Side UP
7. Remove the back cover original rating label, then
paste the rating label which sits in the accessory box.
8. Replace the back cover.
9. Refasten the stand and the back cover with eight
screws.
10. Replace the cover, complete.
ses
n pu
i
illus
es f
ice
i
e
ec
n sub
All inf
bH
Handels
le
©
Page 2 | 23 May 2016
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
sales@shuttle.eu
Loading...