Shuttle NC03U User Manual

BIOS User Guide

For the :

NC03U

Shuttle®

Installation Guide

Copyright

©2016 by Shuttle® Inc. All Rights Reserved.

No part of this publication may be reproduced, transcribed, stored in a retrieval sys­tem, translated into any language, or transmitted in any form or by any means such as
electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,
without prior written permission from us.

Other brands and product names used herein are for identification purposes only and
may be trademarks of their respective owners.

Disclaimer

We shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.

We make no representation or warranty regarding the contents of this ma­nual. Information in this manual had been carefully checked for accuracy;however, no
guarantee is given as to the correctness of the contents. For continuing product improve­ment, we reserve the right to revise the manual or make changes to the specifications of
this product at any time without notice and obligation to any person or entity regarding
such change. The information contained in this manual is provided for general use by
customers.

This device complies to Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference.

2. This device must withstand any background interference including those that may
cause undesired operation.

Trademarks

Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice

Other brand and product names used herein are for identification purposes only and
may be trademarks of their respective owners.

Safety Information

Read the following precautions before setting up.

CAUTION

Incorrectly replacing the battery may damage this co-mputer. Replace
only with the same or equivalent type recommended by the manufacturer.

Disposal of used batteries according to the manufacturer's instructions.

Installation Notices

Do not place this device underneath heavy loads or in an
unstable position.

Do not expose this device to high levels of direct sunlight,

high-humidity or wet conditions.

Do not use or expose this device around magnetic

elds as magnetic interference may affect the

performance of the device.

Do not block the air vents to this device or impede

the airow in any way.

TABLE OF CONTENTS

Driver and Software Installation............................................................... 1

Motherboard Driver DVD .................................................................. 1

User Manuals ................................................................................... 2

Appendix.................................................................................................. 3

Starting BIOS ................................................................................... 3

BIOS Setup Menu ............................................................................ 3

Main Setup ................................................................................ 5

Advanced .................................................................................. 6

TPM Con󰘰guration ................................................................ 7

CPU Con󰘰guration ................................................................ 8

SATA Con󰘰guration ............................................................ 10

USB Con󰘰guration .............................................................. 10

Onboard Device Con󰘰guration ............................................ 11

Power Management Con󰘰guration ...................................... 13

Hardware Health Con󰘰guration ........................................... 14

Boot ......................................................................................... 15

Security ................................................................................... 17

Exit .......................................................................................... 19

Driver and Software Installation



Motherboard Driver DVD

The DVD contents attached in NC03U Series motherboard are subject to
change without notice.

The Motherboard Driver DVD contains all the motherboard drivers necessary to
optimize the performance of this Shuttle Xvision in a Windows® OS. Install these

drivers after installing Microsoft® Windows®.

Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen
should appear. If the AutoRun screen does not appear, double click on Autorun

icon in My Computer to bring up Shuttle Mainboard Software Setup screen.

Navigation Bar Description :

Auto Install Driver/Utility



Install Intel Rapid Storage Tech. Driver



English

User Manuals - Motherboard Manual, Quick Guide.



Link To Shuttle Website - Link to shuttle website homepage.



Browse This DVD - Allows you to see contents of this DVD.



1

English



User Manuals

Install Adobe Reader 9.5



Motherboard Manual



Quick Guide



2

Appendix

Starting BIOS

AMIBIOS has been integrated into many motherboards for over a decade. In the past,
people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or CMOS
setup.

American Megatrends refers to this setup as BIOS. Specically, it is the name of the

AMIBIOS BIOS setup utility. This chapter describes the basic navigation of the BIOS
setup screens.

Enter the BIOS

To enter the BIOS setup screens, follow the steps below:

Step1. Power on the motherboard.

Step2. Press the <Delete> key on your keyboard when you see the following
text prompt: Press DEL to run Setup.

Step3. After you press the <Delete> key, the main BIOS setup menu displays.
You can access the other setup screens from the main BIOS setup menu,
such as the Chipset and Power menus.

English

This manual describes the standard look of the BIOS setup screen.
The motherboard manufacturer has the ability to change any and all of the
settings described in this manual. This means that some of the options
described in this manual do not exist in your motherboard's AMIBIOS.

In most cases, the <Delete> key is used to invoke the BIOS setup screen.
There are a few cases that other keys are used, such as <F1>,<F2>, and
so on.

BIOS Setup Menu

The main BIOS setup menu is the rst screen that you can navigate. Each main

BIOS setup menu option is described in this user’s guide.

The Main BIOS setup menu screen has two main frames. The left frame displays all
the options that can be congured. “Grayed-out” options cannot be congured.
Options is blue can be.

The right frame displays the key legend. Above the key legend is an area reserved for
a text message. When an option is selected in the left frame, it is highlighted in white.

Often a text message will accompany it.

3

English

AMIBIOS has default text messages built into it. The motherboard manufacture
retains the option to include, leave out, or change any of these text messages.
They can also add their own text messages. Because of this, many screen
shots in this manual are different from your BIOS setup screen.

The BIOS setup/utility uses a key-based navigation system called hot keys. Most of

the BIOS setup utility hot keys can be used at any time during the setup navigation
process. These keys include <F1>, <F4>, <Enter>, <ESC>, <Arrow> keys, and so
on.

There is a hot key legend located in the right frame on most BIOS setup screens.

Hot Key Description

→ Left

← Right

↑ Up

↓ Down

+- Plus/Minus

Tab The <Tab> key allows you to select BIOS setup elds.

F1

F4

ESC

The Left and Right <Arrow> keys allow you to select a BIOS setup screen.

For example: Main screen, Advanced screen, Chipset screen, and so on.

The Up and Down <Arrow> keys allow you to select an BIOS setup item or sub-

screen.

The Plus and Minus <Arrow> keys allow you to change the field value of a
particular setup item. For example: Date and Time.

The <F1> key allows you to display the General Help screen.
Press the <F1> key to open the General Help screen.

The <F4> key allows you to save any changes you have made and exit BIOS
Setup. Press the <F4> key to save your changes. Press the <Enter> key to save

the conguration and exit. You can also use the <Arrow> key to select Cancel and

then press the <Enter> key to abort this function and return to the previous screen.

The <Esc> key allows you to discard any changes you have made and exit the
BIOS Setup. Press the <Esc> key to exit the BIOS setup without saving your
changes. Press the <Enter> key to discard changes and exit. You can also use the
<Arrow> key to select Cancel and then press the <Enter> key to abort this function
and return to the previous screen.

The <Enter> key allows you to display or change the setup option listed for a

Enter

4

particular setup item. The <Enter> key can also allow you to display the setup sub-

screens.

Main Setup



When you rst enter the BIOS Setup Utility, you will enter the Main setup screen.

You can always return to the Main setup screen by selecting the Main tab. There are
two Main Setup options. They are described in this section. The Main BIOS Setup
screen is shown below.

English

System Time/System Date

Use this option to change the system time and date. Highlight System Time or Sys­tem Date using the <Arrow> keys. Enter new values through the keyboard. Press the

<Tab> key or the <Arrow> keys to move between elds. The date must be entered in

MM/DD/YY format. The time is entered in HH:MM:SS format.

The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00,
and 5:30 P.M. as 17:30:00.

5

English

Advanced



Select the Advanced tab from the BIOS setup screen to enter the Advanced BIOS
Setup screen. You can select any of the items in the left frame of the screen, such as

CPU Conguration, to go to the sub menu for that item.

You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>
keys. All Advanced BIOS Setup options are described in this section.

The Advanced BIOS Setup screen is shown below. The sub menus are described on
the following pages.

6

TPM Conguration



English

Security Device Support

This item allows you to enable or disable fTPM.

The choice: Enabled , Disabled.



7

English

CPU Conguration



You can use this screen to select options for the CPU Conguration Settings. Use the

up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. A description of the selected item appears
on the right side of the screen. The settings are described on the following pages. An

example of the CPU Conguration screen is shown below.

The CPU Conguration setup screen varies depending on the installed processor.

8

Intel(R) V. T.

When enable, a VMM can utilize the additional hardware capabilities provided
by vanderpool Technology.

The choice: Enabled , Disabled.



CPU support, item appear.

Active Processor Cores

This item allows you to determine how many cores to be enabled.

The choice: ALL,1.



EIST

This item allows you to enable or disable Enhanced lntel SpeedStep®
Technology.

The choice: Enabled , Disabled.



Turbo Mode

English

This item allows you to enable or disable Turbo Mode.

The choice: Enabled , Disabled.



C State Support

This item allows you to enable or disable CPU C State.

The choice: Enabled , Disabled.



Intel® HT Technology

This item allows you to enable or disable Intel(R) HT Technology.

The choice: Enabled , Disabled.



CPU support, item appear.

9

English

SATA Conguration



 USB Conguration

10

Onboard Device Conguration



English

High Denition Audio

This item allows you to enable or disable system High Denition Audio.

The choice: Enabled , Disabled.



Onboard LAN Function

This item allows you to enable or disable LAN Function.

The choice: Enabled , Disabled.



Onboard LAN BOOT ROM

This item allows you to enable or disable Onboard LAN BOOT ROM.

The choice: Enabled , Disabled.



M.2 Device Select

M.2 PCIE and SATA device selection.

The choice: PCIE, SATA.



11

English

IGD Memory Size Select

Allows you to select the size of system memory used by the internal graphics
device.

The choice: 64MB, 128MB, 256MB, 512MB, 1024MB.



Intel® VT-d

This item allows you to enable or disable Intel® VT-d.

The choice: Enabled, Disabled.



Serial Port Conguration

Option are in its sub-menu.

Press<Enter>to enter the sub-menu of detailed options.

Serial Port 1

Enalbed/Disabled Serial Port(COM).

The choice: Enabled, Disabled.



Serial Port 1 Address

The choice: 3F8h, 2F8h, 3E8h, 2E8h.



Serial Port 1 Mode

COM mode select.

The choice: RS232, RS422, RS485.



12

Power Management Conguration



English

Wake Up By USB (S3)

This item allows you to enable or disable system wake up by USB (S3).

The choice: Enabled , Disabled.



EuP Function

This item allows you to enable or disable system EuP function in S4/S5.

The choice: Enabled , Disabled.



Power-On after Power-Fail

This item allows you to set system power on automatically after AC power
restored.

The choice: Power On, Former-sts, Power Off, Power On by LAN,



Power On by RTC.

13

English

Wake Up By LAN

This item allows you to enable or disable system wake on by onboard LAN chip.

The choice: Enabled , Disabled.



PowerOn by RTC Alarm

When enabled, System will wake on the hr::min::sec specied.

The choice: Enabled , Disabled.



Hardware Health Conguration



14

Boot



Select the Boot tab from the BIOS setup screen to enter the Boot BIOS Setup screen.
You can select any of the items in the left frame of the screen, such as Boot Settings

Conguration, to go to the sub menu for that item.

You can display an Boot BIOS Setup option by highlighting it using the <Arrow> keys.
All Boot BIOS Setup options are described in this section.

The Boot BIOS Setup screen is shown below. The sub menus are described on the
following pages.

English

Bootup Num-Lock

Select NumLock state after system bootup.

The choice: Enabled, Disabled.



Boot from Card-Reader

Enabled/Disabled onboard Card-Reader boot function.

The choice: Enabled, Disabled.



15

English

Boot from USB device

Enabled/Disabled onboard USB storage boot function.

The choice: Enabled, Disabled.



Fast Boot Function

This item allows you to enable or disable Fast Boot Function.

The choice: Enabled, Disabled.



Boot Mode Select

Choice Boot ro UEFI or Legacy.

The choice: LEGACY, UEFI.



Boot Device Priority (Boot Option #1/2/3/....)

Species the boot sequence from the available devices. A device enclosed in

parenthesis has been disabled in the corresponding type menu.

16

Security



Select the Security tab from the BIOS setup screen to enter the Security BIOS Setup
screen. You can display an Security BIOS Setup option by highlighting it using the
<Arrow> keys. All Security BIOS Setup options are described in this section.

The Security Setup screen is shown below. The sub menus are documented on the
following pages.

English

Supervisor Password

Indicates whether a supervisor password has been set. If the password has

been installed, Installed displays. If not, Not Installed displays.

User Password

Indicates whether a user password has been set. If the password has been in­stalled, Installed displays. If not, Not Installed displays.

Change Supervisor Password

Select Change Supervisor Password from the Security Setup menu and press
<Enter>.

Enter New Password:

17

English

appears. Type the password and press <Enter>. The screen does not display

the characters entered. Retype the password as prompted and press <Enter>.

If the password confirmation is incorrect, an error message appears. The
password is stored in NVRAM after BIOS completes.

Change User Password

Select Change User Password from the Security Setup menu and press
<Enter>.

Enter New Password:

appears. Type the password and press <Enter>. The screen does not display

the characters entered. Retype the password as prompted and press <Enter>.
If the password conrmation is incorrect, an error message appears. The pass­word is stored in NVRAM after BIOS completes.

Password Login control

This item allows user to adjust Password Login control.

The choice: Setup, Boot, Both.



Flash Write Protection

Choose [Enabled] to avoid virus destroy BIOS. If you want to ash BIOS, you

must set it [Disabled].

The choice: Enabled or Disabled.



Secure Boot Control

This item allows user to enable/disable Secure Boot function.

18

Exit



Select the Exit tab from the BIOS setup screen to enter the Exit BIOS Setup screen.

You can display an Exit BIOS Setup option by highlighting it using the <Arrow> keys.
All Exit BIOS Setup options are described in this section.

The Exit BIOS Setup screen is shown below.

English

19

English

Save Changes and Exit

When you have completed the system conguration changes, select this option
to leave BIOS Setup and reboot the computer so the new system conguration

parameters can take effect.

Select "Save Changes and Exit" from the Exit menu and press <Enter>.

Save Conguration Changes and Exit Now?

[Ok] [Cancel]

appears in the window. Select Ok to save changes and exit.

Exit Without Saving Changes

Select "Exit without Saving Changes" from the Exit menu and press <Enter>.

Select Ok to discard changes and Exit.

Load Defaults Settings

BIOS automatically sets all BIOS Setup options to a complete set of default set­tings when you Select this option. The Optimal settings are designed for maxi­mum system performance, but may not work best for all computer applications.
In particular, do not use the Optimal BIOS Setup options if your computer is ex-

periencing system conguration problems.

Select Load Optimal Defaults from the Exit menu and press <Enter>.

Select Ok to load optimal defaults.

20