Shure orporated P9TD, P9TC, P9TB, P9TJ, P9TA Users manual

PSM®900

level L R menu sync volume power

CLIP

sync

Personal Monitor System User Guide

level L R menu sync volume power

CLIP

sync

>>SE425 >>P9R >>P9T

© 2010 Shure Incorporated
Printed in U.S.A.
27A12695 (Rev. 1)

Pat. 6597301;
Pat. App. Pending

ii

ENGLISH

WARNING!

USING THIS SYSTEM AT EXCESSIVE VOLUMES CAN CAUSE

PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.

In order to use this system safely, avoid prolonged listening at excessive sound pressure levels. Please use the fol-lowing guidelines
established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before
hearing damage occurs.

90 dB SPL at 8 hours

95 dB SPL at 4 hours

100 dB SPL at 2 hours

105 dB SPL at 1 hour

110 dB SPL at 1/2 hour

115 dB SPL at 15 minutes

120 dB SPL — avoid or hearing damage may occur

It is difcult to measure the exact Sound Pressure Levels (SPL) present at the eardrum in live applications. In addition to the volume
setting on the PSM, the SPL in the ear is affected by ambient sound from oor wedges or other devices. The isolation provided by
the t of quality earphones is also an important factor in determining the SPL in the ear.

Here are some general tips to follow in the use of this product to protect your ears from damage:

1. Turn up the volume control only far enough to hear properly.

2. Ringing in the ears may indicate that the gain levels are too high. Try lowering the gain levels.

3. Have your ears checked by an audiologist on a regular basis. If you experience wax buildup in your ears, stop using the sys­tem until an audiologist has examined your ears.

4. Wipe the earphones with an antiseptic before and after use to avoid infections. Stop using the earphones if they are causing
great discomfort or infection.

This symbol indicates important operating and

maintenance instructions in the literature accompanying this unit.

iii