Shure TL47, TL47B/O-XLR-A User Manual
© 2019 Shure Incorporated
Updated:03/19
Whilst every effort has been made to ensure that the information in this document is correct, we accept no liability
in respect of errors or omissions. All specifications within this document are subject to change without notice.
TwinPlex™ TL47 Subminiature Lavalier Microphones
Overview
The expressively natural sounding TwinPlex™ TL47 is available with color options and mounting choices for all professional applications. The low
sensitivity can handle critical acoustic environments without distortion and the 1.6 mm paintable cable stands up to the most demanding and
challenging situations. The TL47 is the go-to subminiature lavlier line for flexibility.
Features
• With a variety of colors, mounting options, and accessories, the TL47 is ideal for nearly any lavalier application
• Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the
patent pending dual-diaphragm design
• Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement
• Best-in-class low self-noise and dynamic range for cleaner audio production
• Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible superhydrophobic nanoscopic coating
• Paintable 1.6 mm cable that is immune to memory effect and kinks
• Dual redundant ground in cable serves as secondary shield for longevity
• Sound signature: Natural
• Sensitivity: Low
• Colors: Black, Cocoa, Tan, White
• Connectors: LEMO, MTQG/TA4F, XLR/Preamp, NC (bare wire)
• Accessories: Available with or without accessories
Specifications
Microphone Capsule Dual-Diaphragm, Prepolarized Condenser
Polar Pattern Omnidirectional
Frequency Response 20 Hz to 20 kHz
Sensitivity
at 1 kHz
Self-Noise,
A-Weighted, Equivalent Acoustical
Signal-To-Noise Ratio 69.5 dB
Output Clipping Level
Maximum SPL
Dynamic Range
Microphone Current Draw 120 to 240 µA, typical
Bias Voltage
Recommended Operating Voltage
Housing Molded ABS
Polarity
Cable Diameter 1.6 mm
Cable Length 66 in. (1.67 m)
Microphone Length 13.5 mm
Microphone Diameter 5.6 mm
Net Weight
with Cable
-45.0 dBV (5.62 mV)
24.5 dB SPL-A
3.0 dBV,1 kHz
at 1% THD, typical
142.0 dB SPL
1 kHz at 1% THD, typical
117.5 dB
typical
5 VDC
EMO, NC: Positive pressure at diaphragm leads to negative voltage with respect to ground MTQG,
L
XLR connector: Positive pressure at diaphragm leads to positive voltage with respect to ground
12.0 g (0.42 oz.)
™
TwinPlex
Subminiature Lavalier
TL47
Microphone
Available Models
TL47B/O-LEMO TwinPlex™ Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, Black
TL47B/O-LEMO-A TwinPlex
TL47B/O-MTQG TwinPlex
TL47B/O-MTQG-A TwinPlex
TL47B/0-NC-A TwinPlex
TL47B/O-XLR-A TwinPlex
TL47C/O-LEMO TwinPlex
TL47C/O-LEMO-A TwinPlex
TL47C/O-MTQG TwinPlex
TL47C/O-MTQG-A TwinPlex
TL47C/O-NC-A TwinPlex
TL47T/O-LEMO TwinPlex
TL47T/O-LEMO-A TwinPlex
TL47T/O-MTQG TwinPlex
TL47T/O-MTQG-A TwinPlex
TL47T/O-NC-A TwinPlex
TL47W/O-LEMO TwinPlex
TL47W/O-LEMO-A TwinPlex
TL47W/O-MTQG TwinPlex
TL47W/O-MTQG-A TwinPlex
TL47W/O-NC-A TwinPlex
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, Black with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, Black
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, Black with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with bare wire terminal, Black
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with XLR Connector, Black with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, Cocoa
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, Cocoa with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, Cocoa
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, Cocoa with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with bare wire terminal, Cocoa with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, Tan
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, Tan with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, Tan
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, Tan with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with bare wire terminal, Tan with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, White
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with LEMO Connector, White with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, White
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with MTQG Connector, White with Accessories
™
Subminiature Omnidirectional Lavalier, Low Sensitivity, 1.6 mm Cable with bare wire terminal, White with Accessories
© 2019 Shure Incorporated
Updated:03/19
Whilst every effort has been made to ensure that the information in this document is correct, we accept no liability
in respect of errors or omissions. All specifications within this document are subject to change without notice.
TwinPlex™ TL47 Subminiature Lavalier Microphones
Furnished Accessories
• Frequency Caps, Flat Response, Qty. 3
• Frequency Caps, Presence Response, Qty. 2
-A SKUs add:
• Single Tie Clip. Qty. 1
• Dual Tie Clip, Qty. 1
• Standoff for Tie Clip, Qty. 5
• Vampire Mount, Qty. 1
• Sticky Vampire Mount, Qty. 1
• Foam Windscreen, Qty. 2
• Clear Sticky Mount, Qty. 1
• Sticky Mount Adhesives, Qty. 10
• Storage Case for TL Lavalier, Qty. 1
Optional Accessories
Replacement Connectors Clips and Mounts Preamps
WA430 Replacement Neutrik mTQG connector kit, TA4F RPM40STC/B Single Tie Clip, Black, Qty. 3 RPM400TQG Wired TQG to XLR Preamplifier with Beltclip
WA435 Replacement Neutrik mTQG connector kit, TA5F RPM40STC/C Single Tie Clip, Cocoa, Qty. 3 RPM400LEMO Wired LEMO3 to XLR Preamplifier with Beltclip
WA445 Neutrik threaded collar shell for WA430/WA435 RPM40STC/T Single Tie Clip, Tan, Qty. 3
WA416 Replacement LEMO3, 1.6 mm connector RPM40STC/W Single Tie Clip, White, Qty. 3
Windscreens RPM40TC/B Dual Tie Clip, Black, Qty. 3
RPM40WS/B Windscreens,Black, Qty. 5 RPM40TC/C Dual Tie Clip, Cocoa, Qty. 3
RPM40WS/T Windscreens,Tan, Qty. 5 RPM40TC/T Dual Tie Clip, Tan, Qty. 3
RPM40WS/C Windscreens,Cocoa, Qty. 5 RPM40TC/W Dual Tie Clip, White, Qty. 3
RPM40WS/W Windscreens,White, Qty. 5 RPM40TC/M Single Tie Clip Mix Pack (1 of each color)
RPM40WS/M Windscreens (2 of each color), Qty. 8 RPM40VM/B Black Vampire Clip, Qty. 3
RPM40MWJ Rycote MiniWindjammer, Gray, Qty 2 RPM40VM/W White Vampire Clip, Qty. 3
Frequency Caps RPM40SM Clear Sticky Mount Qty. 3
RPM40FC/B Flat cap, Black, Qty. 10 RPM40MM/B Black Magnet Mount, Qty. 2
RPM40FC/C Flat cap, Cocoa, Qty. 10 RPM40MM/W White Magnet Mount, Qty. 2
RPM40FC/T Flat cap, Tan, Qty. 10 RPM40SVM/B Vampire Sticky Mount, Qty. 3
RPM40FC/W Flat cap, White, Qty. 10 RPM40TS Adhesives for Sticky Mount. Qty. 15
RPM40PC/B Presence cap, Black, Qty. 10 RPM40TS/50 Adhesives for Sticky Mount. Qty. 50
RPM40PC/C Presence cap, Cocoa, Qty. 10 RPM40SO/B Black Standoff for TL accessories, Qty. 10
RPM40PC/T Presence cap, Tan, Qty. 10 RPM40SO/C Cocoa Standoff for TL accessories, Qty. 10
RPM40PC/W Presence cap, White, Qty. 10 RPM40SO/T Tan Standoff for TL accessories, Qty. 10
-A Included Accessories Shown
RPM40SO/W White Standoff for TL accessories, Qty. 10
Other
RPM40PREMNT Preamplifier Mounting Kit
RPM40PRECLIP Beltclip for RPM400 Preamplifiers
RPM40KIT
RPM40CASE
Full Accessory Kit for TL Lavaliers
Storage Case for TL Lavalier
Polar Patterns
1000 Hz
Frequency Response
Loading...