SHURE QLXD14E/98H G51 (470-534 MHz), QLXD2/SM87A G51 (470-534 MHz), QLXD14E/85 G51 (470-534 MHz), QLXD14E/153T G51 (470-534 MHz), QLXD14E/93 G51 (470-534 MHz) QLX-D_brochures_en-US.pdf

QLX-D

QLX-D

Digital Wireless Systems

®

®

DIGITAL WIRELESS

QLX-D™ Digital Wireless Systems

SHURE PROFESSIONAL TECHNOLOGY
IN AN EASY-TO-USE SOLUTION

Transparent 24-bit digital audio.
Incredibly efficient wireless.
Powerful networking.
Rugged, secure systems.

Shure QLX-D™ Digital Wireless is the clear choice for exceptionally detailed

wireless audio in widely diverse and demanding environments. A highly

flexible system featuring streamlined setup and operation, QLX-D boasts

impressive RF efficiency to get more channels on air using less spectrum,

while the rugged all-metal construction withstands the rigors of constant use.

From corporate seminars to music clubs, classroom lectures to houses of

worship, Shure QLX-D Digital Wireless has it covered – delivering confident

performance, no matter what the venue.

SM86

System Components

QLXD1 Bodypack Transmitter
QLXD2 Handheld Transmitter

– Rugged metal construction
– Backlit LCD with easy to navigate

menu and controls

– 2 x AA batteries provide up to

9 hours of runtime

– Optional Shure SB900A lithium-ion

rechargeable battery provides up to
10 hours of runtime

– Displays remaining battery life

in hours and minutes when

Shure SB900A is used
– Switchable RF power (1,10mW)
– External charging contacts for

docked charging
– Multiple microphone cartridges available,

including the legendary SM58

®

(QLXD2)

QLXD4 Receiver

– Transparent, 24-bit digital audio
– 20 Hz – 20 kHz frequency range*
– 120 dB dynamic range
– No transmitter gain adjustment needed
– Up to 72 MHz overall tuning

bandwidth**

– 22 compatible channels per

8 MHz TV channel

– Up to 168 compatible channels per

frequency band**
– AES 256-bit encryption
– Ethernet networkable receivers
– Automatic channel scan quickly and

easily fi nds a new frequency
– Network Scan fi nds clean frequencies

for networked receivers
– IR Sync
– AMX/Crestron
– ShurePlus

compatible
– Wireless Workbench

software compatible
– Displays remaining battery life

in hours and minutes when

Shure SB900A is used
– Compatible with ULXD6 Boundary

Transmitter and ULXD8 Gooseneck

Transmitter

*Microphone dependent **Region dependent
Crestron® is a registered trademark of Crestron Electronics, Inc.

®

control system ready

™

Channels mobile app

®

control

Systems available with:

Handheld

Interchangeable SM, Beta, and KSM
microphone cartridges

SM58

®

Beta® 58A

SM86

KSM8

SM87A

KSM9

Beta® 87A

®

87C

Beta

Lavalier

Miniature and subminiature
lavalier condenser microphones

WL93 Miniature Lavalier

MX150 MicroFlex® Subminiature Lavalier

WL183/WL184/WL185

®

MicroFlex

Lavalier

Headset

Comfortable over-the-ear design

MX153B MicroFlex® Headset Microphone
MX153T MicroFlex

SM35 Headset Microphone

®

Headset Microphone

Instrument

Microphone and cable options for
instrument and line input

WA305 Premium Instrument Cable

WB98H/C Clip-On Instrument Microphone

QLX-D Digital Wireless Specifi cations (Note: All specifi c ations are subject to chang e.)

System

QLXD4 Receiver

RF Carrier Frequency Range 174 - 216 MHz, 470 - 865 MHz, 1492 - 1525 MHz, 1785 - 1805 MHz,

varies by region

Image Rejection >70 dB, typical

Latency <2.9 ms

RF Sensitivity -97 dBm at 10-5 BER

Working Range 100 m line-of-sight

Note: Actual range depends on RF signal absorption, refl ection and interference.

Audio Frequency Range 20 Hz to 20 kHz Note: Dependent on mi crophone type.

Audio Dynamic Range >120 dB, A-weighted, typical

(System Gain @ +10)

Total Harmonic Distortion <0.1%

(−12 dBFS input, System Gain @ +10)

Operating Temperature Range -18°C to 50°C Note: Battery characteristics may limit this range.

Dimensions 41 mm x 197 mm x 151 mm

Weight 777 g, without antennas

Housing Steel

Power Requirements 12 V DC @ 0.4 A, supplied by external power supply (tip positive)

Spurious Rejection > 80 dB, typical

Antenna Connector Type BNC

Antenna Impedance 50 Ω

Gain Adjustment Range -18 to +42 dB (in 1 dB steps)

Confi guration ¼" (6.35 mm): Impedance balanced (Tip = audio, Ring = no audio,

Sleeve = ground ) XLR: balanced (1= ground, 2 = audio +, 3 = audio −)

Antenna Impedance ¼" (6.35 mm): 100 Ω (50 Ω Unbalanced)

XLR: 100 Ω

Full Scale Output ¼" (6.35 mm): +12 dBV
XLR: LINE setting = +18 dBV, MIC setting = -12 dBV

Mic/Line Switch 30 dB pad

Network Interface Single Port Ethernet 10/100 Mbps

Network Addressing Capability DHCP or Manual IP address

QLXD1 Bodypack Transmitter
QLXD2 Handheld Transmitter

Dimensions QLXD1: 86 mm x 65 mm x 23 mm without antenna
QLXD2: 256 mm x 51 mm L x Dia. Note: Final dimensions depend on cartridge.

Weight QLXD1: 138 g, without bat teries
QLXD2: 3 47 g, without batteries Note: Final weight depends on cartridge.

Housing QLXD1: Cast aluminum

QLXD2: Machined aluminum

Battery Type Shure SB900A Rechargeable Li-Ion or AA bat teries 1.5 V

Battery Runtime (@ 10 mW) Shure SB900A rechargeable: up to 10 hours

alkaline: up to 9 hours

RF Output Power 1 mW or 10 mW

Occupied Bandwidth < 200 kHz

Modulation Type Shure proprietary digital

Mic Offset Range 0 to 21 dB (in 3 dB steps)

Europe, Middle East, Africa:

Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany

Phone: [phone]
Fax: [phone]
Email: [e-mail]
www.shure.eu

www.shure.eu

© 2017 Shure Incorporated

07/17

AL21270SE