Shure PSM 700 Specification Sheet

PSM 700 IN–EAR MONITOR SYSTEM

P7T WIRELESS TRANSMITTER

PA715 ANTENNA

P7R WIRELESS RECEIVER

SYSTEM FEATURES

The Shure PSM700 Wireless Personal Monitor System is a UHF frequency-agile, two-channel monitoring system designed for onstage applications. The PSM has several advantages over onstage loudspeaker monitors: it is less visible, has better sound, allows freedom of movement, and reduces

PSM700 In–Ear Monitor System

Specification Sheet

SCL3 EARPHONES

the chances of feedback. It is a versatile system, designed for use in many different sound reinforcement applications: public address, live music, theater, and electronic news gathering (ENG). The wireless system is frequency compatible with other Shure UHF and VHF wireless systems.

FEATURES

S UHF operation. S Stereo or MixModet control for custom monitor

mixes.

S 32 user-selectable frequencies per system. S Up to 16 compatible frequencies for 16 different

mixes.

S Frequency compatible with all Shure Wireless sys-

tems (country dependent).

S MPX Stereo audio transmission. S Switchable high-frequency boost on P7R. S +4 dBu/–10 dBV input level select switch on P7T. S Electronically balanced, combined 1/4-in./XLR con-

nectors on P7T can be used with balanced or unbalanced outputs.

SPECIFICATIONS

SYSTEM

RF Carrier Frequency Range

722 to 865 MHz (country dependent)

Operating Range

300 ft. (environment dependent)

Audio Frequency Response

50 to 15k Hz (+0, –3 dB re 1 kHz); earphone dependent

Image Rejection

80 dB typical

Spurious Rejection

80 dB typical

Total Harmonic Distortion (1 kHz)

0.8% typical (Ref. ±35 kHz deviation)

Modulation

FM ±35 kHz Deviation (Nominal), MPX Stereo

E2003, Shure Incorporated TL1038(CL)

S Volume and Balance dials on the P7R Receiver for

easy user access.

S Internal linear power supply on P7T, switchable

between 120 VAC and 230 VAC.

S Peak transmitter modulation limiter with fixed

threshold and modulation limit indicators.

S Loop out connectors on P7T for multiple mix set-

ups and easy installation.

S Tone-Key squelch. S Half-rack chassis on P7T complete with mounting

hardware.

S All metal construction on P7T and P7R S Headphone monitor on P7T for local listening. S Universal Earphones which seal off the ear canal

to reduce ambient sound levels.

Channel Separation: 35 dB typical Signal-to-Noise Ratio: 80 dB typical (A-weighted) Operating Temperature

–7° C to +49° C (+20° F to 120° F)

Battery Life: 4–6 hours, volume dependent Polarity

P7T audio inputs to P7R audio outputs: Non-inverting XLR: pin 2 positive with respect to pin 3

/4-in. TRS: Tip positive with respect to ring

P7T TRANSMITTER

RF Output Power

100 mW (+18.5 dBm) typical conducted (country dependent)

PSM700 IN–EAR MONITOR SYSTEM

Specification Sheet

Modulation Limiter

Internal peak limiter (>10:1 compression)

Antenna: External whip, 50 Ω BNC connector Power Requirements

P7T: 120 Vac, 50/60 Hz, 5 mm X 20 mm EP7T: 230 Vac, 50/60 Hz, 5 mm X 20 mm NOTE: This product is not disconnected from the mains power

supply when the power switch is in the OFF position.

Current

115 mAac maximum at 120 Vac 55 mAac maximum at 230 Vac

Fuse

P7T: 100–120 Vac, 160 mA/250 V (SLO-BLO

)

EP7T: 220–240 Vac, 80 mA/250 V time delay

FUSE

Dimensions

44.5 mm X 196.8 mm X 241.3 mm

/4 in. X 7 3/4 in. X 9 1/2 in.)

Net Weight

1.497 kg (3 lbs., 4.8 oz.)

P7R RECEIVER

RF Sensitivity

0.7 µV typical

Squelch Threshold

2 µV typical

Antenna Input Impedance

50 Ω typical

Antenna

External, threaded connector

Power

9 V battery (alkaline recommended), 4–6 hours (volume dependent)

Audio Output Connector

3.5 mm Stereo (Left = tip, Right = ring, Ground = sleeve)

Minimum Load Impedance: 16 Ω Net Weight: 0.23 kg (0.52 lbs.) Overall Dimensions

27.18 mm X 64.52 mm X 85.09 mm (1.070 in. X 2.540 in. X 3.350 in.)

CONNECTORS

P7T Audio Inputs (LEFT/CH.1 and RIGHT/CH.2)

Connector:

(XLR and 1/4-inch

combined)

Configuration: electronically

Actual

Impedance:

Nominal

Input Level:

Maximum

Input Level:

Assignments:

Phantom Power

Protection?

P7T L/R LOOP Outputs

Connector:

Configuration: electronically

Actual

Impedance:

Nominal

Output Level:

Maximum

Output Level:

Assignments:

Phantom Power

Protection?

XLR (female)

balanced

20 kΩ 20 kΩ

+4 dBu

(+4 input level)

–10 dBV

(–10 input level)

+25 dBu

(+4 input level)

+13 dBu

(–10 input level)

Pin 1 = ground

Pin 2 = hot

Pin 3 = cold

Yes

Up to 60 VDC

/4-inch

phone jack

(female)

electronically

balanced

+4 dBu

(+4 input level)

–10 dBV

(–10 input level)

+25 dBu

(+4 input level)

+13 dBu

(–10 input level)

Tip = hot

ring = cold

sleeve = ground

Up to 60 VDC

phone jack

(female)

balanced

+4 dBu

(+4 input level)

–10 dBV

(–10 input level)

+25 dBu

(+4 input level)

+13 dBu

(–10 input level)

Tip = hot

ring = cold

sleeve = ground

Up to 60 VDC

Yes

/4-inch

20 kΩ

Yes

Components

P7T Wireless Transmitter with rack-mounting hardware and detachable antenna

S Combined 1/4” and XLR Input Connectors S Stereo Input Meter and Input Level Control S Channel Select Control S Mono/Stereo/MixMode Source Switch S Earphone Connector and Volume Control S LOOP Out Connectors S Input Pad Switch

P7R Wireless Body-Pack Receiver with detachable antenna

S Balance Control S Low Battery Indicator

S Power LED S ON/OFF/Volume Control S RF LED S Channel Select Control

One Pair of SCL3 or SCL5 Earphones with foam and flex-tip ear inserts

S Low-mass, high-energy transducers S Universal fit S Choice of isolating sleeves; Custom molded

sleeves available for SCL3 model earphones

S Carrying pouch for convenient storage S Adjustment tube for securing the cables S Tool for removing wax buildup in the earphone