®
PSM® Personal Monitor Systems
PSM 300 | PSM 900 | PSM 1000
PSM
300 PERSONAL
MONITOR SYSTEM
The PSM®300 Stereo Personal Monitor System delivers detailed 24-bit digital audio
and reliable wireless freedom to every corner of the stage. Patented Audio Reference
Companding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable
wireless coverage extends over 300 ft (90 m) of range and eliminates dropouts. Easy to setup
and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a
clean wireless channel. Adjust the volume using MixMode® technology or stereo mode to create
a personal mix from two channels of audio.
System Features
• Send two channels of audio wirelessly to performers onstage
• 24-bit digital audio provides clear, detailed sound
• Patented Audio Reference Companding sounds more like wired
• Up to 90 dB signal-to-noise ratio
• Exceptionally wide stereo separation
• Solid analog RF connection over a 300 ft (90 m) range
®
• Create a personal mix from the bodypack with MixMode
• Frequency scan and IR sync quickly finds and assigns a clean channel
• Half-rack, single channel transmitter with included rack mount kit
• P3R bodypack systems available with SE112 Sound Isolating™ Earphones
• P3RA professional bodypack systems available with SE215 Sound Isolating™ Earphones
technology or stereo mode
PSM®300 System Specifications
RF Carrier Range 488–937.5 MHz
Compatible Frequencies
Per band
Tuning Bandwidth 24 MHz maximum
Operating Range
Environment dependent
Audio Frequency Response 38 Hz–15 kHz
Signal-to-Noise Ratio
A-weighted
Total Harmonic Distortion
ref. ±34 kHz deviation @1 kHz
Companding Patented Shure Audio Reference Companding
Spurious Rejection
ref. 12 dB SINAD
Frequency Stability ±2.5 ppm
MPX Pilot Tone 19 kHz (±1 Hz)
Modulation FM*, MPX Stereo
Operating Temperature -18 °C (0 °F) to +63 °C (145 °F)
(Varies by region, see frequency range and output power table)
up to 15
(Note: varies by region)
90 m (300 ft)
90 dB (typical)
<0.5% (typical)
>80 dB (typical)
(ref. ±34 kHz deviation @ 1 kHz)
NOTE:
This Radio equipment is intended for use in musical professional entertainment and similar applications.
This Radio apparatus may be capable of operating on some frequencies not authorized in your region.
Please contact your national authority to obtain information on authorized frequencies and RF power levels
for wireless microphone products.
Frequency Range
Band Range (MHz)
G20 488–512 30
H8E 518–542 10
H20 518–542 30
J10 584–608 30
J13 566–590 30
JB 806–810 10
K12 614–638 30
K3E 606–630 30
L18 630–654 10
L19 630–654 30
M16 686–710 30
M18 686–710 10
Q25 742–766 30
R12 794–806 10
S8 823–832 20
T11 863–865 10
X7 925–937.5 10
Transmitter
Output (mW)
Optional Accessories and Replacement Parts
Bodypack receiver P3R
Half-rack Transmitter P3T
Universal bodypack receiver P3RA
Antenna and power distribution system PA411
Wired PSM bodypack P9HW
Dynamic MicroDriver earphones SE112
Dynamic MicroDriver earphones SE215
High-definition MicroDriver earphones with tuned bass port SE315
High-definition earphones with dual MicroDrivers SE425
High-definition earphones with triple MicroDrivers SE535
High-definition earphones with quad MicroDrivers SE846
Carrying/Storage Bag 95A2313
1/4 wave antenna (774–952 MHz) UA400
1/4 wave antenna (470–752 MHz) UA400B
www.shure.com ©2016 Shure Incorporated
Component Specifications
P3T Wireless Transmitter
Overview
Dependable wireless transmission and 24-bit digital audio deliver a superior personal monitoring mix for every performance. Send 2 channels of audio to a
bodypack receiver up to 300 feet away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. The
rugged, half rack transmitter features easy front-panel controls including one-touch sync and input level knob to enable quick setup and easy operation.
Rear-panel balanced inputs and loop outputs provide versatile connectivity to audio sources and other P3T units.
• Single channel, half-rack transmitter with included rack mount kit
• Sends a stereo or mono mix wirelessly to performers onstage
• Rock-solid wireless connection to P3R receiver over 300 ft (90 m) range
• One-touch IR sync instantly links transmitter to receiver
• Up to 30 mW output power (region dependent)
• 24 MHz tuning range (region dependent)
• ¼" (6.3 mm) TRS balanced inputs and loop outputs
• High-contrast LCD menu with detailed L/R audio output meters
• Detachable antenna
• External power supply
• Selectable line/aux level
Product Specifications
RF Output Power 10, 20, 30 mW
RF Output Impedance 50 Ω (typical)
Net Weight 783 g (27.6oz.)
Dimensions 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.), H × W × D
Power Requirements 12–15 V DC, 260 mA maximum
Audio Input
Connector Type 6.35 mm (1/4") TRS
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kΩ (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 V DC
Audio Output
Connector Types 6.35 mm (1/4") TRS
Configuration Electronically balanced
Impedance Connected directly to inputs
Note: varies by region
-10 dBV: +12.2 dBu
P3T Front Panel
P3T Back Panel
www.shure.com ©2016 Shure Incorporated
Component Specifications
P3R Wireless Bodypack Receiver
Overview
The P3R is a wireless stereo bodypack receiver for use with the PSM®300 Personal Monitor System. With 24-bit digital audio clarity
and up to 300 ft of range (90 m), the P3R offers reliable wireless freedom that covers every corner of the stage. Simply connect
a set of earphones and adjust the controls to create a wireless personal mix. Patented Audio Reference Companding ensures the
clearest sound, with ultra-low noise and no artifacts. Use MixMode® technology to customize the mono blend from two channels of
audio, or select stereo mode and adjust the left/right balance as desired. One-touch frequency scan and automatic frequency selection enables quick setup and connection to a P3T transmitter via IR sync.
• Slim, lightweight, durable form factor
• Frequency scan and IR sync quickly finds and assigns a clean channel
• MixMode
• Stereo mode enables adjustment of left/right balance
• Easy to adjust volume knob and mix control
• 2 AA batteries provide up to 6 hours of continuous operation
• Power save mode preserves battery life when earphones are not connected
• Power and battery status LED
Specifications
Active RF Sensitivity
(at 20 dB SINAD)
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power
1 kHz @ <1% distortion, peak power, @32 Ω
Minimum Load Impedance 16 Ω
Headphone output 3.5 mm (1.8") stereo
Net Weight 98 g (3.5 oz.)
Dimension 110 × 64 × 21 mm H × W × D
Battery Life
(continuous use)
®
technology enables adjustment of two independent monitoring mix levels
2.2 μV
80 mW (per output)
(without batteries)
5–7 hours, AA batteries
P3R Wireless Bodypack Receiver
www.shure.com ©2016 Shure Incorporated
Component Specifications
P3RA Professional Wireless Bodypack Receiver
Overview
The P3RA is a wireless stereo bodypack receiver for use with the PSM®300 Personal Monitor System.
With detailed 24-bit digital audio and reliable wireless performance, the P3RA bodypack delivers professional personal monitoring to
any corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.
Find a wireless channel easily, using the scan function to automatically select the cleanest frequency available from a wide tuning
bandwidth. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.
EQ and volume limiting further individualize the sound via the high-contrast LCD menu. With a compact and rugged aluminum body,
the P3RA ensures a long lifetime of use and easily clips onto a belt or guitar strap. Two standard AA batteries provide up to 6 hours
of continuous use. The optional SB900A rechargeable battery (sold separately) extends runtime and allows easy in-unit charging.
• Rugged, all-metal construction
• High-contrast LCD screen with menu-based navigation
• 2-band shelving EQ with high and low boost
• Volume limiter sets the maximum gain level range for the volume knob
• MixMode® technology enables adjustment of two independent monitoring mix levels
• Stereo mode enables adjustment of left/right balance
• Frequency scan and IR sync quickly finds and assigns a clean channel
• 2 AA batteries provide up to 6 hours of continuous use
• Optional Shure SB900A lithium-ion rechargeable battery provides extended runtime
• Power and battery status LED
• 5-segment battery life meter
• Power save mode preserves battery life when earphones are not connected
Specifications
Active RF Sensitivity
(at 20 dB SINAD)
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power
1 kHz @ <1% distortion, peak power, @32 Ω
Minimum Load Impedance 16 Ω
Headphone output 3.5 mm (1.8") stereo
Net Weight 196 g (6.9 oz.)
Dimensions 99 × 66 × 23 mm (H × W × D)
Battery Life
(continuous use)
2.2 μV
80 mW (per output)
(with batteries)
4–5.5 hours, AA batteries
5.5–7 hours, SB900A battery
P3RA Professional Bodypack
Receiver
Rechargeable Power Management (sold separately)
SB900A Rechargeable Battery
PSM 300 receivers are compatible with the SB900A lithium-ion rechargeable
battery, which provides up to 7 hours of continuous use and precise tracking of
remaining life and charge cycle details.
SBC200 Dual Docking Recharging Station
This compact and portable unit charges batteries while in transmitters or out.
Up to 4 SBC200’s can be chained together to run off one power supply.
SBC800 Eight Battery Recharging Station
This compact and portable unit charges up to 8 SB900A batteries to full capac-
ity within 3 hours, with status LEDs to indicate power levels. SB900A batteries
fit securely in the charger for easy, efficient storage and transport.
www.shure.com ©2016 Shure Incorporated
Loading...