Page 1
Microflex Microphones
MICROFLEX MICROPHONES
THERE‘S NEVER BEEN A MORE FLEXIBLE CHOICE.
Work a room in more ways than ever with Shure Microflex
microphones. Combining sleek, low profile aesthetics and a complete
selection of microphones and mounting options, the Microflex line
offers the highest standard of quality and efficiency for installed audio
applications.
Microflex Gooseneck Microphones
– 12 cm (5”), 25 cm (10”), 30 cm (12”), 38 cm, (15”) and 45 cm (18”) models fit a wide variety
of applications from the podium to the conference table
– Interchangeable condenser cartridges with superior audio quality
Microflex Boundary Microphones
– Multi-element, low-profile, or wireless microphone styles available
– Extremely versatile range of placement options for easy configuration and installation
Microflex Overhead Microphones
– Compact and adjustable 10 cm (4”) gooseneck
– Interchangeable condenser cartridges for accurate sound reproduction in any setting
APPLICATIONS
Conference Rooms
Seminars
Houses of Worship
Theaters
Lecterns
PRODUCT HIGHLIGHTS
Wide selection for
customized installations
Wired or wireless
models available
Superior audio quality
CommShield™
Technology for
improved RF resistance
Sleek, low-profile
designs
Microflex Lavalier and Earset Microphones
– For applications requiring low-profile descreet placement
– Use in wired or wireless applications
Page 2
MX405, MX410 and MX415 Miniature Gooseneck Microphones
Flexible in more ways than one, Microflex Miniature Gooseneck Microphones deliver unsurpassed style and performance for conference rooms and
similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit
for your application. Fully compatible with SLX® Wireless Systems, Microflex Wireless Systems and ULX-D Systems.
Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Polar Pattern MX405/C, MX410/C, MX415/C: Cardioid
Output Impedance EIA rated at 150 Ω (170 Ω actual)
Output Configuration Active balanced
Sensitivity at 1 kHz, open circuit voltage;
1 Pascal = 94 dB SPL
Maximum SPL 1 kHz at 1% THD, 1 kΩ load Cardioid: 121 dB
Equivalent Output Noise A-weighted Cardioid: 28 dB SPL
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Dynamic Range 1 kΩ load at 1 kHz 93 dB
Common Mode Rejection 10 Hz to 100 kHz 45 dB minimum
Preamplifier Output Clipping Level 1% THD –8 dBV (0.4 V)
Polarity 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2
Weight MX405: 54 g
Logic Connections LED IN: Active low (≤1.0 V), TTL compatible. Absolute maximum voltage: –0.7 V to 50 V.
Mute Switch Attenuation –50 dB minimum
Cable MX400DP: 6 m attached cable with shielded audio pair terminated at a 3-pin male XLR
Environmental Conditions Operating temperature: –18 – 57 °C
Power Requirements 48 – 52 Vdc phantom, 8.0 mA
MX405/S, MX410/S, MX415/S: Supercardioid
Cardioid: –35 dBV/Pa (18 mV)
Supercardioid: –34 dBV/Pa (21 mV)
Supercardioid: 120 dB
Supercardioid: 27 dB SPL
Cardioid: 66 dB
Supercardioid: 67 dB
relative to pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4
relative to pin 2 of output XLR connector.
MX410: 68 g
MX415: 70 g
MX400DP: 516 g
MX400SMP (w/ Kit): 125 g
LOGIC OUT: Active low (≤1.0 V), sinks up to 20 mA, TTL compatible. Absolute maximum
voltage: –0.7 V to 50 V (up to 50 V through 3 kΩ).
and three unterminated conductors for logic control
Storage temperature: –29 – 74 °C
Relative humidity: 0 – 95%
*for detailed dimensions please
reference MX405/410/415
user guide
MX415, MX410 and
MX405
Miniature goosenecks
MX415DF and
MX410DF
Miniature goosenecks
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
MX405/C, MX405/S 127 mm (5 inch) gooseneck, bi-color status indicator, includes surface mount preamp
MX405R/N 127 mm (5 inch) gooseneck, light ring, includes surface mount preamp
MX410/C, MX410/S 254 mm (10 inch) gooseneck, bi-color status indicator, includes surface mount preamp
MX410R/N 254 mm (10 inch) gooseneck, light ring, includes surface mount preamp
MX415/C, MX415/S 381 mm (15 inch) gooseneck, bi-color status indicator, includes surface mount preamp
MX415R/N 381 mm (15 inch) gooseneck, light ring, includes surface mount preamp
MX405LP/C, MX405LP/S 127 mm (5 inch) gooseneck, bi-color status indicator, less preamp
MX405RLP/N 127 mm (5 inch) gooseneck, light ring, less preamp
MX410LP/C, MX410LP/S 254 mm (10 inch) gooseneck, cardioid, bi-color status indicator, less preamp
MX410RLP/N 254 mm (10 inch) gooseneck, light ring, less preamp
MX410LPDF/C, MX410LPDF/S 254 mm (10 inch) gooseneck, bi-color status indicator, less preamp, dualflex
MX410RLPDF/C, MX410RLPDF/S 254 mm (10 inch) gooseneck, light ring, less preamp, dualflex
MX410RLPDF/N 254 mm (10 inch) gooseneck, light ring, less preamp, dualflex
MX415LP/C, MX415LP/S 381 mm (15 inch) gooseneck, cardioid, bi-color status indicator, less preamp
MX415RLP/N 381 mm (15 inch) gooseneck, light ring, less preamp
MX415LPDF/C, MX415LPDF/S 381 mm (15 inch) gooseneck, bi-color status indicator, less preamp, dualflex
MX415RLPDF/C, MX415RLPDF/S 381 mm (15 inch) gooseneck, light ring, less preamp, dualflex
MX415RLPDF/N 381 mm (15 inch) gooseneck, light ring, less preamp, dualflex
www.shure.de
MX400SMP
Surface mount preamp
MX400DP
Wired desktop base (also available as MX890
wireless desktop base)
Page 3
MX405, MX410 and MX415 Miniature Gooseneck Microphones
Optional Accessories and Replacement Parts
MX400SMP Surface mount preamp R185B Black cardioid cartridge for all
MX400DP Wired desktop base. Includes
MX890 Wireless desktop base, compat-
6.1 m attached cable
ible with SLX Wireless Systems
Microflex models
R184B Black supercardioid cartridge for all
Microflex models
R183B Black Omnidirectional cartridge for
all Microflex models
Furnished Accessories
Models with included Preamp All Models
MX400SMP Surface mount preamp RK513WS Snap-fit foam windscreen (4 pcs.)
65A405 Rubber isolation rings
65A2190 Wing nut
95A2529 5-pin XLR-F
65A2166 Cap
A412MWS Metal locking windscreen
95A2487 Tapered windscreen
Supercardioid
9876543298765432
Hz
+20
+10
0
dB
ñ10
-20
20 2000010001000050 100
Cardioid
Hz
9876543298765432
+20
+10
0
dB
ñ10
-20
20 2000010001000050 100
Architectural Specifications
MX405/C – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with cardioid polar pattern, black finish, and logic controlled bi-color
status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX405/S – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with supercardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX405R/N – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX410/C – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with cardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX410/S – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with supercardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX410R/N – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
www.shure.de
Page 4
MX405, MX410 and MX415 Miniature Gooseneck Microphones
MX415/C – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”)
with cardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone
shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to
17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX415/S – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”)
with supercardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to
RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz
to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX415R/N – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”)
with no included cartridge, black finish, and logic controlled, upper red light ring status indicator.
The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The microphone shall offer
the option to interchange cartridges with diverse polar pattern.
MX405LP/C – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”)
with cardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone
shall be compatible with the MX400SMP or MX890. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz
and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to interchange cartridges
with diverse polar pattern.
MX405LP/S – The microphone shall be an electret condenser 127 mm gooseneck microphone
(5”) with supercardioid polar pattern, black finish, and logic controlled bi-colorstatus indicator. The
microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency response
shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option
to interchange cartridges with diverse polar pattern.
MX405RLP/N – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”)
with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The
microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be
resistant to RF interference from portable mobile and handheld devices.
MX410LP/C – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”)
with cardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone
shall be compatible with the MX400SMP or MX890. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz
and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to interchange cartridges
with diverse polar pattern.
MX410LP/S – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with supercardioid polar pattern, black finish, and logic controlled bi-color status indicator. The
microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency response
shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option
to interchange cartridges with diverse polar pattern.
MX410RLP/N – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX415LP/C – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”)
with cardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone
shall be compatible with the MX400SMP or MX890. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz
and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to interchange cartridges
with diverse polar pattern.
MX415LP/S – The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with supercardioid polar pattern, black finish, and logic controlled bi-color status indicator. The
microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency response
shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option
to interchange cartridges with diverse polar pattern.
MX415RLP/N – The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX410LPDF/C – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with cardioid polar pattern, two bendable sections, black finish, and logic controlled bi-color status indicator. The microphone shall be compatible with the MX400SMP or MX890. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer
the option to interchange cartridges with diverse polar pattern.
MX410LPDF/S – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with supercardioid polar pattern, two bendable sections, black finish, and logic con trolled
bi-color status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or
MX890. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX410RLPDF/C – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with cardioid polar pattern, two bendable sections, black finish, and logic controlled upper red
light ring status indicator. The microphone shall be compatible with the MX400SMP or MX890. The
microphone shall be resistant to RF interference from portable mobile and handheld devices. The
frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX410RLPDF/S – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with supercardioid polar pattern, two bendable sections, black finish, and logic controlled
upper red light ring status indicator. The microphone shall be compatible with the MX400SMP,
MX400DP or MX890. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21
mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX410RLPDF/N – The microphone shall be an electret condenser 254 mm gooseneck microphone
(10”) with no included cartridge, two bendable sections, black finish, and logic controlled, upper red
light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or
MX890. The microphone shall be resistant to RF inter ference from portable mobile and handheld
devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX415LPDF/C – The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with cardioid polar pattern, two bendable sections, black finish, and logic controlled bi-color status indicator. The microphone shall be compatible with the MX400SMP or MX890. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer
the option to interchange cartridges with diverse polar pattern.
MX415LPDF/S – The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with supercardioid polar pattern, two bendable sections, black finish, and logic con trolled
bi-color status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or
MX890. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX415RLPDF/C – The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with cardioid polar pattern, two bendable sections, black finish, and logic controlled upper red
light ring status indicator. The microphone shall be compatible with the MX400SMP or MX890. The
microphone shall be resistant to RF interference from portable mobile and handheld devices. The
frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX415RLPDF/S - The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with supercardioid polar pattern, two bendable sections, black finish, and logic con trolled upper
red light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP
or MX890. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX415RLPDF/N – The microphone shall be an electret condenser 381 mm gooseneck microphone
(15”) with no included cartridge, two bendable sections, black finish, and logic controlled, upper red
light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or
MX890. The microphone shall be resistant to RF inter ference from portable mobile and handheld
devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
www.shure.de
Page 5
MX412 and MX418 Standard Gooseneck Microphones
Microflex Standard Gooseneck Microphones provide the added length and flexibility needed for speakers in environments like lecterns, pulpits, and
courtrooms. Available in four models with a variety of lenghts and mounting styles to choose from, Microflex Gooseneck microphones feature high
sensitivity and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.
Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Polar Pattern MX412/C, MX418/C: Cardioid
Output Impedance EIA rated at 150 Ω (170 Ω actual)
Sensitivity
at 1 kHz, open circuit voltage;
1 Pascal = 94 dB SPL
Maximum SPL
1 kHz at 1% THD, 1 kΩ load
Equivalent Output Noise
A-weighted
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Dynamic Range
1 kΩ load at 1 kHz
Common Mode Rejection 45 dB minimum (10 Hz – 100 kHz)
Preamplifier Output Clipping Level
1% THD
Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2
Mute Switch Attenuation –50 dB minimum
Cable MX412D and MX418D: The 3 m attached custom cable contains a shielded
Environmental Conditions Operating temperature range: -18° – 57° C
Power Requirements 11 – 52 Vdc phantom, 8.0 mA
MX412/S, MX418/S: Supercardioid
Omnidirectional cartridge available separately
Cardioid: –35 dBV/Pa (17.8 mV)
Supercardioid: –33.5 dBV/Pa (21.1 mV)
Omnidirectional: –27.5 (42.2 mV)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
Cardioid: 28 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Cardioid: 66 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
96.2 dB
100 dB at 0 gain (internal modification)
–6 dBV (0.5 V)
relative to pin 3 of output XLR connector.
audio pair and three unshielded conductors for logic control.
Overall diameter = 4 mm
Relative humidity: 0 – 95%
*for detailed dimensions
please reference MX412/418
user guides
MX418
Gooseneck with
attached preamp
and shockmount
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
MX412/C, MX412/S, MX412/N 305 mm (12 inch) gooseneck, attached XLR preamp, shock mount, flange mount,
MX418/C, MX418/S, MX418/N 457 mm (18 inch) gooseneck, attached XLR preamp, shock mount, flange mount,
MX412S/C, MX412S/S, MX412S/N 305 mm (12 inch) gooseneck, attached XLR preamp, Shock Mount, flange mount,
MX418S/C, MX418S/S, MX418S/N 457 mm (18 inch) gooseneck, attached XLR preamp, shock mount, flange mount,
MX412SE/C, MX412SE/S,
MX412SE/N
MX418SE/C, MX418SE/S,
MX418SE/N
MX412D/C, MX412D/S, MX412D/N 305 mm (12 inch) gooseneck, desktop base with 3 m cable, logic functions,
MX418D/C, MX418D/S, MX418D/N 457 mm (18 inch) gooseneck, desktop base with 3 m cable, logic functions,
snap-fit foam windsreen
snap-fit foam windsreen
snap-fit foam wndscreen, mute switch, LED Indicator
snap-fit foam windscreen, mute switch, LED indicator
305 mm (12 inch) gooseneck, in-line preamp, shock mount, flange mount,
3 m side-exit (or bottom-exit) cable, snap-fit foam windscreen
457 mm (18 inch) gooseneck, in-line preamp, shock mount, flange mount,
3 m side-exit (or bottom-exit) cable, snap-fit foam windscreen
programmable switch and LED indicator, snap-fit foam windscreen
programmable switch and LED indicator, snap-fit foam windscreen
MX418SE
Gooseneck with
in-line preamp and
side exit cable
MX412D
Gooseneck with
attached desktop
base
www.shure.de
Page 6
MX412 and MX418 Standard Gooseneck Microphones
Furnished Accessories
MX412, MX418, MX412S, MX418S Models MX412SE, MX418SE Models MX412D, MX418D Models
65B8264 Flange A12C Flange and nut RK412WS Snap-fit foam windscreen (1 furnished,
65B8265 Retainer 80A476 Clamp
80A439 Isolation ring A400SM Shock mount
RK412WS Snap-fit foam windscreen (1 furnished,
4 in replacement pack)
RK412WS Snap-fit foam windscreen (1 furnished, 4 in replacement
pack)
A400SM Shock mount 31B1762A Shock mount adapter
80A67 Hex wrench #4
Optional Accessories and Replacement Parts
A99WS Foam ball windscreen R183B Black omnidirectional cartridge
RK100PK Replacement in-line
C130 Custom logic cable
preamplifier (SE models)
(specify length)
for all Microflex models
R184B Black supercardioid cartridge for
all Microflex models
R185B Black cardioid cartridge for all
Microflex models
A412MWS Metal locking windscreen
A412B Desktop base
A57F Stand adapter
4 in replacement pack)
+20
+10
0
dB
ñ10
-20
20 2000010001000050 100
Cardioid
+20
+10
0
dB
ñ10
9876543298765432
Hz
-20
20 2000010001000050 100
Omnidirectional
9876543298765432
Hz
+20
+10
0
dB
ñ10
-20
20 2000010001000050 100
Supercardioid
9876543298765432
Hz
www.shure.de
Page 7
MX412 and MX418 Standard Gooseneck Microphones
Architectural Specifications
MX412/C – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with cardioid polar pattern, interchangeable cartridges integrated XLR preamp, and black
finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/
Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412/S – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with supercardioid polar pattern, integrated XLR preamp, and black finish. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX412/N – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with no included cartridge, integrated XLR preamp, and black finish. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX418/C – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with cardioid polar pattern, integrated XLR preamp, and black finish. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX418/S – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with supercardioid polar pattern, integrated XLR preamp, and black finish. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX418/N – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with no included cartridge, integrated XLR preamp, and black finish. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX412S/C – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with cardioid polar pattern, integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/
Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412S/S – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with supercardioid polar pattern, integrated XLR preamp, black finish, mute switch, and
LED indicator. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 21. 1 mV/P a. The microphone shall offer the option to interchange cartridges with diverse polar
pattern.
MX412S/N – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX418S/C – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with cardioid polar pattern, integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/
Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418S/S – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with supercardioid polar pattern, integrated XLR preamp, black finish, mute switch, and
LED indicator. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 21. 1 mV/P a. The microphone shall offer the option to interchange cartridges with diverse polar
pattern.
MX418S/N – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX412SE/C – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with cardioid polar pattern, black finish, and 3 m side-exit (or bottom-exit) cable that terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the included
in-line preamp. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 17. 8 mV/P a. The microphone shall offer the option to interchange cartridges with diverse polar
pattern.
MX412SE/S – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with supercardioid polar pattern, black finish, and 3 m side-exit (or bottom-exit) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the
included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 21. 1 mV/P a. The microphone shall offer the option to interchange cartridges with diverse
polar pattern.
MX412SE/N – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with no included cartridge, black finish, and 3 m side-exit (or bottom-exit) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the
included in-line preamp. The microphone shall be resistant to RF interference from portable
mobile and h andhel d devi ces. The microphone shall offer the option to interchange cartridges with
diverse polar pattern.
MX418SE/C – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with cardioid polar pattern, black finish, and 10” (3m) side-exit (or bottom-exit)) cable
that terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to
the included in-line preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the
sensit ivity shall be 17. 8 mV/P a. The microphone shall offer the option to interchange cartridges with
diverse polar pattern.
MX418SE/S – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with supercardioid polar pattern, black finish, and 10” (3m) side-exit (or bottom-exit) cable
that terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to
the included in-line preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the
sensit ivity shall be 21. 1mV/Pa . The microphone shall offer the option to interchange cartridges with
diverse polar pattern.
MX418SE/N – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with no included cartridge, black finish, and 10” (3m) side-exit (or bottom-exit) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the
included in-line preamp. The microphone shall be resistant to RF interference from portable
mobile and h andhel d devi ces. The microphone shall offer the option to interchange cartridges with
diverse polar pattern.
MX412D/C – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with cardioid polar pattern and black finish. The microphone shall be mounted on a
desktop base with a logic controlled programmable switch and LED indicator. The microphone
shall include an attached 3 m cable. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and
the se nsitiv ity sh all be 17.8 mV/Pa. The microphone shall offer the option to interchange cartridges
with diverse polar pattern.
MX412D/S – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with supercardioid polar pattern and black finish. The microphone shall be mounted on a
desktop base with a logic controlled programmable switch and LED indicator. The microphone
shall include an attached 3 m cable. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and
the se nsitiv ity sh all be 21.1 mV/Pa. The microphone shall offer the option to interchange cartridges
with diverse polar pattern.
MX412D/N – The microphone shall be an electret condenser 305 mm gooseneck microphone
(12”) with no included cartridge and black finish. The microphone shall be mounted on a
desktop base with a logic controlled programmable switch and LED indicator. The microphone
shall include an attached 3 m cable. The microphone shall be resistant to RF interference
from p ortabl e mobi le and handh eld de vices. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX418D/C – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with cardioid polar pattern and black finish. The microphone shall be mounted on a
desktop base with a logic controlled programmable switch and LED indicator. The microphone
shall include an attached 3 m cable. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz
and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX418D/S – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with supercardioid polar pattern and black finish. The microphone shall be mounted on a
desktop base with a logic controlled programmable switch and LED indicator. The microphone
shall include an attached 3 m cable. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz
and the sensitivity shall be 21.1mV/Pa. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX418D/N – The microphone shall be an electret condenser 457 mm gooseneck microphone
(18”) with no included cartridge and black finish. The microphone shall be mounted on a
desktop base with a logic controlled programmable switch and LED indicator. The microphone
shall include an attached 3 m cable. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
www.shure.de
Page 8
MX396 Multi-Element Boundary Microphones
Microfl ex Multi-Element Boundary Microphones deliver a unique and versatile tool for conference room installations. Clean and simple in appearance,
Multi-Element Boundary mics come in two or three element confi gurations, combining the coverage of multiple microphones into one small, compact package.
Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Output Impedance EIA rated at 150 Ω (170 Ω actual)
Output Confi guration Active balanced
Sensitivity
at 1 kHz, open circuit voltage;
1 Pa = 94 dB SPL
Maximum SPL
1 kHz at 1% THD, 1 kΩ load
Equivalent Output Noise A-weighted 28 dB SPL
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Dynamic Range
1 kΩ load at 1 kHz
Common Mode Rejection
10 Hz to 100 kHz
Preamplifi er Output Clipping Level
1% THD
Weight Net: 587 g
Logic Connections LED IN: Active low (≤1.0 V), sinks up to 20 mA, TTL compatible.
Mute Switch Attenuation -50 dB minimum
Cable 6 m attached unterminated cable with three shielded audio pairs and
Environmental Conditions Operating temperature : –18 – 57 °C
Power Requirements MX396/C-DUAL: 48 – 52 Vdc phantom, 10.0 mA
–35 dBV/Pa (18 mV)
122 dB
66 dB
94 dB
45 dB minimum
–6 dBV (0.5 V)
Packaged: 816 g
Absolute maximum voltage: –0.7 V to 50 V (up to 50 V through 3 kΩ).
LOGIC OUT : Active low (≤1.0V), sinks up to 20 mA, TTL compatible.
Absolute maximum voltage: –0.7 V to 50 V (up to 50 V through 3 kΩ).
three shielded conductors for l ogic control.
Storage temperature : –29 – 74 °C
Relative humidity : 0 – 95%
MX396/C-TRI: 48 – 52 Vdc phantom, 12.0 mA
MX396 Multi-Element boundary microphone
Available Models
MX396/C-DUAL Dual-Element 0-180 degrees, back or bottom exit cable, mute output, LED input
MX396/C-TRI Tri-Element 90-0-90 mic, adjustable to 120-120-120 degrees, back or bottom exit cable,
mute output, LED input
Furnished Accessories and Replacement Parts
65A2190 Fastening wingnut R185B Cardioid replacement cartridge (x 1)
31A2165 Fastening tube 65A405 Rubber isolation rings
Architectural Specifications
MX396/C-Dual – The microphone shall be a surface mounted, black electret condenser microphone with two cardioid polar pattern elements, each with individual channel output. The microphone shall include a logic enabled, bi-color status indicator and
programmable mute switch. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency range shall be 50 Hz to 17 kHz and the sensitivity of each individual element, 18 mV/Pa.
MX396/C-Tri – The microphone shall be a surface mounted, black electret condenser microphone with three cardioid polar pattern elements, each with individual channel output. The microphone shall include a logic enabled, bi-color status indicator and
programmable mute switch. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency range shall be 50 Hz to 17 kHz and the sensitivity of each individual element, 18 mV/Pa.
www.shure.de
Page 9
MX395 Low Profile Boundary Microphones
The Microflex Low Profile Boundary Microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms,
these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors and pickup patterns for customized
table and ceiling installations.
Specifications
Type Condenser (electret bias)
Frequency Response 50 HZ – 17 kHz
Polar Pattern MX395/O: Omnidirectional
Output Impedance EIA rated at 150 Ω (170 Ω actual)
Output Configuration Active balanced
Sensitivity
at 1 kHz , open circuit voltage;
1 Pascal = 94 dB SPL
Maximum SPL
1 kHz at 1% THD, 1 kΩ load
Equivalent Output Noise
A-weighted
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Dynamic Range
1 kΩ load at 1 kHz
Common Mode Rejection 45 dB minimum 10 Hz to 100 kHz
Preamplifier Output Clipping Level
1% THD
Polarity 3-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to
Weight Net: 136 g; Packaged: 374 g
Logic Connections LED IN: Active low (≤ 1.0 V), TTL compatible. Absolute maximum voltage: –0.7 V to 50 V.
Environmental Conditions Operating temperature: –18 – 57 °C
Power Requirements MX395: 11 – 52 Vdc phantom, 2.0 mA
MX395/C: Cardioid
MX395/BI: Bidirectional
Cardioid: –35 dBV/Pa (18 mV)
Omnidirectional: –28 dBV/Pa (42 mV)
Bidirectional: –37 dBV/Pa (14 mV)
Cardioid: 121 dB
Omnidirectional: 114 dB
Bidirectional: 123 dB
Cardioid: 28 dB SPL
Omnidirectional: 21 dB SPL
Bidirectional: 29 dB
Cardioid: 66 dB
Omnidirectional: 73 dB
Bidirectional: 65 dB
Cardioid: 93 dB
Omnidirectional: 93 dB
Bidirectional: 94 dB
–8 dBV (0.4 V)
pin 3 of output XLR connector.
5-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to
pin 2 of output XLR connector.
Storage temperature: –29 – 74 °C
Relative humidity: 0 – 95%
MX395-LED: 48 – 52 Vdc phantom, 8.0 mA
MX395
Low Profile
Boundary Mic
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, O = Omnidirectional, BI = Bidirectional
MX395B/C, MX395B/BI, MX395B/O Black, 3-pin XLR
MX395AL/C, MX395AL/BI, MX395AL/O Aluminum, 3-pin XLR
MX395W/C, MX395W/BI, MX395W/O White, 3-pin XLR
MX395B/C-LED, MX395B/BI-LED, MX395B/O-LED Black, 5-pin XLR, LED, bi-color status indicator
MX395AL/C-LED, MX395AL/BI-LED, MX395AL/O-LED Aluminum, 5-pin XLR, LED, bi-color status indicator
MX395W/C-LED, MX395W/BI-LED, MX395W/O-LED White, 5-pin XLR, LED, bi-color status indicator
www.shure.de
Page 10
MX395 Low Profile Boundary Microphones
Furnished Accessories
65A405 Rubber isolation rings
95A1118 (LED Models only) 5-pin XLR-female connector
65A2190 Wing nut
Architectural Specifications
MX395AL/C – The microphone shall be a surface mounted,
aluminum finish, electret condenser microphone with low-cut
switch and cardioid polar pattern. The visible diameter and
height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17 kHz and the
sensitivity 18 mV/Pa.
MX395AL/C-LED - The microphone shall be a surface mounted,
aluminum, electret condenser microphone with low-cut switch
and cardioid polar pattern. The microphone shall include a
logic controlled, bi-color status indicator. The visible diameter
and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17 kHz and
the sensitivity 18 mV/Pa.
MX395B/C – The microphone shall be a surface mounted,
black, electret condenser microphone with low-cut switch and
cardioid polar pattern. The visible diameter and height of the
microphone above the mounting surface shall be 32 mm and
24 mm. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency
response range shall be 50 Hz to 17 kHz and the sensitivity
18 mV/Pa.
MX395B/C-LED – The microphone shall be a surface mounted,
black, electret condenser microphone with low-cut switch and
cardioid polar pattern. The microphone shall include a logic
controlled, bi-color status indicator. The visible diameter and
height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17 kHz and the
sensitivity 18 mV/Pa.
MX395W/C - The microphone shall be a surface mounted,
white, electret condenser microphone with low-cut switch and
cardioid polar pattern. The visible diameter and height of the
microphone above the mounting surface shall be 32 mm and
24 mm. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency
response range shall be 50 Hz to 17 kHz and the sensitivity
18 mV/Pa.
MX395W/C-LED - The microphone shall be a surface mounted,
white, electret condenser microphone with low-cut switch and
cardioid polar pattern. The microphone shall include a logic
controlled, bi-color status indicator. The visible diameter and
height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17 kHz and the
sensitivity 18 mV/Pa.
MX395AL/O – The microphone shall be a surface mounted,
aluminum finish, electret condenser microphone with low-cut
switch and omnidirectional polar pattern. The visible diameter
and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 42 mV/Pa.
MX395AL/O-LED - The microphone shall be a surface mounted, aluminum, electret condenser microphone with low-cut
switch and omnidirectional polar pattern. The microphone shall
include a logic controlled, bi-color status indicator. The visible
diameter and height of the microphone above the mounting
surface shall be 32 mm and 24 mm. The microphone shall be
resistant to RF interference from portable mobile and handheld
devices. The frequency response range shall be 50 Hz to
17kHz and the sensitivity 42 mV/Pa.
MX395B/O – The microphone shall be a surface mounted,
black, electret condenser microphone with low-cut switch
and omnidirectional polar pattern. The visible diameter and
height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17kHz and the
sensitivity 42 mV/Pa.
MX395B/O-LED – The microphone shall be a surface mounted,
black, electret condenser microphone with low-cut switch and
omnidirectional polar pattern. The microphone shall include a
logic controlled, bi-color status indicator. The visible diameter
and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17 kHz and
the sensitivity 42 mV/Pa.
MX395W/O – The microphone shall be a surface mounted,
white, electret condenser microphone with low-cut switch
and omnidirectional polar pattern. The visible diameter and
height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17kHz and the
sensitivity 42 mV/Pa.
MX395W/O-LED - The microphone shall be a surface mounted,
white, electret condenser microphone with low-cut switch and
omnidirectional polar pattern. The microphone shall include a
logic controlled, bi-color status indicator. The visible diameter
and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17 kHz and
the sensitivity 42 mV/Pa.
MX395AL/BI – The microphone shall be a surface mounted,
aluminum finish, electret condenser microphone with low-cut
switch and bi-directional polar pattern. The visible diameter and
height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17kHz and the
sensitivity 14 mV/Pa.
MX395AL/BI-LED - The microphone shall be a surface
mounted, aluminum, electret condenser microphone with
low-cut switch and bi-directional polar pattern. The microphone
shall include a logic controlled, bi-color status indicator. The visible diameter and height of the microphone above the mounting
surface shall be 32 mm and 24 mm. The microphone shall be
resistant to RF interference from portable mobile and handheld
devices. The frequency response range shall be 50 Hz to
17kHz and the sensitivity 14 mV/Pa.
MX395B/BI – The microphone shall be a surface mounted,
black, electret condenser microphone with low-cut switch and
bi-directional polar pattern. The visible diameter and height
of the microphone above the mounting surface shall be 32
mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17 kHz and the
sensitivity 14 mV/Pa.
MX395B/BI-LED – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch
and bi-directional polar pattern. The microphone shall include
a logic controlled, bi-color status indicator. The visible diameter
and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17kHz and
the sensitivity 14 mV/Pa.
MX395W/BI - The microphone shall be a surface mounted,
white, electret condenser microphone with low-cut switch and
bi-directional polar pattern. The visible diameter and height
of the microphone above the mounting surface shall be 32
mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17kHz and the
sensitivity 14 mV/Pa.
MX395W/BI-LED – The microphone shall be a surface mounted, white, electret condenser microphone with low-cut switch
and bi-directional polar pattern. The microphone shall include
a logic controlled, bi-color status indicator. The visible diameter
and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17kHz and
the sensitivity 14 mV/Pa.
Cardioid
Bidirectional
Omnidirectional
www.shure.de
Page 11
MX690 Wireless Boundary and MX890 Wireless Desktop Base
The Microflex Wireless Boundary Microphone as well as the Wireless Desktop Base offer total freedom of placement with no holes to drill or cables to
run for installation. They are the perfect solution for conference and meeting spaces where users demand flexibility and high performance. Compatible
with Shure SLX Wireless Systems, including the SLX4L receiver with logic signal output for applications requiring logic functionality.
Specifications
MX690 Microphone Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Polar Pattern Cardioid
Sensitivity
at 1 kHz, open circuit voltage;
1 Pascal = 94 dB SPL
Dynamic Range 96 dB 1 kΩ load at 1 kHz
Common Mode Rejection 45 dB minimum 10 Hz to 100 kHz
Preamplifier Output Clipping Level
1% THD
Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of
MX690 and MX890 Transmitter Specifications
RF Power 10 mW
Operating Range 30 m
Frequency Stability ±10 ppm
Maximum Frequency Deviation 45 kHz
Oscillator Type Phase-locked loop (PLL) controlled synthesizer
Power Requirements 3 V (2 AA alkaline or rechargeable batteries)
Battery Life ≥8 hours (alkaline)
Power Consumption 130 mA, ± 15 mA
Operating Temperature Range –18 – 57 °C
Dimensions (H x W x L) 43 mm x 87 mm x 148 mm
Weight MX690 Net: 318 g MX890 Net: 312 g
MX690 Net: 318 g (11,2 oz)
–33 dBV/Pa (22 mV)
–6 dBV (0.5 V)
output XLR connector or tip of 1/4” phone plug (both on SLX4 or SLX4L wireless receiver).
Note: Actual range depends on RF signal absorption, reflection, and interference
Note: Battery may limit this range
Packaged: 516 g Packaged: 530 g
MX890
Wireless Desktop Base
Available Models
MX690 Wireless boundary microphone, cardioid, mute switch
MX890 Wireless desktop base for MX405 and MX410 models, mute switch
Optional Accessories
SLX4 Wireless diversity receiver SLX4L Wireless diversity receiver with logic output
Architectural Specifications
MX690 – The microphone shall be a surface mounted, black condenser microphone with a cardioid polar pattern. The microphone shall include a bi-color LED status indicator and a programmable mute switch. The microphone shall have an integrated
wireless transmitter for audio signals with switchable carrier frequencies as well as preprogrammed groups up to 12 compatible
channels. An infrared signal shall be used to synchronize the frequency between transmitter and receiver. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency range shall be 50 Hz to 17 kHz and the
sensitivity shall be 22 mV/Pa.
MX890 – The wireless desk stand shall be a transmitter base for audio signals with switchable carrier frequencies as well as
preprogrammed groups with up to 12 compatible channels. An infrared signal shall be used to synchronize the frequency between
transmitter and receiver. The wireless desktop base shall be used with the MX405 and MX410 series gooseneck microphones and
shall feature a programmable mute switch.
www.shure.de
Page 12
MX202 Overhead Microphones
Easily hung from ceilings, Microflex Overhead Microphones capture sound from speakers, choirs, stages, and more conveniently and unobtrusively
from above. Compact and flexible, overhead microphones each feature a 10 cm (4”) gooseneck, multiple preamp options for easy installation into
ceilings or microphone stands, and versatile condenser cartridges for accurate sound reproduction in any setting.
Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Polar Pattern MX202/C: Cardioid
Output Impedance 150 Ω rated at EIA (180 Ω actual)
Sensitivity
(at 1 kHz , open circuit voltage;
1 Pascal = 94 dB SPL)
Maximum SPL
(1 kHz at 1% THD, 1 kΩ load;
All values +6 dB at 0 gain)
Equivalent Output Noise A-weighted Cardioid: 28.0 dB SPL
Signal to Noise Ratio
(referenced at 94 dB SPL)
Dynamic Range 1 kΩ load at 1 kHz 96.2 dB
Common Mode Rejection 10 Hz to 100 kHz 45 dB minimum
Preamplifier Output Clipping Level 1% THD –6 dBV (0.5 V)
Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to
Power Requirements 11 – 52 Vdc phantom, 2.0 mA
Environmental Requirements Operating temperature range: –18° C – 57° C
MX202/O: Omnidirectional
MX202/S: Supercardioid
Cardioid: –35.0 dBV/Pa (17.8 mV)
Supercardioid: –33.5 dBV/Pa (21.1 mV)
Omnidirectional: –27.5 dBV/Pa (42.2 mV)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
100 dB at 0 gain (internal modification)
pin 3 of output connector.
Relative humidity: 0 – 95%
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
MX202B/C, MX202B/S, MX202B/N Black mini-condenser microphone; includes cable, in-line preamplifier, and stand adapter
MX202W/C, MX202W/S, MX202W/N White mini-condenser microphone; includes cable, in-line preamplifier, and stand adapter
MX202BP/C, MX202BP/S, MX202BP/N Black mini-condenser microphone; includes cable and plate-mounted preamplifier
MX202WP/C, MX202WP/S, MX202WP/N White mini-condenser microphone; includes cable and plate-mounted preamplifier
MX202
Overhead Microphone
www.shure.de
Page 13
MX202 Overhead Microphones
Furnished Accessories
RK183WS (Black)
95B2064 (White)
RK202PK Preamplifier kit, plate mounted,
80A476 Clamp (MX202B & MX202WP) 80B489 Hang clip
Black snap-fit foam windscreen
White snap-fit foam windscreen
White (MX202BP & MX202WP)
65B1752 Stand adapter
RK100PK/
RK100PKW
(MX202B)
In-line preamplifier
(MX202W & MX202B)
Optional Accessories and Replacement Parts
A202BB Desk stand R183B (Black)
80A479 Strain relief
A57F Stativ adapter (MX202B) R185B (Black)
(MX202BP & MX202WP)
R183W (White)
R184B (Black)
R184W (White)
R185W (White)
Omnidirectional cartridge
for all Microflex models
Supercardioid cartridge
for all Microflex models
Cardioid cartridge for
all Microflex models
Architectural Specifications
MX202B/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck,
in-line preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
MX202B/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, in-line preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX202B/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck,
in-line preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and handheld
device s. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202W/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck,
in-line preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
MX202W/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, in-line preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
+20
+10
0
dB
–10
-20
20 2000010001000050 100
+20
+10
0
dB
–10
-20
20 2000010001000050 100
9876543298765432
Hz
MX202/C
9876543298765432
Hz
MX202W/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck,
in-line preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile and handheld
device s. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202BP/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck, a plate-mounted preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX202BP/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, a plate-mounted preamplifier, and black finish. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202BP/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck,
a plate-mounted preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and
handhe ld dev ices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202WP/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck, a plate-mounted preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX202WP/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, a plate-mounted preamplifier, and white finish. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202WP/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck, a plate-mounted preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile
and ha ndheld devic es. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202/S
www.shure.de
Page 14
MX391, MX392, MX393 Boundary Microphones
With slim design and superior audio reproduction, Microflex Boundary Microphones are the ideal conference room solution. Equipped with features like programmable,
silent membrane switches, interchangeable cartridges, logic inputs and outputs, and LED indicators, Microflex Boundary microphones provide high-quality sound for a
wide range of applications.
Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Polar Pattern MX391/C, MX392/C, MX393/C: Cardioid
Output Impedance EIA rated at 150 Ω (180 Ω actual)
Logic Connections
(MX392 Only)
Environmental Conditions Operating temperature range: –18° C – 57° C
Power Requirements 11 – 52 Vdc phantom, 2.0 mA
Sensitivity
(at 1 kHz, open circuit voltage; 1 Pascal =
94 dB SPL); All settings -12 dB at 0 gain
(internal modification)
Maximum SPL
1 kHz at 1% THD, 1 kΩ load; All settings
+6 dB at 0 gain (internal modification)
Equivalent Output Noise A-weighted Cardioid: 22.6 dB SPL
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Dynamic Range 1 kΩ load at 1 kHz 96.2 dB 94.0 dB
Common Mode Rejection 10 Hz to 100 kHz 45 dB minimum, 10 Hz to 100 kHz 45 dB minimum, 10 Hz to 100 kHz
Preamplifier Output Clipping Level 1% THD –6 dBV (0.5 V) –6 dBV (0.5 V)
Polarity Positive sound pressure on diaphragm
MX391/S, MX392/S, MX393/S: Supercardioid
MX391/O, MX392/O, MX393/O: Omnidirectional
LED IN: Active low (≤1.0 V), TTL compatible. Absolute maximum
voltage: –0.7 V to 50 V.
SWITCH OUT: Active low (≤0.5 V), sinks up to 20 mA, TTL compatible.
Absolute maximum voltage: –0.7 V to 50 V (up to 50 V through 3 kΩ).
Relative Humidity: 0 – 95%
MX391 MX392/MX393
Cardioid -29.5 dB (33.5 mV)
Supercardioid -28.3 dB (38.5 mV)
Omnidirectional -21.8 dB (81.4 mV)
Cardioid: 118.8 dB
Supercardioid: 117.5 dB
Omnidirectional: 110.7 dB
Supercardioid: 21.3 dB SPL
Omnidirectional: 14.5 dB SPL
Cardioid: 71.4 dB
Supercardioid: 72.7 dB
Omnidirectional: 79.5 dB
produces positive voltage on pin
2 relative to pin 3 of the preamplifier
XLR output
Cardioid: -27.5 dBV/Pa (42.2 mV)
Supercardioid: -26.5 dBV/Pa (47.3 mV)
Omnidirectional: -22.0 dBV/Pa (79.4 mV)
Cardioid: 117.0 dB
Supercardioid: 116.0 dB
Omnidirectional: 111.5 dB
Cardioid: 23.0 dB
Supercardioid: 22.0 dB
Omnidirectional: 17.5 dB
Cardioid: 71.0 dB
Supercardioid: 72.0 dB
Omnidirectional: 76.5 dB
Positive sound pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3 of output connector
(MX393) or red wire relative to black
wire (MX392).
MX391
Boundary microphone
MX392/ MX393
Boundary microphone
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, O = Omnidirectional, S = Supercardioid
MX391/C, MX391/S, MX391/O Black surface-mount microphone, attached 3.7 m cable terminated, 4-pin mini
MX391W/C, MX391W/S, MX391W/O White surface-mount microphone, attached 3.7 m cable terminated, 4-pin mini
MX392/C, MX392/S, MX392/O Surface-mount microphone, programmable membrane on/off switch,
MX393/C, MX393/S, MX393/O Surface-mount microphone, programmable membrane on/off switch, on/off indicator LED,
connector, separate preamplifier
connector, separate preamplifier
logic input/output terminals, on/off indicator LED, screw terminal connections,
attached 3.7 m unterminated cable
miniature three pin connector, and detachable 3.7 m cable.
www.shure.de
Page 15
MX391, MX392, MX393 Boundary Microphones
Furnished Accessories
95B2313 Zipper bag 80A541 Switch paint mask (MX392/MX393)
80C514 Paint mask (MX392/MX393) 36A664 Paint plug (MX392/MX393)
RK100PK In-line preamp (MX391/MX391W)
Optional Accessories and Replacement Parts
R183B Omnidirectional cartridge for all Microflex models C129 3,7 m cable 3-pin miniature connector (TA3F)
R184B Supercardioid cartridge for all Microflex models C130 Custom-logic cable with threaded adapter
R185B Cardioid cartridge for all Microflex models 15A525 Custom logic cable (specify length)
to male XLR (MX393)
+20
+10
0
dB
–10
-20
20 200001000 1000050 100
+20
+10
0
dB
–10
-20
20 200001000 1000050 100
MX391/C
Hz
MX391/S
Hz
9876543298765432
9876543298765432
MX392/C
MX393/C
MX392/O
MX393/O
+20
+10
0
dB
–10
-20
20 200001000 1000050 100
MX391/O
Hz
MX392/S
MX393/S
9876543298765432
www.shure.de
Page 16
MX391, MX392, MX393 Boundary Microphones
Architectural Specifications
MX391/C – The microphone shall be a surface mounted, black electret condenser microphone with a cardioid polar pattern,
a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
33.5 mV/Pa.
MX391/S – The microphone shall be a surface mounted, black electret condenser microphone with a supercardioid polar pattern,
a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
38.5 mV/Pa.
MX391/O – The microphone shall be a surface mounted, black electret condenser microphone with an omnidirectional polar
pattern, a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 81.4 mV/Pa.
MX391W/C – The microphone shall be a surface mounted, white electret condenser microphone with a cardioid polar pattern,
a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
33.5 mV/Pa.
MX391W/S – The microphone shall be a surface mounted, white electret condenser microphone with a supercardioid polar
pattern, a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 38.5 mV/Pa.
MX391W/O – The microphone shall be a surface mounted, white electret condenser microphone with an omnidirectional polar
pattern, a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 81.4 mV/Pa.
MX392/C – The microphone shall be a surface mounted, black electret condenser microphone with a cardioid polar pattern,
programmable membrane on/off switch, and logic controlled LED indicator. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 42.2
mV/Pa.
MX392/S – The microphone shall be a surface mounted, black electret condenser microphone with a supercardioid polar pattern,
programmable membrane on/off switch, and logic controlled LED indicator. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
47.3 mV/Pa.
MX392/O – The microphone shall be a surface mounted, black electret condenser microphone with an omnidirectional polar
pattern, programmable membrane on/off switch, and logic controlled LED indicator. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 79.4 mV/Pa.
MX393/C – The microphone shall be a surface mounted, black electret condenser microphone with a cardioid polar pattern,
programmable membrane on/off switch with LED indicator. The microphone shall include a removable 3.7 m cable, connected
to the microphone through a TA3F connector and which terminates to a XLR connector. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 42.2 mV/Pa.
MX393/S – The microphone shall be a surface mounted, black electret condenser microphone with a supercardioid polar pattern,
programmable membrane on/off switch with LED indicator. The microphone shall include a removable 3.7 m cable, connected
to the microphone through a TA3F connector and which terminates to a XLR connector. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall
be 47.3 mV/Pa.
MX393/O – The microphone shall be a surface mounted, black electret condenser microphone with a omnidirectional polar
pattern, programmable membrane on/off switch with LED indicator. The microphone shall include a removable 3,7 cm (12”)
cable, connected to the microphone through a TA3 connector and which terminates to a XLR connector. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the
sensitivity shall be 79,4 mV/Pa
www.shure.de
Page 17
MX150 Subminiature Condenser Lavalier Microphone
MX150B/O-TQG
MX150B/C-TQG
MX150B/O-XLR
MX150B/C-XLR
20
15
10
5
0
-30
-25
-20
-15
-10
-5
dB
Hz
20 100 1k 10k 20k
0,6 m (2 ft.) from sound source
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
6400 Hz
10000 Hz
2500 Hz
20
15
10
5
0
-30
-25
-20
-15
-10
-5
dB
Hz
20 100 1k 10k 20k
0,6 m (2 ft.) from sound source
The Shure Microflex MX150 is a professional subminiature electret condenser lavalier microphone ideal for use in speech and other
applications requiring low profile, discreet placement. Available with cardioid or omnidirectional patterns, the MX150 provides uncompromised sound quality and high reliability with minimalvisibility for use in television broadcasting, corporate and educational
lectures, A/V teleconferencing, and sound reinforcement.
Features
– Available in cardioid or omnidirectional polar patterns and TQG/TA4F (for use in Shure bodypacks) or wired XLR variations
– CommShield
– Matte black, sleek, low-profile, design for inconspicuous placement
– Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable
dress with minimized handling noise.
– Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
– User-changeable equalization caps for response shaping (omnidirectional only)
– Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
– Legendary Shure quality, ruggedness, and reliability
Available Models
Specifications
Transducer Type Electret condenser Electret condenser
Polar Pattern Cardioid Omnidirectional
Frequency Response 20 – 20 kHz 20 – 20 kHz
Output Impedance TQG: N/A, XLR: 165.5 Ω TQG: N/A, XLR: 165.0 Ω
Sensitivity
open circuit voltage, @ 1 kHz, typical
Maximum SPL
1 kHz at 1% THD, 2500 Ω Load
Signal-to-Noise Ratio TQG: 57.5 dB
Clipping Level
1 kHz at 1% THD, 2500 Ω Load
Common Mode Rejection
20 Hz – 20 kHz
Dynamic Range
@ 1 kHz, 2500 Ω Load
Self Noise
equivalent SPL, A-weighted, typical
Operating Temperature Range -18°C to 57°C -18°C to 57°C
Polarity TQG: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Power Requirements TQG: 5 V DC (0.04 – 0.18 mA)
Cable Length 1.52 m 1.52 m
Weight
®
technology guards against interference from cellular RF devices and digital bodypack transmitters
Microflex subminiature condenser lavalier microphone, omnidirectional, TQG connector
Microflex subminiature condenser lavalier microphone, cardioid, TQG connector
Microflex subminiature condenser lavalier microphone, omnidirectional, XLR connector
Microflex subminiature condenser lavalier microphone, cardioid, XLR connector
MX150/C MX150/O
TQG: -51.0 dBV/Pa (3.0 mV)
XLR: -39.0 dBV/Pa (11.0 mV)
TQG: 147.5 dB SPL
XLR: 134.5 dB SPL
XLR: 57.0 dB
TQG: 2.0 dBV
XLR: 1.0 dBV
TQG: N/A
XLR: ≥60 dB
TQG: 111.0 dB SPL
XLR: 97.5 dB SPL
TQG: 36.5 dB
XLR: 37.0 dB
TQG: -46.5 dBV/Pa (4.5 mV)
XLR: -34.5 dBV/Pa (19.0 mV)
TQG: 143.0 dB SPL
XLR: 130 dB SPL
TQG: 60.0 dB
XLR: 59.5 dB
TQG: 2.0 dBV
XLR: 1.0 dBV
TQG: N/A
XLR: ≥60 dB
TQG: 109.0 dB SPL
XLR: 95.5 dB SPL
TQG: 34.0 dB
XLR: 34.5 dB
XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
XLR: 11-52 V DC phantom power (IEC-61938),
< 2.2 mA
TQG: 21 g
XLR: 121 g
TQG: 5 V DC (0.04 – 0.18 mA)
XLR: 11-52 V DC phantom power
(IEC-61938), < 2.2 mA
TQG: 21 g
XLR: 121 g
MX150 with tie clip
and windscreen
180°
150°
120°
90°
90°
–20 dB
–15 dB
60°
–10 dB
–5 dB
30°
0
2500 Hz
6400 Hz
10000 Hz
180°
150°
120°
–20 dB
–15 dB
60°
–10 dB
–5 dB
30°
0
250 Hz
500 Hz
1000 Hz
MX150/C Polar Pattern
150°
120°
90°
60°
30°
150°
120°
90°
60°
30°
Accessories
WA150 Storage pouch for MX150
WA330 TQG/TA4F 4 pin connector
RK100PK XLR preamp
MX150/C Frequency Response
www.shure.de
1000 Hz
MX150/O Polar Pattern
Boost Cap
Normal Cap
MX150/O Frequency Response
Page 18
MX153 Earset Headworn Microphone
MX153B/O-TQG
MX153T/O-TQG
MX153C/O-TQG
20
15
10
5
0
-5
-10
-15
-20
20 100 1k 10k 20k
dB
FREQUENCY (Hz)
The Shure Microflex MX153 is a professional subminiature earset microphone ideal for speech and other applications requiring
low-profile discreet placement where improved gain before feedback over lavalier microphones is desired. Delivering exceptional
speech clarity, the MX153 is ideal for corporate and educational presentations, A/V conferencing and live sound reinforcement.
Available in three color options and direct TA4F connectivity to Shure bodypacks, the MX153 provides outstanding clarity in an
extremely comfortable, over the ear design.
Features
– Subminiature, omnidirectional cartridge offers superior speech clarity and enhanced plosive protection with no proximity effect
– Terminated with TQG/TA4F connector for direct connectivity to Shure wireless bodypack transmitters
– Ultra-lightweight, comfortable, flexible design is stable and easy to place over either ear
– CommShield
– Kevlar reinforced, attached soft-flex cable
– Matte black, tan, and cocoa color options available
– Includes protective storage pouch, 3 windscreens, and collar clip
Available Models
®
technology guards against interference from cellular RF devices and digital bodypack transmitters
Microflex earset headworn condenser microphone, omnidirectional, TQG connector, black
Microflex earset headworn condenser microphone, omnidirectional, TQG connector, tan
Microflex earset headworn condenser microphone, omnidirectional, TQG connector, cocoa
Specifications
Transducer Type Electret condenser
Polar Pattern Omnidirectional
Frequency Response 20 Hz – 20 kHz
Output Impedance N/A
Sensitivity
open circuit voltage, @ 1 kHz, typical
Maximum SPL
1 kHz at 1% THD
Signal-to-Noise Ratio 60 dB
Dynamic Range
@ 1 kHz
Common Mode Rejection
20 Hz – 20 kHz
Self Noise
equivalent SPL, A-weighted, typical
Operating Temperature Range –18°C – 57°C
Polarity Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements +1-5 V DC (500 μA maximum)
Weight 19.8 g
MX153
–41 dBV/Pa (9 mV)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
2500 Ω load: 73 dB
1000 Ω load: 73 dB
N/A
34 dB
Accessories
WA150 Storage pouch for MX150
WA330 TQG/TA4F 4 pin connector
RK100PK XLR preamp
MX153 Earset
Headworn Microphone
www.shure.de
Page 19
MX183, MX184, MX185 Lavalier Microphones
Attached to a tie or lapel, Microflex Lavalier Microphones offer freedom of movement to any situation involving voice reproduction. As stylish as they are
convenient, Lavaliers are available in different directional patterns, come with multiple clip options, and are compatible with all Shure wireless platforms.
Specifications
Type Condenser (electret bias)
Frequency Response 50 Hz – 17 kHz
Polar Pattern MX183: Omnidirectional
Output Impedance EIA rated at 150 Ω (170 Ω actual)
Sensitivity
(at 1 kHz, open circuit voltage; 1 Pascal =
94 dB SPL; all settings -12 dB at 0 gain)
Maximum SPL
(1 kHz at 1% THD, 1 kΩ load;
all settings +6 dB at 0 gain)
Equivalent Output Noise A-weighted MX183: 20.5 dB
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Dynamic Range
1 kΩ load at 1 kHz
Common Mode Rejection
10 Hz to 100 kHz
Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Environmental Conditions Operating temperature range: –18°– 57° C
Power Requirements 11 – 52 Vdc phantom, 2.0 mA
Cable Shielded 1.2 m cable terminated with a 4-pin female
MX184: Supercardioid
MX185: Cardioid
MX183: –27.5 dB (42.2 mV)
MX184: –33.5 dB (21.1 mV)
MX185: –35.4 dB (17.0 mV)
MX183: 116.7 dB
MX184: 122.7 dB
MX185: 124.2 dB
MX184: 26.5 dB
MX185: 28.0 dB
MX183: 73.5 dB
MX184: 67.5 dB
MX185: 66.0 dB
96.2 dB
100 dB at 0 gain (internal modification)
45 dB minimum
of output XLR connector.
Storage temperature range: –29° – 74° C
mini connector (TA4F)
MX183/ MX184/ MX185
Lavalier microphone
Available Models
MX183 Omnidirectional, includes belt-clip preamp, rotatable tie clip, dual tie clip, snap-fit windscreen
MX184 Supercardioid, includes belt-clip preamp, rotatable tie clip, dual tie clip, snap-fit windscreen
MX185 Cardioid, includes belt-clip preamp, rotatable tie clip, dual tie clip, snap-fit windscreen
www.shure.de
Page 20
MX183, MX184, MX185 Lavalier Microphones
Furnished Accessories
26A13 Zipper bag RK183T1 Tie clip
RK261BWS Foam windscreen RK183T2 Dual tie clip
RK183WS Snap-fit windscreen RK100PK In-line preamp
80A67 Hex wrench #4
Optional Accessories and Replacement Parts
R183B Omnidirectional cartridge
MX1BP Battery powered preamp 53A2133A Belt clip for in-line preamp WA333 4-pin female mini connector (TA4F)
C133 Replacement cable,
for all Microflex models
Microphone to preamp
Architectural Specifications
MX183 – The microphone shall be black electret condenser lavalier microphone with an omnidirectional polar pattern, in-line belt-clip
preamp, and 1.2 m cable that terminates with a 4-pin miniature (TA4F) connector. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 42.4 mV/Pa.
MX184 – The microphone shall be a black electret condenser lavalier microphone with a supercardioid polar pattern, in-line belt-clip preamp,
and 1.2 m cable that terminates with a 4-pin miniature (TA4F) connector. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa.
MX185 – The microphone shall be a black electret condenser lavalier microphone with a cardioid polar pattern, in-line belt-clip preamp, and
1.2 m cable that terminates with a 4-pin miniature (TA4F) connector. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.0 mV/Pa.
R184B Supercardioid cartridge for all
Microflex models
R185B Cardioid cartridge for all Microflex
models
MX183
+20
+10
0
dB
–10
-20
20 2000010001000050 100
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany
Phone: +49-7262-92490
Fax: +49-7262-9249114
Email: info@shure.de
www.shure.eu
MX185
Hz
9876543298765432
+20
+10
0
dB
–10
-20
20 2000010001000050 100
MX184
9876543298765432
Hz
www.shure.eu
© 2017 Shure Incorporated
Whilst every ef fort has b een made to ensure that the information in this do cument is correct, we accept no liability in
respect of errors or o missions. All specifications within this do cument are subject to chan ge without notice.
06/17
Loading...