Shure ME910EJ User Guide

222

HARTREY

AVE..

EVANSTON.

IL.

60204

U

S.A

TWX:

910-231-0048

-- --

TELEX:

THE PREMIER FAMILY OF STEREO SOUND REPRODUCERS

STEREO DYNETIC@

PHONOGRAPH CARTRIDGE

CARTRIDGE AND STYLI SPECIFICATIONS

ep

'E*

$2

e5

400

20

to

within

20

N75EJ

Type

10

X

(.0004

.0007

Biradial

(Elliptical)

-

N75-31.
64

microns

(.W25

Spherical

toptional
'Output voltages glven tor stereo cut record. For MONO cut record,

**Tracking forces greater than maximum indicated should not be used.
NET WEIGHT:

INDUCTANCE:
DC RESISTANCE:
OPTIMUM LOAD:

iarads total capacitance per channel. Load resistance can be up to
ohms w~th almost no audible change in frequency response. Total capaci­tance includes both tone arm wiring and

FOUR-CHANNEL:
four-channel matrix systems.

MONOPHONIC OPERATION: Set function
or
right channels in parallel.

CONNECTIONS (see Figure 1):
ground
left ground (usually blue) to "LC." If metal head is causing ground loop
hum,
trom the r~ght channel ground by the removal of the ground tab.

CAUTION: Do not make solder
connection to cartridge terminals.

STYLUS REPLACEMENT (see Fig­ure
stylus and gently pull forward
out of cartridge. Insert replace­ment stylus into socket and press

until housing mates with cartridge
case. FIGURE

MOUNTING
mounting centers]:

Mounting screws are provided.

1.

2

3.

4.

Light

5.0

mV

20,000

Green

2

18~

X

in.)

--

-..

Dark

6.2

Green

in.)

78

output voltage at both
will be

71%

mV

rpm Stylus: Set amplitier to "MONO" or

ot

i~gures above.

6.2

gid111s

720

mill~henr~es

630

ohms

47,000

Tl?is Stereo Dynetic@ cartridge is compatible with all

"A+B."

li

amplifier

ii~sually green) to

remove the ground tab. The metall~c cartridge shield is disconnected

2):

Grasp molded housing oh

[12.7

Remove stylus guard and stylus
(see Stylus Replacement).

Connect leads to cartr~dge (see

1).

Figure

Lay cartridge in shell and align
mounting holes on side of car­tridge with holes or threads in
shei. Follow turntable manu­facturer's instructions to
cartridge in tone arm or plug-in
shell.

Reinsert stylus (see Stylus Re­placement).

is not equipped with this switch, connect left and

mm (1/2 in.)

2

HZ

.

-

-

20

to

20,000

Hz

left channel and r~ght channel rartr~dge terminals

ohms resistance in parallel with

R~ght "hot" lead (usually red) to

"RG."

Left "hot" lead (usually white) to

InoUnt

dB

lv2

at

dB

1.000
Hz

-

sw~tch on amplifier to "MONO"

;%EL

to

3

grams

-

-

1%

to

3

grams

amplif~er input circuit.

-

62

FIGURE

Hz - 28

1,000 Hz - 35

10,000 Hz - 20

at 2 grams

-

-

"AS-B."

400

to

500

"R,"

TERMINAL

GROUNDED

TO

1

&I

2

72.4381

cmlsec
cm/sec
cm/sec

pico-

70,000

right

"L,"

CASE

-

Copyr~ght 1979, Shure Brothers Inc.
27A1447

(SG)

(OVER)

Printed in U.S.A.

RECOMMENDED STYLUS CLEANING: Use a camel's hair brush (No. 2 size
or smaller), trimmed to approximately
an alcohol-distilled water solution Commercial cleaning solutions may cause
rtylus damage or corrosion. Always brush stylus from back to front; never
brush or

TO PRESERVE STYLUS LIFE:

1.

2.

3.

&

5.

6. Use proper vertical tracking force setting for each cartridge.

7.

8.

SPECIAL NOTE: lo
cartridge, be certain that any replacement stylus you buy bears the
Ing certificat~on on the package: "This Stereo Dynetic@ stylus is precision
manufactured by Shure Brothers Inc." AVOID INFERIOR IMITATIONS. THEY
WILL SERIOUSLY DEGRADE THE PERFORMANCE OF YOUR CARTRIDGE.
ALL GENUINE
BROTHERS INC. LOOK FOR THE NAME SHURE

For more information on your Shure stylus, write for booklet:
the Small World of

FULL ONE-YEAR WARRANTY: Shure Brothers lncorporated ("Shure"),
222 Hartrey Avenue, Evanston, Illinois 60204, warrants to the owner of this

product that it will be free, in normal use, of any defects in workmanship

and materials ior a period of one year from date of purchase. You should

retain proof

damages.

fully repack the unit and

If you are not in the United States, return the unit to your dealer or

Authorized Service Center for repair. The unit will be repaired or replaced

and returned to you promptly, and it it cannot be repaired or replaced,

you may elect to receive a refund. This warranty does not include stylus wear.

PATENT NOTICE: Cartridge and stylus manufactured under one or more
of the following U.S. patents: 3,055,988, 3,077,521, 3,077,522, and 3,463,889.

wlpe stylus from front to back or side to side.

Follow turntable or tone arm instructions when adiustine. antiskatinn

iorce.
Do not handle the tone arm while it is in operation since this may
cause the arm to sweep across the record.

If ~t is necessary to manually place the tone arm in the record groove
while turntable is rotating, release it as soon as the stylus engages the
record groove.
Correct improper set-down adjustment or malfunction of the turntable
chang~ng mechanism to prevent the stylus from striking the edge of the
turntable or record. Do not stack more records than turntable manufac-

turer recommends.

Take care to properly insert the stylus into the cartridge assembly and

the cartridge and shell assembly into the tone arm receptacle.
Do not use badly warped, cracked or imperfect records.

When dust~ng the turntable protect the stylus with the stylus guard.

of date of purcliav. Shurc is not liable for any consequential

li this Shure produc, has any defects as described above, care-

ma~ntain the original performance standards of your

"DYNETIC@" STYLI ARE MANUFACTURED

a

Stylus."

rriurn it prepaid to:

Brothcrs lncorporated

Shure
Attention: Service Department
1501 West Shure Drive
Arl~ngton Heights, Illinois 60004

6

mm (1/4 in.), dipped in alcohol or

.

-

follow-

BY

ON

THE

SHURE

STYLUS GRIP.

"A

Visit to

Manufactured

by

Shure Brothers lncorporated

222 Hartrey Avenue, Evanston,

IL

60204