Shure Legendary Performance SRH145 User Manual
SRH145
Portable Headphones
Casques portables SRH145
Auriculares portátiles SRH145
Fones de Ouvido Portáteis SRH145
©2014 Shure Incorporated
27A24999 (Rev. 2)
SRH145 Portable Headphones
SRH145 Portable Headphones provide deep, rich bass with a full range of
sound in a comfortable, lightweight design. The closed-back construction
provides good external noise isolation, while the collapsible design and
adjustable, padded ear cups ensure long-lasting comfort and ergonomic fit for
on-the-go-use.
Model Variations
"m+" models include an inline three-button remote and microphone for send/
end functionality, volume, and playback control.
Adjusting the Headset
Adjust the headband for a comfortable fit.
Using the Remote (m+ models only)
Use the remote to control compatible media phone players.
Play music Click the center button
Pause music Click the center button
Change volume Click the volume up
Go to next track Double-click the center
Go to previous
track
Restart current
track
Fast-forward Double-click and hold
Send/End Call Click the center button
For more information about compatible models go to: www.shure.com
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an
electronic accessory has been designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use
of this accessory with iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
iPad mini, and Lightning are trademarks of Apple Inc. The trademark "iPhone"
is used with a license from Aiphone K.K.
once
once.
(+) or volume down (-)
button to increase or
decrease the volume.
button.
Triple-click the center
button.
Triple-click after 6
seconds.
the center button.
once.
Replacement Parts
HPAEC145
1 Pair of Replacement Ear Cushions
Certifications
This product meets the Essential Requirements of all relevant European
directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/
europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: EMEAsupport@shure.de
Specifications
Transducer Type
Dynamic, Neodymium magnet
Driver Size
36 mm
Frequency Response
25 to 18,000 Hz
Sensitivity
@ 1 kHz
100 dB/mW
Impedance
@ 1 kHz
34Ω
Maximum Input Power
@ 1 kHz
200 mW
Weight
Net
150 g
Connector
3.5 mm (1/8")
Cable
1.5 m
3
Loading...