©2005, Shure Incorporated
27EN3206 (Rev. 1)
Sound Isolating Earphones
E3g
Sound isolating gaming earphones
featuring WideBand MicroDriver
technology for extended-frequency
audio. Lightweight and stylish,
the E3g is a perfect choice for
enhancing portable gaming
devices and other audio
sources
Printed in U.S.A.
WEARING THE EARPHONES
Three popular methods for wearing the earphones are illustrated below.
Over the ear
in back
Tighten the cable and take up slack by raising the cable sleeve .
Over the ear
in front
Straight down
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.
Warning:
Do not push the earphone sleeve beyond the ear canal opening.
left ear
Make sure that the sleeve completely
covers the earphone nozzle. If any part
of the nozzle is exposed, the sleeve is
not properly installed.
right ear
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, fits comfortably, and is easy to remove from
your ear.
Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Foam Sleeves
When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal.
Triple-Flange Sleeves (Optional Accessory)
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.
CLEANING THE EARPHONE NOZZLE
If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.
Wax Removal Loop
Nozzle
When cleaning, do not force any object through the earphone nozzle! This will
damage the earphone sound filter.
FULL TWO YEAR WARRANTY
Shure Incorporated (“Shure”) hereby warrants that this product will be free
from defects in materials and workmanship for a period of two years from
the date of purchase. At its option Shure will repair or replace the defective
product and promptly return it to you, or refund the purchase price. You should
retain proof of purchase to validate the purchase date and return it with any
warranty claim.
If you believe this product is defective within the warranty period, carefully
repack the unit, insure it, and return it postage prepaid to:
Shure Incorporated
5800 W. Touhy Ave.
Niles, IL 60714-4608
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Europe, Middle East, Africa:
Asia, Pacific:
SAFE USE
Use a slow twisting motion to remove the earphones. Never pull
on the earphone cord.
Warning: If a sleeve becomes lodged in your ear, seek skilled
medical assistance to remove the sleeve. Damage to the ear
may be caused by non-professionals attempting to remove the
sleeve.
Prior to inserting the earphone, always recheck the sleeve to
make sure it is firmly attached to the nozzle.
Turn up the volume control only far enough to hear properly.
Ringing in the ears may indicate that the volume level is too high.
Try lowering the volume.
If you connect these earphones to an airplane’s sound system,
listen at low levels so that loud messages from the pilot do not
cause discomfort.
Have your ears checked by an audiologist on a regular basis. If
you experience wax buildup, discontinue use until an audiologist
has examined your ears.
Stop using the earphones if they are causing great discomfort or
infection.
FURNISHED ACCESSORIES
Carrying pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95B2232
Fit Kit w/cleaning tool and replacement sleeves . . . . 90XJ1371
REPLACEMENT PARTS
Bag of 20 foam sleeves . . . . . . . . . . . . . . . . . . . . . . . PA750
Bag of 500 foam sleeves . . . . . . . . . . . . . . . . . . . . . . PA754
Bag of 10 clear flex sleeves (small) . . . . . . . . . . . PA756S
(medium) . . . . . . . . . PA756M
(large) . . . . . . . . . . . PA756L
Bag of 10 soft flex sleeves (small) . . . . . . . . . . . PA758S
(medium) . . . . . . . . . PA758M
(large)
Triple-flange sleeves (2)
. . . . . . . . . . . . . . . . . . . . . . PA755
. . . . . . . . . . . PA758L
TECHNICAL SPECIFICATIONS
Transducer type Low mass/high energy
Sensitivity (at 1kHz) 113.5 dB SPL/mW
Impedance (at 1kHz) 29 Ω
Output connector Gold-plated 3.5 mm (1/8-inch) stereo plug
Net weight 28 g (0.9 oz)
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often find
custom-fit molded sleeves offer the best comfort and sound isolation.
Ask a Hearing Health Care Professional about creating custom molded sleeves
for your earphones. For more information, contact:
Sensaphonics Hearing Conservation Toll Free: (877) 848-1714
660 N. Milwaukee Avenue
Chicago, IL 60622
e-mail:saveyourears@sensaphonics.com
www.sensaphonics.com
In Chicago: (312) 432-1714 (ph)
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve
and nozzle, improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
Do not expose earphones to extreme temperatures.
Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2)
environments.