Page 1
Discussion and Conferencing
DIS-CCU CENTRAL CONTROL UNIT
Quickstart Guide
Page 2
1. Introduction
Quick Setup Guide
This quick setup guide applies to
most DDS 5900 Discussion System
installations with up to 50 microphone
units.
To operate with the DCS-6000
Conference System, simply add a feature
3. Up and Running 4. Computer Control2. Prepare the Units
license to the DIS-CCU. See the Shure
website for information on obtaining and
installing a license.
Important: Do not turn on the
CCU until all microphone units are
connected.
Online Manuals
For more information, refer to the full
system manuals available on Shure.com.
DIS-CCU Quick Setup Guide
Page 3
1. Introduction
System Overview
① Central Control Unit (CCU)
System processor: provides power and control to the
microphone units, analog audio inputs and outputs for
external equipment, and a web server to access the
DDS 5900 web interface for complete system control.
3. Up and Running 4. Computer Control2. Prepare the Units
② Microphone units
Participants use the microphone units to speak and
listen to other members of the event. Available in two
types:
• DC 5980 P portable unit: Integrated unit that sits on the
table surface. It is programmable as chairman, delegate, or
interpreter.
• DC 5900 F flushmount unit: Modular unit that installs
into the table. It is programmable as chairman or delegate.
③ Browser Interface
Provides full control, set up, and monitoring of the
discussion. Accessible from a computer or tablet
networked with the CCU.
④ Shielded Cat5e cables (not included)
Used to connect DIS devices. Visit the Shure website
for information on high-quality, Shure pre-tested
cables in various lengths from 0.5 m to 100 m.
DIS-CCU Quick Setup Guide
Page 4
1. Introduction
DC 5900 FDC 5980 P
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Select the Button Overlay
Button overlays vary to support multiple
user roles:
① Chairman
② Participant
③ Interpreter (DC 5980 P only)
3. Up and Running 4. Computer Control2. Prepare the Units
DIS-CCU Quick Setup Guide
Page 5
1. Introduction
Attach the Overlay
Remove the adhesive back and carefully
place the overlay on the unit.
Note: Overlays are not reusable.
3. Up and Running 4. Computer Control2. Prepare the Units
DIS-CCU Quick Setup Guide
Page 6
1. Introduction
Insert the Microphone
Tip: Lock the microphone using the
supplied hex key.
3. Up and Running 4. Computer Control2. Prepare the Units
DIS-CCU Quick Setup Guide
Page 7
1. Introduction
A B C D
Shielded Cat5e cable
3. Up and Running 4. Computer Control2. Prepare the Units
Connect the CCU to the Microphone Units
1. Use the DCS-LAN outputs on the CCU
to connect to the first unit.
2. Connect each unit to the next for the
remainder of the units.
Important: Always use shielded Cat5e
cables or higher.
DIS-CCU Quick Setup Guide
Page 8
1. Introduction
PS-CCU
DIS-CCU Central Control Unit
Power On the CCU
1. Use the PS-CCU power supply to
connect the CCU to an AC power source.
2. Press the power button and wait for the
system to power on completely.
3. Up and Running 4. Computer Control2. Prepare the Units
DIS-CCU Quick Setup Guide
Page 9
1. Introduction
DC 5980 P
Program the Microphone User Role
DC 5900 F
The button overlay automatically programs the
user role.
DC 5980 P
Manually program the unit to match the button
3. Up and Running 4. Computer Control2. Prepare the Units
overlay:
a) Press and hold the volume buttons ‘‐‘ and ‘+’
until the ‘Speak’ LED flashes (~3 seconds).
Continue to hold.
b) While holding, press the channel button to
toggle between unit types. The type is indicated
by the channel LEDs:
User Role Channel 1 Channel 2
Participant with mute
button
Participant without
mute button
Chairman Off On
Interpreter On On
c) Release the buttons and wait until the unit
Off Off
On Off
restarts.
DIS-CCU Quick Setup Guide
Page 10
1. Introduction
Test the Microphone Audio
Turn on a microphone unit to test the
audio. The LED illuminates red and the
audio is distributed to the other units'
loudspeaker.
Note: The system defaults to Auto
3. Up and Running 4. Computer Control2. Prepare the Units
(automatic) speaker mode, allowing
participants to control their own
microphone. See the full manual
online for information on other speaker
modes.
DIS-CCU Quick Setup Guide
Page 11
1. Introduction
TCP/IP
Connect a Computer to the CCU
Use the TCP/IP port on the CCU to connect
a computer for system control from a web
browser.
3. Up and Running 4. Computer Control2. Prepare the Units
DIS-CCU Quick Setup Guide
Page 12
1. Introduction
DIS-CCU Central Control Unit
IP address
169.254.005.001
Note the IP Address of the CCU
Use the menu on the CCU front
panel: LAN setup > IP Address >
Setup IP address.
3. Up and Running 4. Computer Control2. Prepare the Units
DIS-CCU Quick Setup Guide
Page 13
1. Introduction
169.254.5.1
169.254.5.1
Open the Web Interface
Type the IP address of the CCU into a
browser window on the computer to access
the system interface.
Note: Remove any zeros before a
3. Up and Running 4. Computer Control2. Prepare the Units
number within an octet. For example,
for an IP address that displays on CCU
menu: 169.254.005.001, type into the
browser URL bar: 169.254.5.1
DIS-CCU Quick Setup Guide
Page 14
Europe, Middle East, Africa:
PT. GOSHEN SWARA INDONESIA
Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat
I.16.GSI31.00501.0211
Loading...