Shure DC 6120 P Specification Sheet
DC 6120 P Conference Unit
• Conference unit for tabletop placement
• Configurable for chairman or delegate functionality
• Lockable XLR microphone connector
• Reply function to allow brief comments or questions during a conference
• Two headphone jacks for listening to the floor
• Exchangeable buttons
• Loudspeaker
DIS Digital Conference Systems
DM 6120 P Conference Unit
Description
The DC 6120 P is a fully digital portable conference unit in the DIS DCS 6000 Digital
Conference System.
The DC 6120 P can be configured for a chairman or a delegate (default). The unit is
easily configured by holding down the mute and the microphone button while pressing the left volume button for 10 seconds (up for chairman, down for delegate). The
configuration is stored in the unit so it recalls its configuration if it is used in another
system setup.
The microphone button enables the user to activate/deactivate the microphone,
indicated by the LED ring on the microphone. A headphone jack and built-in loudspeaker are provided to listen to other speakers. While the microphone is in use, the
loudspeaker is automatically turned off.
To support both configurations, the left button changes functionality to a mute or
all-delegate off button. The chairman configuration enables 'all delegates off' functionality to immediately silence all microphones, leaving the chairman with exclusive
speaking rights. The delegate configuration uses this button as a mute button to
temporarily mute the audio while retaining speaking privileges.
The function button can be exchanged to match the current functionality of the unit,
including the Reply feature. Improving the flow of the conference, Reply mode enables the user to briefly comment or ask a question to the present speaker without
affecting the current speakers or request queue. Reply mode is available in VOX,
Manual, and Automatic microphone operating modes.
The gooseneck microphones GM 652x or GM 6622 can be locked to the unit with a
1.5 mm hex key. The lock is accessible from the small hole below the DIS logo on
the side of the XLR socket. Turn the hex key counter clockwise to lock the gooseneck microphone to the unit and turn the hex key clockwise to unlock the gooseneck
microphone from the unit.
The DC 6120 P can be combined with any conference units from the DCS 6000
Digital Conference System.
Features
The DC 6120 P has the following standard features:
• Conference unit delegate or chairman operation
• Supports Reply functionality to briefly comment or ask a
question to the present speaker
• Functions in all DIS microphone operation modes: Automatic,
FIFO, Manual and VOX (voice activation)
• Support for three microphone interrupt modes enabling 'ping
pong' mode
• Voice activation and automatic-off microphone features
• Headphone connectors for listening to the floor
• Fully digital audio transmission
• Two RJ-45 ports provide power, audio, and control transport
across a single chain of chairman, delegate, and interpretation
units
• DCS-LAN connection uses CAT 5e (or higher) shielded F/UTP
or U/FTP cabling
• Exchangeable buttons for alternate functions and different
languages
• Lockable XLR gooseneck microphone connector
• High-quality loudspeaker for listening to the conference
Specifications
How To Order
Electrical
Frequency response (headphones)
Frequency range (loudspeaker)
Power consumption
Power maximum (loudspeaker)
Signal-to-noise ratio
Headphone connection
65 Hz-16 kHz
150 Hz-15 kHz
2.5 W
3.0 W RMS
THD
< 0.1 %
> 90 dBA
3.5 mm jack, female stereo socket
Interconnections
DCS-LAN
Two RJ45 female sockets with
auto-termination
Mechanical
Mounting
Dimensions (H x W x D)
Temperature range
Weight
Color
Tabletop
61 x 150 x 168 mm
650 g
Black
5° to 40° C
Certifications
The DCS 6000 system conforms to standard IEC 60914.
Portable conference unit for DCS 6000. Features integrated loud-
English Reply button DC 61xx -10PK
speaker and CM buttons.
Spare Part Set DCS 6000 P
DRAWING
DC 6120 P
ACC-DC 61xx 10PK
SPS DCS 6000 P
Loading...