Shure CU 6105 Specification Sheet

CU 6105 Central Unit
• Central processor for the DCS 6000 Digital Conference System
• Controls a system with up to 500 conference units
• Supports up to 16 interpretation channels
• Provides microphone and voting control
• TCP/IP Ethernet interface
• Reply function allows brief comments or questions without interrupting the speaker list or request queue
• Web browser control
• Four analog outputs (group or interpretation channels out)
DIS Digital Conference Systems
CU 6105 Central Unit
Description
The CU 6105 is a system controller for the DCS 6000 Digital Conference System. It is used for installations ranging from small systems with only a few conference units, to large systems with hundreds of conference units, channel selectors, interpretation and voting facilities.
The CU 6105 controls a system of up to 500 conference units and 150 in­terpreter units. Units are connected in a single bus cable structure known as the DCS-LAN; a proprietary high-speed digital audio, data and power bus. Units are connected in series daisy chained using CAT 5e (or higher) F/UTP or U/FTP cables, enabling highly flexible and inexpensive installa­tions. To expand the number of participants, simply add inline data repeat­ers, junction boxes and power supplies to support hundreds of participants in multiple languages.
The CU 6105 features fully digital audio transmission of the floor chan­nel, 16 interpretation channels and audio from the conference units at the same time. The audio from units can be combined into four groups using a built-in group matrix.
The CU 6105 features two analog audio inputs and four analog audio outputs. The four analog audio outputs are routed from four groups of con­ference units, the floor mix or the interpreter channels. This is useful for connecting to external PA systems, recording audio, or language distribu­tion systems like the DIS Digital Wireless Infrared System. An Emergency Evacuation Message (EEM) is available using input 2 and a contact clo­sure switch, overriding the audio content in the event of an emergency.
The OLED display on the front of the unit enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode etc.
The CU 6105 provides a web interface that is accessed from a mobile device or computer over TCP/IP. The interface allows system setup and simple microphone control from any computer connected to the network. For advanced system management and conference control, SW 6000 Conference Management Software is available. The CU 6105 also pro­vides a simple to use protocol for external control over Ethernet.
Features
The CU 6105 has the following features:
• System control for the DCS 6000 Digital Discussion system
• Powers up to 60 units without an extra power supply
• Supports a system of up to 500 conference units and 128 interpretation stations
• Supports up to 16 interpretation channels and a floor mix of up to eight open microphones
• Expanded functionality with SW 6000 Conference Management software
• Multi-language web browser for system configuration, microphone control and basic operational parameters
• RJ-45 ports provide power, audio, and control transport across a chain of chairman, delegate, and interpretation units
• Daisy-chain topology with loop-through connections or star topology
• Digital audio transmission with proprietary codec algorithm prevents unauthorized listening of the audio signal
• DCS-LAN connection using CAT 5e (or higher) shielded F/UTP or U/ FTP cabling
• Supports Reply functionality to briefly comment or ask a question to the present speaker
• Support for 4 microphone modes; Automatic, FIFO and Manual and VOX (voice activation)
• Four analog audio outputs for group or interpretation channels
• TCP/IP Ethernet connection for browser control, SW 6000 and third party external control (AMX, Crestron etc.)
• Built-in table for attaching seat numbers/names to units using a browser
Upgrade the CU 6105 with feature licenses for the following features:
• Control of up to 500 conference units
• Up to 16 interpretation channels
• Voting (3- and 5-button, attendance check)
• Microphone operation mode VOX (voice activation)
Specifications
Mechanical
System Performance
The following table provides maximum number unit and channel counts per DCS 6000 system.
Max. number of conference
Max. number of open "floor"
microphones
Max. number of languages
(interpreter channels)
Max. number of interpreter
Max. number Audio Output
Max. number Channel
Selectors
units
units
Units
500
8
16
System: 128 In each booth: 32
20
Unlimited
Network
DCS-LAN outputs
TCP/IP
Two (2) RJ45 female sockets
One (1) RJ45 female sockets
Audio
Mounting
Dimensions (H x W x D)
Weight
Temperature range
• tabletop
• standard 19" rack
44.4 x 426 x 186 mm (1.75 x
16.8 x 7.2 in.)
Color
Black
2.8 kg (6.17 lbs.)
Storage: -20° to 60° C, 10­80% humidity Operation: 5° to 40° C, 35­80% humidity
PS CU External Power Supply (SNP-A15T):
Main voltage
Max. consumption
Total supply power
Standby consumption
Supply voltage
Efficiency
Inrush Current
[1] De-rate linearly to 50% @ 60°C
100-240 V, 50-60 Hz nominal
175 W
144 W (power factor: >0.9)
<0.5 W (no load)
48V/3A @ 40°C
87%, typical
• 230 V: <80 A
• 115 V: <40 A
[1]
Audio inputs
Analog Inputs
Emergency input - EEM
Nominal input level
Max. input level
Input Impedance
Audio outputs
Analog audio out
Maximum load
Nominal output level
Max. output level
Electrical
Power consumption
Supply voltage for discus-
Sound quality
Frequency response
Signal-to-noise ratio
sion units
THD
Two (2) 3-pin female XLR socket (electronically balanced)
Input 2 with contact closure
switchable:
• 0 dBm (0.775V RMS)
• -10 dBm (0.245V RMS)
+15 dBm (4.5V RMS)
50-100 kΩ
Four (4) 3-pin male XLR sock­ets (electronically balanced)
> 1 k ohm
0 dBm at nominal input
4.9V RMS ~ +16 dBm
22W/48V (150W max.)
122W/48V
24 bit audio, 32 kHz sampling frequency
65 Hz-16 kHz
< 0.1 %
> 85 dBA
Certifications
The DCS 6000 system conforms to standard IEC 60914.
Loading...
+ 1 hidden pages