MID PA0752
User Manual
User Manual
Notice
• Before operating the device, please read the safety precautions and
user’s guide carefully to ensure safe and proper usage.
• The descriptions in this user’s guide are based on the factory default
settings.
• The pictures and screenshots in this user’s manual may slightly
differ from the look of your tablet.
• The format and information of this user’s manual is based on
Google Android 4.0 ICS operating system.
• The applications and their functions vary according to their release
date and the operating system that they were designed for. 4Sight,
LLC won’t be responsible for problems in performance caused by
third party applications.
1
Introduction of device and accessories
Accessories...........................................................................................3
Battery charging..........................................................................3
Appearance.................................................................................5
Turning on/off............................................................................6
Touch screen usage....................................................................7
Operation interface.....................................................................7
Main interface description..........................................................8
Adding and deleting shortcuts on the main screen...................10
Connecting to PC through USB...............................................12
Basic settings............................................................................13
Troubleshooting........................................................................20
Safety precautions.....................................................................20
Contents
2
Introduction of device and accessories
Introduction of device and accessories
Introduction of device and accessoriesIntroduction of device and accessories
Accessories
After unpacking, first check that the following items are included:
• Tablet
• USB cable
• AC/DC Adapter
• 4Sight, LLC will not be responsible for any incompatibility or
damage caused by third party accessories.
Battery charging
The device is equipped with a built-in battery. Charge the battery
fully before using the device for the first time. It is recommended to
charge the device for a minimum of at least ten hours for first use.
Only use the provided charger or USB cable (input: AC110~240V
50/60Hz; output: DC5V/2.5A). 4Sight, LLC will not be responsible
for any device damage caused by an unapproved charger.
• The user can’t replace the built-in battery. Please contact the
service provider for information on battery replacement.
• You can charge the battery with the charger or USB cable.
• When the battery level drops lower than 15%, the device will
send an alert and display a low battery message. The battery icon
in the lower right corner also appear empty. If the battery
power runs out, the device powers off automatically. Connect
the charger before attempting to power the unit back on.
• If the battery completely runs out, the device cannot be
turned on even when first connecting the power adapter. In this
instance, charge the unit for five minutes and power it back on.
• You can use the device while charging, but this will increase
3
the charging time.
• While charging, the battery icon will display the ‘charging’
lightning bolt
• It is normal for the device to become hot while charging, the
device’s battery life and performance will not be affected.
• When the battery is fully charged, please disconnect the
power adapter.
Full charging requires roughly 4 hours.
The battery is consumed faster if APPS or WiFi is running in
background. To save battery power, close unused applications. You
can also reduce the battery consumption time by turning down the
brightness of the display also, when being unused, press the power
button [ ] to switch the unit to sleep mode.
4
Appearance:
Front View:
5
Rear View:
Rear View:
Rear View:Rear View:
6
Number#
Description
1
2
3
Camera
Power button, Power on/off
Earphone jack, 3.5mm standard earphone jack
Micro USB interface. Used for: charging, connecting
4
5
6
7
8
9
10
to external USB devices, as well as connecting to your
PC for data transmission
Charging interface, support DC5V/2.5A adapter
VOL up button, VOL+
Micro Memory Card Slot, supports 2GB-32GB
VOL down button, VOLRESET
Speaker
Turning on/off
To turn on the device, press and hold [ ] for 3 seconds (3s)
To turn off the device, press and hold [ ] for 5s, then select Power
off from the pop up menu
Standby Mode: When powered on, press the Power key to enter
the device into standby mode. Press the button again to exit standby
mode.
When exiting first powering on the device, or returning from standby
7
Loading...