How it Works
SHUOYING
Loading...
P1805R
Users Manual
44 pgs610.27 Kb0

SHUOYING P1805R Users Manual

Contents
1. Appearance………………………………………………………………………2
2. Getting started……………………………………………………………………2
3. Inputting…………………………………………………………………………8
4. Desktop …………………………………………………………………………9
5. Browsing web pages……………………………………………………………15
6. Typical applications……………………………………………………………15
7. Tips and other information……………………………………………………24
8. Customized settings……………………………………………………………29
9. Using HDMI……………………………………………………………………39
10. Locking the device……………………………………………………………40
11. Troubleshooting………………………………………………………………40
1
1.Appearance
Production structure:
2. Getting started
Note: Our Company spares no efforts to improve the product quality. Therefore, if there is any difference between the delivered product and the contents of the User’s Guide because of the upgrading of the software, the former shall prevail. Thank you for your understanding in this respect!
2.1 Charging the battery
A battery is embedded in the handheld PC, which should be charged whenever the
2
power is low. Power adapter: To charge the battery, insert one end adapter into the outlet and the other end into the power jack on the device.
1. After the adapter is inserted, the battery indicator will turn red, which means
the charging is in process. When the battery is fully charged, the indicator will turn green. At the time, you should unplug the adapter, while the indicator still remains green.
2. You can also use the handheld PC when the battery in it is being charged. Note: It takes longer to charge the battery fully when the PC with the battery is powered on.
2.2 Using a SD card
Inserting SD card: Place the SD card into the groove and press it with a finger till you hear a sound of “click”. At the time, the information on the left corner of the screen says: “SD card being prepared.” Viewing the files in the SD card: When you run the File Browser, all files under the root directory of the card will be displayed. At the time, you can choose “SD card 1” to open the contents in the card. Removing the SD card:
3
First close all files already opened from the card. Then click the menu, and select Setup →SD card’s memory→SD card 1→Uninstall SD card. At the time, the system indicates that “the SD card has been safely removed ”. After that, press the card gently to allow it to project one part of it, and hold that part to pull out the whole card. Then the screen will indicate that “SD card was removed.” Note:
1. Insert the SD card properly. Otherwise, it may damage the card.
2. Do not pull out the card before the screen indicates “ uninstall SD card”. Otherwise, it may damage the card.
3. It is suggested that the memory cards of the major brands in the market be used so that the cards can be compatible with the device.
2.3 Hot plug of SD card and external flash disk
Do not hot plug the SD card and external flash disk when they are being used or their contents are browsed. If, in such software as My Video, My Music and My Photo, the files in the SD card and external flash disk are being used or browsed, and the card or the disk is pulled out directly, it may damage them, and the program may exits for self protection. For details of plugging and unplugging the card, please refer to the part “2.2--Using the SD card”. Before you remove the external flash disk, you must close all its files being used.
2.4 Memory space
The device has three memory spaces: Internal memory, flash disk and SD card. The
4
internal memory of the device won’t be displayed. The folders of SD card are displayed as “SD card 1” and “SD card 2”. The folders of external flash disk are displayed as “Flash Disk 1” and “Flash Disk 2”. The system memory can only be used for storing the system files, with a capacity of 2GB. The capacity of the SD card and the external flash disk is subject to the device itself. The system can support an SD card of 32GB at maximum. For details of the memory, please refer to the part “8.6—SD card and device’s memory”
2.5 Power-on/off
1. Power-on: When the battery is fully charged, press the power switch for two seconds to power on the device. At the time, the device will vibrate once. After powered on, the system will enter the screen-locking interface, where you can move up the unlocking icon to enter the main interface and down to the icon of electronic photo frame to enter the interface where you can play the pictures.
2. Power-off: Press the power switch for four seconds, and the system will pop up a interface for confirmation. Click the power-off icon at the bottom of the screen, and the device will be turned off. At the time, it will vibrate once. Move up the power-off icon, the system will return to the power-off interface.
3. Sleeping mode: Press the power switch for one second, and the system will enter the sleeping mode, in which the LCD screen will turn black. In this mode, you can press any key to wake up the system. Once waken up, the system enters the
5
screen-locking interface. To save energy, if the electricity is insufficient in the sleeping mode, the system can power off itself after it is automatically powered on.
2.6 Vibration
Power-on vibration: Click the setup icon the shortcut bar, and select settings for the voice and display mode. Then select the check box behind the
“tactile feedback” and the vibration function is enabled.
Power-off vibration: In vibration mode, you can click the icon on the shortcut bar, and select settings for the voice and display mode. Then select the
check box behind the “tactile feedback” and the vibration function is disabled.
2.7 Turning interface
The interface can be turned at times when the direction of the device changes. When you hold the device in a vertical way, the interface will show the contents in a vertical way too. When horizontal, the interface stands horizontal too. The screen can turn within two seconds and restore the previous state after refreshing.
2.8 External network cable and flash disk External network cable
Connect an adapter box to the flat handheld PC and insert the network cable into the port of Ethernet. Once logged in, the system will automatically obtain an IP address for network access. Network access can also be realized through manual
6
setups. External flash disk: Connect an adapter box to the flat handheld PC and insert the flash disk into the USB port. Once it is properly connected, you can save and copy contents between the device and the PC.
2.9 Network connection
Cable network: After you insert the network cable into the port designed for Ethernet on the adapter box connected to the PC, the icon “ETH” will appear on status bar at the top of the screen. Then the device will obtain the IP address automatically to access to the network. Network access can also be realized through manual setups. Wireless network: 1．Move leftward the WI-FI switch at the upper right part of the device to be in the ON state; 2．Select the icon “setup” under the shortcut bar on the desktop; 3．Select “wireless network” in the setup menu; 4．Open WI-FI through the check box behind it; 5．Select “WI-FI setup” to set the WI-FI network;
6. All APs found by the device will be listed. You can click the AP name to be connected;
7. If the connection is successful before the AP, the information of AP will be saved.
7
To start connecting, select “connect” in the popped-up window. To eliminate the AP information, select “forget”;
8. If AP is not encrypted, you can select “connect” in the popped-up window to start connecting;
9. If AP is encrypted, you should enter the password in the popped-up window and then click “connect” to start connecting;
10. If the connection is successful, an icon indicating the successful connection will appear on the transfer bar at the top of the desktop.
3. Inputting
3.1 Keyboard
When you need to input the programs or files made up of texts and digits, the touch keyboard will appear on the screen. Note: The device is compatible with USB keyboard. However, a USB keyboard is connected to the device, some keys may become ineffective.
3.2 Touch screen
The touch screen can sense the movement of the finger, through which you can perform the operations below: Note: Never attempt to place objects onto the touch screen, with which the screen can be scratched or damaged. Click: Click the icon or option you select; Long press: You can long press the icon to select you desired option, or drag the
8
icon to the shortcut bar at the bottom of the desktop; Drag: You can drag the icons to change their positions on the desktop or between pages, or move the application icons to the shortcut bar You can also use a pen rather than you finger to operate the touch screen.
3.3 Mouse The device is compatible with external mouse. After a mouse is connected, you can use the mouse for such operations as clicking, selecting, dragging, sliding or for right clicking to pop up the menu.
4. Desktop
4.1 Status bar
At the upmost part of the screen is the status bar, at the left of which is one software button and right are five. The buttons are defined as Home, Prt Sc, Vol- and Vol +, Menu AND Back. A the status bar other information is also indicated, such as the strength of 3G and of WI-FI signals, the state of Ethernet and battery and the time.
4.2 Home page The home page of Feichu Flat Handheld PC consists of two modes: Gadget Mode and Icon Mode. The two modes can be switched through the button at the middle of the shortcut bar. The interface of Gadget Mode is shown in the picture below:
9
To enter the interface of application icons, click the button at the shortcut bar, as shown below:
10
To enter the interface of Gadget Mode, click .
4.3 Shortcut mode
In the major interface of the Gadget Mode, you can press the menu button or click the icon Menu at the status bar. Then the shortcut menu icons will appear, which are Add, Wallpaper, Search, Notification, Desktop Setting and System Setting, as shown below:
11
4.4 Shortcut way to add gadgets
1. Shortcut mode
To add a shortcut mode of an application to the desktop, press Menu→Add→Shortcut in the Gadget mode interface. Once added, you can click the shortcut icon to perform the related operations.
12
2. Widgets
To add the widgets to the major screen, press Menu→Add→Widgets in the gadget mode interface. And then select the widget you want to add. Once added, you can click the shortcut icon to perform the related operations.
13
4.5 Using gadgets
The user can add, delete and install the gadgets, add and delete application icons, and move the icons. You can also drag the icons between the operation areas or between operation area and shortcut bar. In the desktop gadget interface, long press the gadget icon, and a small square graphic and a recycling bin icon at the middle of the shortcut bar will be popped up. Drag the recycling bin icon to any place on the desktop, or drag it to the recycling bin to delete it.
14
Loading...
+ 30 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use