Pixelstrip 40 V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Order code: 44502
MANUAL
ENGLISH
1
Order code: 44502
Pixelstrip 40
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 3
Rigging ............................................................................................................................................................................ 4
Return Procedure .......................................................................................................................................................... 5
Claims .............................................................................................................................................................................. 5
Description of the Device ................................................................................................................................................ 6
Overview ........................................................................................................................................................................ 6
Installation ........................................................................................................................................................................... 7
Setup and Operation ........................................................................................................................................................ 7
Connecting Multiple Pixelstrips ................................................................................................................................... 7
Connecting the Pixelstrip to the Pixel Controller .................................................................................................... 7
How To Make a Data Cable....................................................................................................................................... 8
Software for controlling ............................................................................................................................................... 8
Data Cabling ................................................................................................................................................................. 8
Maintenance ...................................................................................................................................................................... 9
Troubleshooting ................................................................................................................................................................. 9
No Light ........................................................................................................................................................................... 9
Product Specifications ....................................................................................................................................................10
2
Order code: 44502
Pixelstrip 40
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture will be returned in the original factory box and
packing.
Your shipment includes:
● Showtec Pixelstrip 40
● CAT-5 data cable (1,3 m)
● User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
● be qualified
● follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
3
Order code: 44502
Pixelstrip 40
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
● Never remove warning or informative labels from the unit.
● Never leave any cables lying around.
● Never place any material over the LEDs.
● Never look directly into the light source.
● Never use the device during thunderstorms, unplug the device immediately.
● Do not switch the device on and off in short intervals, as this will reduce the device’s life.
● Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
● Do not open the device and do not modify the device.
● Do not shake the device. Avoid brute force when installing or operating the device.
● Only use the device indoors, avoid contact with water or other liquids.
● Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
● Only operate the device after having familiarized with its functions.
● Avoid flames and do not put close to flammable liquids or gases.
● Always keep the housing closed while operating.
● Always allow a free air space of at least 50 cm around the unit for ventilation.
● Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the data cable holding it by the plug. Never pull out the plug by tugging the data cable.
● Make sure that the device is not exposed to extreme heat, moisture or dust.
● If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
● If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
● If the LEDs are obviously damaged, they need to be replaced to prevent their functions from being
impaired, due to cracks or deep scratches.
● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
● For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
● The user is responsible for correct positioning and operating of the Pixelstrip. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
● This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.
Operating Determinations
● This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
● The minimum distance between light output and the illuminated surface must be bigger than
1 meter.
● In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely
disconnect from power source via breaker or by unplugging.
● The maximum ambient temperature ta = 40 °C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
● If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
● Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
4
Order code: 44502
Pixelstrip 40
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Improper installation can cause serious injuries and/or damage of property!
Fig. 01
The Pixelstrip 40 can be mounted to any kind of truss with a clamp.
5
Order code: 44502
Pixelstrip 40
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the
fixture. Be prepared to provide the model number, serial number and a brief description of the cause for
the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.
6
Order code: 44502
Pixelstrip 40
Description of the Device
Features
The Pixelstrip 40 is designed to be operated with the Pixel Controller.
● Light source: 40 x SMD5050 RGB LEDs (0,3 W)
● Pixel pitch: 25 mm
● Maximum cable length: 10 m (CAT-5/CAT-6) from the Pixel Controller to the Pixelstrip
● Maximum output length: 4 m per output/16 m per Pixel Controller
● Connections: RJ45 connectors IN/OUT
● Front cover: Black frosted
● Housing: Metal
● Color: Black
● IP rating: IP20
● Operating temperature: From -5 °C to +40 °C
● Dimensions: 1000 x 37 x 100 mm (LxWxH)
● Weight: 1,3 kg
The Pixelstrip 40 is designed to be operated together with the Pixel Controller.
Note: The Pixelstrip 40 is delivered without the Pixel Controller. You need to purchase it separately.
44501 – Pixelstrip 20 (50 cm)
44510 – Pixel Controller
Optional accessories
44503 – Acrylic Flat Cover Milky for Pixelstrip 40
44505 – Acrylic Dome Cover White for Pixelstrip 40
Overview
Fig. 02
01) 40 x SMD5050 RGB LEDs (0,3 W)
02) Safety eye
03) RJ45 data connector IN
04) Adjustment screw
05) Mounting bracket with inclination screw
06) RJ45 data connector OUT
07) Connection bracket
7
Order code: 44502
Pixelstrip 40
Installation
Remove all packing materials from the Pixelstrip 40. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Setup and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Connecting Multiple Pixelstrips
01) Place multiple Pixelstrips next to each other.
02) Loosen the adjustment screws on the connection bracket (07).
03) Connect the Pixelstrips and slide the connection bracket (07) onto the rail on the next Pixelstrip.
04) Tighten the adjustment screws on the connection bracket (07).
Fig. 03
Connecting the Pixelstrip to the Pixel Controller
In order to connect the Pixelstrip to the Pixel Controller, follow the directions and examples from the user
manual of the Pixel Controller (44510).
The maximum length of your setup must not exceed 16 meters per controller (max. 4 meters per
output)!
It is possible to combine the Pixelstrip 20 (44501) and the Pixelstrip 40 (44502), if the 4-meter setup
length limit is observed.
8
Order code: 44502
Pixelstrip 40
How To Make a Data Cable
A standard ETHERNET cable can be used to replace the data cable required to transmit the data.
Please follow the instructions below in order to create an extra network cable.
Take a standard network cable (CAT-5/ 5E /6) and connect it to the RJ45 connector, as shown in Fig. 04.
The wires should now be colored as follows:
Fig. 04
Software for controlling
In combination with Arkaos or DMT Software, you are able to play videos over the Pixel Controller.
You only have to connect all the Pixelstrips and run your software.
50180
Arkaos LED Master
An all-in-one solution to run LED light shows for everyone.
Originally designed around KlingNet, this fast and easy
application will take your LED show to the next level.
102101
Arkaos Media Master Express 5.0
The latest update of the successful media server software.
102201
Arkaos Media Master Pro 5.0
PRO DMX video software for lighting designers.
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio PC Interface Cables
● CAT-5 cable 7,6 mm Matte blue PVC. Order code FL55150 (1,5 m), FL553 (3 m), FL556 (6 m),
FL5510 (10 m), FL5515 (15 m), FL5520 (20 m).
● CAT-6 cable (recommended for best data transfer). Order code FL563 (3 m), FL566 (6 m),
FL5610 (10 m), FL5615 (15 m), FL5640 (40 m).
9
Order code: 44502
Pixelstrip 40
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01) All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) The electric power supply cables must not show any damages or material fatigue.
The Pixelstrip 40 requires almost no maintenance. However, you should keep the unit clean. Disconnect
the mains power supply, and then wipe the housing with a damp cloth. Do not immerse in liquid. Do not
use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the data connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the Pixelstrip does not operate properly, refer servicing to a technician.
Suspect three potential problem areas as: the power supply, the LEDs and the controller.
01) Power supply. Check if the Pixel Controller is plugged into an appropriate power supply.
02) The LEDs. Return the device to your Showtec dealer.
03) The controller. Refer to the user manual of the Pixel Controller.
04) If all of the above appears to be O.K., plug the unit in again.
05) If you are unable to determine the cause of the problem, do not open the Pixelstrip, as this may
damage the unit and the warranty will become void.
06) Return the device to your Showtec dealer.
10
Order code: 44502
Pixelstrip 40
Product Specifications
Model:
Showtec Pixelstrip 40
Dimensions:
1000 x 37 x 100 mm (LxWxH)
Weight:
1,3 kg
Light source:
40 x SMD5050 RGB LEDs (0,3 W)
Pixel pitch:
25 mm
Maximum cable length:
10 m (CAT-5/CAT-6) from the Pixel Controller to the
Pixelstrip
Maximum output length:
4 m per output/16 m per Pixel Controller
Connections:
RJ45 connectors IN/OUT
Front cover:
Black frosted
Housing:
Metal
Color:
Black
IP rating:
IP20
Max. ambient temperature ta:
From -5 °C to +40 °C
Max. housing temperature tB:
70 °C
Minimum distance:
Minimum distance from flammable surfaces:
0,5 m
Minimum distance to lighted object:
1 m
Design and product specifications are subject to change without prior notice.
Website: www.Showtec.info
Email: service@highlite.com
©2020 Showtec
Loading...