SHOWTEC Pixel Bar COB 8*15W RGB User Manual
Pixel Bar, COB 8*15W RGB
User Manual
Our COB light offers many possibilities to achieve very nice laser effects which you want. It is specially designed
for the stages, disco, night clubs and etc. Please read the manual before operation.
A. SPECIFICATION
1. Voltage: AC 100V/240V, 50Hz/60Hz
2. Power consumption: 120W
3. Current: 1.7A@110V, 0.8A@240V
4. LED: COB 8*15W RGB
5. Beam angle: 55 degree
6. Operation mode: LED display
7. Working environment: -10~40℃
8. DMX channels: 2,3, 5, 6, 12, 24CH
9. Working mode: DMX mode, master/slave mode, built-in programs mode, auto running mode, static color,
sound-active mode
10. Lumen: R 300lux@2m
G 340lux@2m
B 410lux@2m
RGB 1050lux@2m
11. Power linking: 4pcs@110V, 9pcs@240V
B. OPERATION
This series of product has rich effect programs, there are six working mode:
·built-in programs
·auto running
·sound-active
·DMX mode
·master/slave mode
·static color
1. Built-in Programs Mode
1) Press the “MODE”, enter into built-in programs mode menu “ ”;
Press the “UP” or “DOWN”, select the operation programs effect “ ~ ”.
2) Press the “SETUP”, enter into the programs operation speed menu “ ”;
Press the “UP” or “DOWN”, to set the speed value “ ~ (SP100)”.
3) Press the “SETUP”, enter to set the programs operation strobe menu “ ”;
Press the “UP” or “DOWN”, set the strobe value “ ~ (FS100)”.
2. Auto Running Mode
1) Press the “MODE”, enter auto running mode menu “ ”.
2) Press the “SETUP”, enter into the speed menu of auto running programs“ ”;
Press the “UP” or “DOWN”, to set the speed value “ ~ (SP100)”.
3) Press the “SETUP”, enter into strobe menu of auto running programs “ ”;
Press the “UP” or “DOWN”, to set the strobe value “ ~ (FS100)”.
4) Press the “SETUP”, enter into the auto running programs operation time menu “ ”;
Press the “UP” or “DOWN”, set the auto running programs operation time value “ ~ ”.
3. Sound-active Mode
1) Press the “MODE”, enter into sound-active mode “ ”;
2) Press the “UP” or “DOWN”, to set the sound-active sensitivity value “ – ”.
4. DMX Mode
1) Press the “MODE”, enter auto running mode menu “ ”.
2) Press the “UP” or “DOWN”, set the DMX address value ~ .
3) Press the “SETUP”, enter to set the DMX working mode menu “ ”.
4) Press the “UP” or “DOWN” select the DMX working mode , , , , , .
DMX mode 1:
CH1
CH2
NO.
Value
FUNCTION
1 0 OFF
--
2
1—7 R 3
8—15
RG
4
16—23
G
5
24—31
GB
6
32—39
B
7
40—47
RB
8
48—55
RGB
9
56—63
PROGRAM01
SPEED
0—255
10
64—71
PROGRAM02
11
72—79
PROGRAM03
12
80—87
PROGRAM04
13
88—95
PROGRAM05
14
96—103
PROGRAM06
15
104—111
PROGRAM07
16
112—119
PROGRAM08
Loading...