SHOWTEC Phantom 575 Pro EB,Phantom 575 Pro EB v2 Product Manual
Phantom 575 Pro EB V2
ORDERCODE 40184
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Phantom brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
1
2
2
4
4
5
5
6
6
7
7
7
8
8
9
9
10
10
10
11
11
12
13
13
14
14
17
21
22
22
22
23
23
24
24
24
24
26
Showtec
Showtec Phantom™ Product Guide
Warning.................................................................................…...……………..…………………………….………….
Safety-instructions……………………………………………………………………………………………………….
Operating Determinations.……………………………………………………………………………………………
Rigging.……………………………………………………………………………………………………………………
Return Procedure……………………………………………………………………………......................................
Claims…………………………………………………………………………….........................................................
Description...............................................................................…...………………………………………….…………
Features and Overview ………………………………...….……………….………….……….……….…………….
Backside…………………………………………………...…...….……………….…………………...………………..
Installation...............................................................................…...…………………………………………………..…
Installing the Lamp ........................................................…………………………………………………….………
Lamp Adjustment.….......................................................………………………………………..………………….
Lock / Unlock the Moving-head.................................………………………………………..……………………
Set Up and Operation.............................................................................................................................................
One / Multiple Phantom DMX Control......................................………………………………………………….
DMX-Protocol…...................................................………………………………………………………………………..
Fixture Linking…………………............……..……………………………………..…………………..…………..…..
Data Cabling……………….........……..……………………………………………..………………………….…….
Control Panel….............……....................................………………………………………………………………..
Control Mode........................................………………………………………………………………………………
MENU OVERVIEW ……..……………………………………..…………………………………….…….……….….....
Control panel functions...................................………………………………………………………………………
DMX addressing...................................……………………………………………………………………………….
DMX Channels…………………………………………………………………………………………………………..
23 Channels (BASIC) ……………………………………………………………………………………………..
38 Channels (ADVANCED)…….………………………………………………………………………………..
Channel settings………………………………………………………………………………………………………...
Maintenance...................................................................................………..………….…….……………………..….
Changing the Lamp........................................................................…………………….………………...………
Replacing the Fuse........................................................................…………………….…………………………..
Replacing a Gobo from the Rotating Gobo-wheel …..............................…….……….……………………..
Gobo Orientation...............................................................…………………….…………………………………..
Colorwheel 1, Static Gobowheel, Rotating Gobowheel……………….……………………………………….
Troubleshooting............................................................................………………….………………….………………
No Light, No Movement - All Products............................................………………….………………………….
No Response to DMX ....................................................................………………….…………………………….
Product Specifications.................................................................……………….…….………………………………
2
WARNING
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• Showtec Phantom 575 Pro with powercon cable 1,5m
• Quick-lock brackets and M10 nuts
•User manual
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
- be qualified
- follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never run the device without lamp!
Never ignite the lamp if the objective-lens or any housing-cover is open, as discharge lamps may
expose and emit a high ultraviolet radiation, which may cause burns.
3
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.
Always hold the fixture at the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Never unscrew the screws of the rotating gobo, as the ball bearing will otherwise be opened.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always replace the lamp, when it is damaged or deformed due to the heat.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used, before cleaning or when
replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the
power-cord.
To ensure the longest and most efficient use of the lamp always wait 15 minutes before re-
applying power after a shutdown. Failure to do so could result in premature aging of the lamp
and failure to the electronics that drive it.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due
to cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Movinghead must be installed out of the reach of children. Never leave the
unit running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use lamps and fuses of same type and rating only.
Replace the lamp if it becomes defective or worn out, or before usage exceeds the maximum
service life.
Allow the fixture to cool down for 15 minutes, before opening the fixture and replacing lamp.
Protect your hands and eyes with gloves and safety glasses.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
4
OPERATING DETERMINATIONS
• This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• The minimum distance between light-output and the illuminated surface must be more than 1 meter.
• The maximum ambient temperature ta = 45°C must never be exceeded.
• If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
• Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be
used.
Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Phantom can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Mounting a clamp to the underside of the Phantom moving head
Improper installation can cause serious damage to people and property !
5
Connection with the mains
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Make sure that the device is always connected properly to the earth!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
6
Description of the device
Features
The Showtec Phantom 575 Pro is a moving-head with high output and great effects.
• 23/38 DMX-control channels required
• Stylish housing
• Sharp optics
• Automatic Pan/Tilt correction
• Colourwheel 2 with 6 vivid colours, 2 color correction filters + white
• Interchangeable colors
• Static Gobowheel with 7 static gobos and open
• Rotating Gobowheel with 6 rotating gobos and open
• Interchangeable Gobosystem
• Gobo Shake Function
• DMX-control via standard DMX-controller
• Seamless Zoom (13-27 degrees)
• Iris 0-100%
• CMY Color mixing
• Animation Wheel
• Built in Macro's via DMX
• DMX Focus
• 3 and 5 pin XLR connectors
• rotating 3-facet prism
• Bright LCD display
• User selectable pan/tilt ranges
• Basic(23CH) or Advanced (38CH) operating modes
• Lamp on/off via DMX
• Electronic Ballast
• Mounting System: Quick-lock brackets and M10 nuts
• Mechanical Dimmer/Shutter/Strobe
• Strobe-effect with adjustable speed (1 - 10 flashes/sec.)
• Pan 0º -- 540º
• Tilt 0º -- 270º
• Lamp HMI 575 (ordercode 80901O)
• Fuse T7A / 250V
Overview 1
Fig. 1
1) Lens
7
Backside 2 3 4
Fig. 2
5 6 7 8 9 10 11
2) DMX signal connector (IN) 5-pin
3) DMX signal connector (OUT) 5-pin
4) Fuse 7A
5) Menu Buttons
6) LCD Display
7) DMX LED
8) DMX signal connector (IN) 3-pin
9) DMX signal connector (OUT) 3-pin
10) Powercon
10) ON / OFF
Installation
Installing the Lamp
The Showtec Phantom uses the HMI 575 (ordercode 80901O) bulb as manufactured by all popular
manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure :
1. Loosen the 4 screws (W, X, Y, Z) on the back of the housing.
2. Gently tilt the head so the small metal housing will slide out more easy.
3. Read lamp instructions. Do not touch the lamp bulb glass. (See Figure 3.)
Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean, lint-free
towel and rubbing alcohol.).
4. Insert the lamp into the small bracket in the lamp socket. You can adjust the distance between the
lamp and the lens by turning the 4 screws (A, B, C, D) on the back of the cover.
5. Put the lamp cover back and fasten the screws snugly.
1 2 3 4 5
Fig. 3
Loading...