ShowTec Performer 2000 Fresnel DDT MKII User manual
Performer 2000 Fresnel DDT MKII V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: 33036
MANUAL
ENGLISH
1
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Table of contents
Warning ............................................................................................................................................................................... 3
Safety Instructions ......................................................................................................................................................... 3
Operating Determinations .......................................................................................................................................... 5
Rigging ............................................................................................................................................................................ 5
Connection with the mains......................................................................................................................................... 6
Return Procedure .......................................................................................................................................................... 7
Claims .............................................................................................................................................................................. 7
Description of the device ................................................................................................................................................ 8
Features .......................................................................................................................................................................... 8
Overview ........................................................................................................................................................................ 8
Backside .......................................................................................................................................................................10
Installation .........................................................................................................................................................................11
Set Up and Operation ....................................................................................................................................................11
Color frame retaining clip .........................................................................................................................................11
Setting the angle ........................................................................................................................................................12
Control Modes .............................................................................................................................................................13
One Performer (Stand-alone) ...............................................................................................................................13
Multiple Performers (Master/Slave control) ........................................................................................................13
Multiple Performers (DMX Control) .......................................................................................................................14
Fixture Linking ...............................................................................................................................................................15
Data Cabling ...............................................................................................................................................................15
Control Panel ...............................................................................................................................................................16
Control Mode ..............................................................................................................................................................16
DMX Addressing ..........................................................................................................................................................16
Menu Overview ...........................................................................................................................................................17
Main Menu Options ....................................................................................................................................................18
1. Static Color ...........................................................................................................................................................18
2. Run Mode ..............................................................................................................................................................19
3.Power Mode ..........................................................................................................................................................19
4. Address ..................................................................................................................................................................19
5. Motor Mode ..........................................................................................................................................................19
6. Setting ....................................................................................................................................................................20
6.1. Safety Key ..........................................................................................................................................................20
6.2. Dimmer Speed ..................................................................................................................................................20
6.3. Dimming Curve Settings ..................................................................................................................................20
6.4. Performance Settings ......................................................................................................................................21
6.5. Settings Menu Safety Lock ..............................................................................................................................21
6.6. DMX Channel Modes ......................................................................................................................................21
6.7. Save DMX/Blackout .........................................................................................................................................21
6.8. Reset Settings ....................................................................................................................................................21
6.9. Mode Setting .....................................................................................................................................................21
6.10. Refresh Rate ....................................................................................................................................................22
7. Calibration ............................................................................................................................................................22
8. Info ..........................................................................................................................................................................22
DMX Channels .............................................................................................................................................................23
1 Channel (UNO) .....................................................................................................................................................23
2 Channels (DOS) ....................................................................................................................................................23
3 Channels (STD.P) ...................................................................................................................................................23
Cleaning ............................................................................................................................................................................24
Cleaning the glass lens ..............................................................................................................................................24
Maintenance ...................................................................................................................................................................24
Replacing the Fuse .....................................................................................................................................................24
2
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Troubleshooting ...............................................................................................................................................................25
No Light .........................................................................................................................................................................25
No Response to DMX..................................................................................................................................................25
Product Specifications ....................................................................................................................................................27
Dimensions ........................................................................................................................................................................28
Notes ..................................................................................................................................................................................29
3
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
● Showtec Performer 2000 Fresnel DDT MKII
● 1 Powercon power cable 1,5m
● 1 color frame
● 1 safety cable
● User manual
●
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
4
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
● Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
● Never modify, bend, mechanically strain, put pressure on, pull or heat up the power cord.
● Never strain the cable insert or the female part in the device. There must always be sufficient cable
going to the device. Otherwise, the cable will be damaged, which can cause serious damage.
● Never remove warning or informative labels from the unit.
● Never use anything to cover the ground contact.
● Never lift the device holding it by the projector-head, as the mechanics may be damaged. Always
hold the device by the transport handles.
● Never place any material over the LEDs or lens.
● In case of rotating gobos: Never loosen the screws of the rotating gobo otherwise you risk opening of
the ball bearing.
● Never look directly into the light source.
● Never leave any cables lying around.
● Never use the device during thunderstorms, unplug the device immediately.
● Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach, as they are potential sources of danger.
● Never use a LED strip in sealed or hot places.
● Always mount a LED strip on aluminum or metal surface, for best heat dissipation.
● Do not insert objects into air vents.
● Do not open the device and do not modify the device.
● Do not connect this device to a dimmer pack.
● Do not switch the device on and off in short intervals, as this will reduce the device’s life.
● Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the device to cool for at least 5 minutes before handling.
● Do not shake the device. Avoid brute force when installing or operating the device.
● Only use the device indoors, avoid contact with water or other liquids (only applies to devices with
IP<=65).
● Only operate the device after having checked if the housing is firmly closed and all screws are tightly
fastened.
● Only operate the device after having familiarized with its functions.
● Avoid flames and do not put close to flammable liquids or gases.
● Always keep the case closed while operating.
● Always allow a free air space of at least 50 cm around the unit for ventilation.
● Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
● Make sure that the device is not exposed to extreme heat, moisture or dust.
● Make sure that the available voltage is not higher than stated on the rear panel.
● Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
● Make sure that the core diameter of extension cords and power cords is sufficient for the required
power consumption of the device.
● If the lens or LEDs are obviously damaged, it has to be replaced to prevent its functions from being
impaired, due to cracks or deep scratches.
5
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
● If the external cable is damaged, it has to be replaced by a qualified technician.
● If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
● If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
● For adult use only. The device must be installed beyond the reach of children. Never leave the unit
running unattended.
● Never attempt to bypass the thermostatic switch or fuses.
● For replacement use fuses of same type and rating only.
● The user is responsible for correct positioning and operating of the device. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
● This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.
● Note: WARRANTY on batteries is only 6 months after date of purchase.
● When your battery remains flat after fully charging or it doesn’t function or doesn’t charge anymore,
you can order a new battery. The spare part number for the battery is on request.
Operating Determinations
● This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
● The minimum distance between light output and the illuminated surface must be bigger than 1
meter. (This distance may differ depending on the model. The exact minimum distance will be
mentioned in the corresponding manual.)
● To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
● The maximum ambient temperature t
a
= 40°C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
● If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
● Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
6
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Procedure:
● If the device is lowered from the ceiling or high joists, professional trussing systems have to be used.
● Use a clamp to mount the device, with the mounting bracket, to the trussing system.
● The device must never be fixed swinging freely in the room.
● The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
● When rigging, derigging or servicing the device, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
The device can be mounted to any kind of truss with a clamp.
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE
GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!
7
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the
fixture. Be prepared to provide the model number, serial number and a brief description of the cause for
the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.
8
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Description of the device
Features
The Showtec Performer 2000 Fresnel DDT MKII is a theater spotlight fixture with high output and great
effects.
Input voltage: 100-240V AC, 60/50Hz
Light source: 1x 250W CITIZEN LED
Power consumption: 200W
Light output: 9506 Lumen
Peak intensity: 145415cd
Color rendering: >90Ra
Color temperature: 6285K
Dimmer: 0-100%
Dim curve: Dimm4 technology, 4 presets
Strobe: 0-20Hz
Motorized zoom: 13-41º
Field angle: 25°-76°
Control modes: Stand-alone, Master/Slave, DMX -512
Connections: 3-pin/5-pin XLR signal connectors IN/OUT, PowerCON power connectors IN/OUT
Refresh rate: 600Hz-25000Hz
Power linking: 3 units @ 120V; 6 units @ 240V
DMX channels: 1, 2, 5 channels
Extremely quiet
Housing: Die-cast aluminum & flame-retardant plastic
Cooling: Internal fan
IP rating: IP20
Fuse: T3,15AL/250V
Dimensions: 380 x 286 x 392 mm (LxWxH)
Weight: 6,6 kg
Overview
Fig. 01
9
Ordercode: 33036
Performer 2000 Fresnel DDT MKII
Fig. 02
01) Front cap
02) Front lens cover
03) Lens tube
04) Front plate
05) Top cover
06) Adjustment screw
07) Mounting bracket with inclination screw
08) Heat-sink bracket
09) Lens plate
10) Lens frame
11) Collecting lens
12) LED board
13) Thermal switch holder
14) Cooling fan
15) Cooling fan frame
16) Air intake grill
17) Motor
18) Motor frame
19) PCB
20) Rear plate
21) Rear cover
22) Transmission belt
23) Focus bracket
24) Focus bracket support
25) Screw shaft
26) Bottom cover
27) Power supply
28) Lens filter
Loading...