SHOWTEC LED Wall Wash Product Manual

LED Wall Wash

ORDERCODE 41210

Congratulations!

You have bought a great, innovative product from Showtec.
The Showtec LED Wall Wash brings excitement to any venue. Whether you want simple plug-&-play
action or a sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]

You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !

Thank you!

1

2
2
3
3

4
4
4
5

5

5
6
6

7
7
7
7
8
9

10

11
11

12
12

13

Showtec

Showtec LED Wall Wash™ Product Guide

Warning.................................................................................…...……………..…………………………….………..…..

Safety-instructions………………………………………………………………………………………………………….

Operating Determinations.………………………………………………………………………………………………
Rigging.………………………………………………………………………………………………………………………

Description...............................................................................…...………………………………………….………..….

Features…….……………………………………………………………………………………….…………………....…

Overview…………………………………………………………………………………………………………………….
Backside……………………………………………………………………………………………………………………..

Installation...............................................................................…...…………………………………….…………………

Set Up and Operation.....................................................................……..………………………………………………

One LED Wall Wash.................................................................................……………………………………………

Multiple LED Wall Washes……..........................................................................…………………………………….

DMX-Protocol…...................................................…………………………………………………………………….……

Control Modes........................................……………………………………………………………………………….

Stand – alone mode.............................………………………………………………………………………….

Sound-Control mode............................………………………………………………………………………….

DMX mode.............................................………………………………………………………………………….

Control Panel….............……....................................………………………………………………….………………

DMX Channels.....................................…………………………………………………………………………………

Maintenance...................................................................................………..………….…….……………………….….

Replacing the Fuse........................................................................…………………….…………………………….

Troubleshooting............................................................................………………….………………….………………...

No Response to DMX ....................................................................………………….………………………..……..

Product Specifications.................................................................……………….…….…………………………………

2

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

- be qualified

- follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to
warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non­observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.
Never leave any cables lying around.
Do not open the device and do not modify the device.
Do not connect this device to a dimmerpack.
Do not shake the device. Avoid brute force when installing or operating the device.
Do not switch the device on and off in short intervals, as this would reduce the system’s life.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only

handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. The device must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use fuses of same type and rating only.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

3

OPERATING DETERMINATIONS

If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.

You endanger your own safety and the safety of others!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.

Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !

Procedure:

If the LED Wall Wash is lowered from the ceiling or high joists, professional trussing systems have to

be used.

The LED Wall Wash must never be fixed swinging freely in the room.

The installation must always be secured with a safety attachment, e.g. an appropriate safety net

or safety-cable.

When rigging, derigging or servicing the LED Wall Wash, always make sure, that the area below

the installation place is blocked and staying in the area is forbidden.

Connection with the mains

Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

Pin

L

BROWN

RED

YELLOW/COPPER

FASE

N

BLUE

BLACK

SILVER

NUL

YELLOW/GREEN

GREEN

GREEN

EARTH

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property !