Connection with the mains......................................................................................................................................... 5
Description of the device ................................................................................................................................................. 7
Set Up and Operation .....................................................................................................................................................13
Switching Off ................................................................................................................................................................13
Declaration of Conformity .............................................................................................................................................15
The FX Ice Jet is leaking .............................................................................................................................................16
Only a small smoke plume is visible when the CO2 gas exits the FX Ice Jet ...................................................16
No white smoke plume visible when the CO2 gas exits the FX Ice Jet.............................................................16
Troubleshooting does not provide the solution ....................................................................................................16
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
● Showtec FX Ice Jet with IEC power cable (1,5 m)
● User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
● be authorized
● follow the instructions of this manual
● We also insist that all new users (operators, installers, maintenance workers and cleaners) receive a
training course during which they become thoroughly familiarized with this user manual.
2
Ordercode: 61000
FX Ice Jet
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit and, on regular basis, make sure that they
remain clearly visible and legible.
Never place any material over the cannon tube.
Never look directly into the cannon tube.
Never leave any cables lying around.
Do not expose the device to any source of vibration.
Do not insert objects into the cannon tube.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation.
Do not remove or disable the safety devices.
Do not shake the device. Avoid brute force when installing or operating the device.
Use the device ONLY if there ARE NOT ANY people, animals or other objects in the direction of the
output within the output range. The shooting direction is the direction in which the output pipe on
the FX Ice Jet is pointed. The output distance depends on the humidity in the air! The higher the
humidity, the longer the output distance.
Only use the device indoors, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that all the required safety devices are in good condition and function properly.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the cannon tube is obviously damaged, it needs to be replaced, so that its functions are not
impaired.
If the device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Device must be installed out of the reach of children and unauthorized persons.
Never leave the unit running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
Provide sufficient lighting of the surroundings.
3
Ordercode: 61000
FX Ice Jet
We presume that you, your employees and others who come into contact with the FX Ice
Jet are familiar with how the machine must be dealt with. This includes the correct use,
maintenance and repair of the FX Ice Jet as described in this user manual. The employees
should be familiar with the use of machines through training and/or experience.
The user is responsible for correct positioning and operating of the FX Ice Jet. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
● The maximum ambient temperature ta = 30°C must never be exceeded.
● Do not expose this device to relative humidity degree higher than 75%.
● Do not expose this device to any source of vibration.
● Operate the device in a reasonably stable temperature of between 0 and 30ºC
● If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●If any unauthorized alterations or repairments are performed on the device, the warranty becomes
void.
●Any operation different to the ones described in this manual may lead to dangers like frostbite,
short-circuit, burns, electric shock, crash etc.
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
● If the FX Ice Jet is lowered from the ceiling or high joists, professional trussing systems have to be used.
● Use a clamp to mount the FX Ice Jet, with the mounting-bracket, to the trussing system.
● The FX Ice Jet must never be fixed swinging freely in the room.
● The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
●When rigging, derigging or servicing the FX Ice Jet, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious damage to people and property !
4
Ordercode: 61000
FX Ice Jet
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Showtec excludes liability for unsafe situations, accidents and damage that are the result of:
● Disregard for the warnings or regulations as set out on the FX Ice Jet or in this manual.
● Use for other purposes or under other circumstances than those set out in this documentation.
● Alterations to the FX Ice Jet. This also includes the use of replacement parts other than the original
ones.
● Insufficient maintenance.
● Unauthorised removal of safety caps and/or safeguards.
● Incompetent operation of the machine.
Showtec is not liable for any consequential loss in the event of an FX Ice Jet breakdown.
This user manual has been drawn up with the utmost care. Showtec cannot be held responsible for any
mistakes made in this publication or for any consequences thereof.
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
5
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.