SHOWTEC DimMaster, DimMaster 6 Product Manual
DimMaster
ORDERCODE 50378
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec DimMaster brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
Showtec
Showtec DimMaster™ Product Guide
Warning..…...................................................................................………………………………………….
Safety-instructions………………………………………………………………………………………….….
Operating Determinations…………………………………………………………………………………….
Description..…..............................................................................……….…………………………………
Backside…….……………………………………………………………………………………….……...….
Harting Connector – Pin Connection………………………………………………….……………………..
Installation...............................................................................…...…………………………………….…..
Installing DimMaster ....................................................……………………………….……..……………
Set Up and Operation.....................................................................……..…………………………………
Menu System….…….......................................................................……….…………………………….
- Set DMX Address.……….....................................................................................……………….
- Set Channel.……….......................................................................................................………...
- Set Scenes………...............................................................................................……..………....
- Test Channels............................................................................................……………………....
- Set Inputs.................................................................................................................……............
- Unit Set Up.....................................................................................................................……......
- Set Text......................................................................................................................………......
- Software Rev................................................................................................................…...........
- Read Info.......................................................................................................................………...
2
2
3
4
5
7
8
8
8
8
9
10
12
15
15
15
15
16
16
Additional Information............................................................................................................................
Maintenance...................................................................................………..………….…….……………...
Replacing the Fuse........................................................................…………………….…………………
Troubleshooting............................................................................………………….………………….…..
Product Specifications.................................................................……………….…….………………….
18
19
19
19
20
1
WARNING
CAUTION!
Keep this device away from rain and moisture!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
- be qualified
- follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before your initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the device.
• Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
• Provide occasional ventilation during use.
• Place this unit in a stable location, away from humidity, vibration or bumps.
• Never remove warning or informative labels from the unit.
• Do not insert objects into air vents.
• Do not switch the device on and off in short intervals, as this would reduce the system’s life.
• Do not open the device.
• Only use device indoor, avoid contact with water or other liquids.
• Avoid flames and do not put close to flammable liquids or gases.
• Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
• In case of a malfunction (burning smell, etc.), immediately stop operation, disconnect power and
contact your Showtec dealer.
2
•
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
•
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
•
(preferably in the original packing material), and return it to your Showtec dealer for service.
• For replacement use fuses of same type and rating only.
• This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, explosion, crash etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
3
Description of the device
Features
• 6 Channel DMX 512 Dimmingpack, 6x16A
• Inductive and resistant load
• DMX connector by 3p XLR
• 6 DMX channels, 24 map in DMX channels
• 24 programmable scenes
• 10 shows from 24 programmed scenes
• 90 built-in chase programs
• Each channel can be programmed with preheat level(0-20%), maximum output level(30-100%),
control curve(linear, square and switch) and fade time(0.0s-999s).
• Each scene can be programmed with the current output and fade time
• 24 map in DMX channels can be preset mapped to any of 10 scenes, 10 shows and 90 chase programs.
• DMX only and Map only can be selectable
• Several units can be linked in Master/Slave mode
• Switch off protection in the event of over temperature
• LCD display
• Power failure memory
Overview
1) Circuit Breaker 16A
2) LCD Display: Shows the current activities or adjustments of menus
3) UP Button: Scroll through the menus or increase the values.
4) DOWN Button: Scroll through the menus or decrease the values.
5) YES Button: Enter a submenu or store the settings.
6) NO Button: Leave the settings unchanged or go back one level of the menus.
Fig. 1
4
There are 3 versions from the DimMaster: Standard version ordercode 50378
Ilme 16 Pole Multipin-version ordercode 50378M
Schuko-version ordercode 50378S
Rear Panel
7) DMX In: 3-pin XLR male, used to receive DMX data.
8) Analog Din
9) DMX Out: 3-pin XLR female, used to transmit DMX data.
10) Terminal Outputs
11) Power Input: Single phase input or three-phase input
Fig. 2
(For details, please refer to the wiring diagram printed on the top cover (also see Page 6).
Dim-Master 6 (2 x 16 p. multiconnectors)
Ordercode 50378-M
Dim-Master 6 (6 x Schuko connectors)
Ordercode 50378-S
Fig. 3
5
Loading...