SHOWTEC Aircone Q6 WDMX User Manual
Aircone Q6 WDMX V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: 40314
MANUAL
ENGLISH
1
Ordercode: 40314
Aircone Q6 WDMX
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Rigging ............................................................................................................................................................................ 4
Connection with the mains......................................................................................................................................... 5
Return Procedure .......................................................................................................................................................... 6
Claims .............................................................................................................................................................................. 6
Description of the device ................................................................................................................................................. 7
Features .......................................................................................................................................................................... 7
Overview ........................................................................................................................................................................ 7
Installation ........................................................................................................................................................................... 8
Set Up and Operation ....................................................................................................................................................... 8
Cone Installation ........................................................................................................................................................... 8
Wireless DMX Control ................................................................................................................................................... 9
Transmitter/Receiver Mode Selection ................................................................................................................... 9
Transmitter Mode ....................................................................................................................................................... 9
Receiver Mode ........................................................................................................................................................... 9
Control Modes .............................................................................................................................................................10
One Aircone (Auto, Built-in programs and Manual) .........................................................................................10
One Aircone (Sound-controlled) ..........................................................................................................................10
Multiple Aircones (Master/Slave control) ............................................................................................................10
Multiple Aircones (DMX Control) ..........................................................................................................................11
Fixture Linking ...............................................................................................................................................................12
Data Cabling ...............................................................................................................................................................12
Control Panel ...............................................................................................................................................................13
Control Mode ..............................................................................................................................................................13
DMX Addressing ..........................................................................................................................................................13
Menu Overview ...........................................................................................................................................................14
Main Menu Options ....................................................................................................................................................15
1. Auto ........................................................................................................................................................................15
2. Built-in programs ..................................................................................................................................................15
3. Manual (Static Colors) ........................................................................................................................................16
4. Sound-controlled .................................................................................................................................................16
5. DMX-512 ................................................................................................................................................................16
6. Master/Slave .........................................................................................................................................................16
7. Settings ...................................................................................................................................................................16
7.1. Dimming Curves................................................................................................................................................17
7.2. Fan Speed ..........................................................................................................................................................17
7.3. DMX Failure ........................................................................................................................................................17
7.4. Reset Settings ....................................................................................................................................................17
DMX Channels .............................................................................................................................................................18
3 channels (3.b) .......................................................................................................................................................18
6 channels (6.A) .......................................................................................................................................................18
6 channels (6.C) .......................................................................................................................................................20
12 channels (12.F) ....................................................................................................................................................20
Maintenance ....................................................................................................................................................................22
Replacing the Fuse .....................................................................................................................................................22
Troubleshooting ...............................................................................................................................................................23
No Light .........................................................................................................................................................................23
No Response to DMX..................................................................................................................................................23
Product Specifications ....................................................................................................................................................25
Dimensions ........................................................................................................................................................................26
2
Ordercode: 40314
Aircone Q6 WDMX
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec Aircone Q6 WDMX
1 x cone with Velcro
PowerCON power cable (1,5 m)
2 x quick-lock brackets for truss mounting
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
3
Ordercode: 40314
Aircone Q6 WDMX
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
• Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
• Never place any material over the lens.
• Never look directly into the light source.
• Never leave any cables lying around.
• Do not insert objects into air vents.
• Do not connect this device to a dimmer pack.
• Do not switch the device on and off in short intervals, as this will reduce the device’s life.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Only use the device indoors, avoid contact with water or other liquids.
• Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
• Only operate the device after having familiarized with its functions.
• Avoid flames and do not put close to flammable liquids or gases.
• Always keep the case closed while operating.
• Always allow a free air space of at least 50 cm around the unit for ventilation.
• Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
• Make sure that the device is not exposed to extreme heat, moisture or dust.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
• If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
• For adult use only. The device must be installed beyond the reach of children. Never leave the unit
running unattended.
• Never attempt to bypass the thermostatic switch or fuses.
• For replacement use fuses of same type and rating only.
• The user is responsible for correct positioning and operating of the Aircone. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
• This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
4
Ordercode: 40314
Aircone Q6 WDMX
Operating Determinations
• This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
• To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
• The maximum ambient temperature t
a
= 40°C must never be exceeded.
• The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
• If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
• Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
• If the Aircone is lowered from the ceiling or high joists, professional trussing systems have to be used.
• Use a clamp to mount the Aircone, with the mounting bracket, to the trussing system.
• The Aircone must never be fixed swinging freely in the room.
• The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
• When rigging, derigging or servicing the Aircone, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
5
Ordercode: 40314
Aircone Q6 WDMX
The Aircone can be placed on a flat stage floor or mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!
6
Ordercode: 40314
Aircone Q6 WDMX
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.
7
Ordercode: 40314
Aircone Q6 WDMX
Description of the device
Features
The Aircone Q6 WDMX is equipped with 6x 8W Q6 RGBWA-UV LEDs and can be controlled by means of
wireless DMX (WDMX Sweden protocol). It is possible to adjust the fan speed. The Aircone Q6 WDMX is the
ultimate decorative light effect, suitable for a wide range of venues, such as: festivals, stages, weddings,
corporate events and theme parks.
Input voltage: 100-240V AC, 50/60Hz
Power consumption: 160W
Light source: 6 x 8W RGBWA-UV LEDs
DMX channels: 3, 6, 6, 12 channels
4-digit LED display
Control modes: Auto, Built-in programs, Static Colors, Sound, Slave, DMX
Control protocol: DMX-512, WDMX
Dimmer: 0-100%
Strobe: 0-20Hz
Connections: 3-pin XLR data connectors IN/OUT, PowerCON power connector IN/OUT
IP rating: IP-20
Housing: Aluminum
Color: Black
Cone length: 2500 mm
Fuse: T2AL/250V
Dimensions: 470 x 150 mm (WxH)
Weight: 11 kg
Optional accessories
40315 – Separate cone for the Aircone Q6 WDMX
40316 – Separate pyramid cone for the Aircone Q6 WDMX
Overview
Fig. 01
01) 100-240V PowerCON power connector Blue IN
02) 100-240V PowerCON power connector Grey OUT
03) Fuse T2AL/250V
04) 3-pin DMX signal connector OUT
05) 3-pin DMX signal connector IN
06) LED display + control buttons
07) Function button
08) Built-in microphone
09) Wireless DMX LED indicator
10) Power switch ON/OFF
11) Velcro strip
12) Wireless DMX antenna
13) 6 x 8W RGBWA-UV LEDs
14) Air exhaust
8
Ordercode: 40314
Aircone Q6 WDMX
Installation
Remove all packing materials from the Aircone Q6 WDMX. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Cone Installation
Fig. 02
Attach the Velcro strip on the cone to the Velcro strip on the edge of the Aircone.
Loading...