SHOWTEC 60449 User Manual
Mirrorball Motor DMX 2 channel V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: 60449
MANUAL
ENGLISH
Ordercode: 60499
Mirrorball Motor DMX 2 channel
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Rigging ............................................................................................................................................................................ 4
Connection with the mains......................................................................................................................................... 5
Return Procedure .......................................................................................................................................................... 6
Claims .............................................................................................................................................................................. 6
Description of the device ................................................................................................................................................. 7
Features .......................................................................................................................................................................... 7
Frontside.......................................................................................................................................................................... 7
Backside ......................................................................................................................................................................... 8
Installation ........................................................................................................................................................................... 8
Set Up and Operation ....................................................................................................................................................... 8
Control Modes ............................................................................................................................................................... 9
One Mirrorball Motor (Stand-alone)....................................................................................................................... 9
Multiple Mirrorball Motors (Master / Slave Control) ............................................................................................. 9
Multiple Mirrorball Motors (DMX control) .............................................................................................................10
Fixture Linking ...............................................................................................................................................................12
Data Cabling ...............................................................................................................................................................12
DMX Channels .............................................................................................................................................................12
2 Channels ................................................................................................................................................................12
Maintenance ....................................................................................................................................................................13
Troubleshooting ...............................................................................................................................................................13
No Light .........................................................................................................................................................................13
Product Specifications ....................................................................................................................................................14
1
Ordercode: 60499
Mirrorball Motor DMX 2 channel
Your shipment includes:
Showtec Mirrorball Motor DMX 2 channel
User manual
be qualified
follow the instructions of this manual
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
2
Ordercode: 60499
Mirrorball Motor DMX 2 channel
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit. Do not open the device and do not
modify the device.
Never use anything to cover the ground contact.
Never look directly into the light source. Never leave any cables lying around.
Never use the device during thunderstorms, unplug the device immediately. Never look directly
into the light source.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoors, avoid contact with water or other liquids.
Only operate the fixture after having checked if the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions. Avoid flames and do not put
close to flammable liquids or gases.
Always disconnect power from the mains, when device is not used, before cleaning or when
replacing lamp! Only handle the power cord by the plug. Never pull out the plug by tugging the
power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust. Make sure that the
available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the external cable is damaged, it has to be replaced by a qualified technician.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. The Mirrorball Motor must be installed out of the reach of children. Never leave
the unit running unattended.
The user is responsible for correct positioning and operating of the Mirrorball Motor. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this mirror ball control system.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
3
Ordercode: 60499
Mirrorball Motor DMX 2 channel
Operating Determinations
• This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
• The maximum ambient temperature t
• The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
• If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
• Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
= 40°C must never be exceeded.
a
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
• If the device is lowered from the ceiling or high joists, professional trussing systems have to be used.
• Use a clamp to mount the device, with the mounting bracket, to the trussing system.
• The device must never be fixed swinging freely in the room.
• The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
• When rigging, derigging or servicing the projector, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
Improper installation can cause serious injuries and/or damage of property!
4
Loading...