ShoreTel IP 230 INSTALLATION INSTRUCTIONS

ShoreTel 230 IP Phone

Quick Install Guide & Warranty

Document and Software Copyrights

Copyright © 1998–2006 by ShoreTel, Inc., Sunnyvale, California, U.S.A. All rights reserved.
Printed in the United States of America. Contents of this publication may not be reproduced or
transmitted in any form or by any means, electronic or mechanical, for any purpose, without
prior written authorization of ShoreTel, Inc.

ShoreTel, Inc. reserves the right to make changes without notice to the specifications and
materials contained herein and shall not be responsible for any damage (including
consequential) caused by reliance on the materials presented, including, but not limited to,
typographical, arithmetic, or listing errors.

Trademarks

ShoreCare, ShoreWare and ShoreGear are registered trademarks of ShoreTel, Inc. in the United
States and/or other countries. ShoreTel, ShoreTel 6, ShorePhone, Office Anywhere and ShoreTel
Smart are trademarks of ShoreTel, Inc. in the United States and/or other countries.

Microsoft, Windows, Windows NT, and ActiveX are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries. VxWorks is a trademark
of Wind River Systems. All other copyrights and trademarks herein are the property of their
respective owners.

Version Information

PN 800-1045-02
ShoreTel IP230 Quick Install Guide & Warranty
Date: February 28, 2006

Company Information

ShoreTel, Inc.
960 Stewart Drive
Sunnyvale, California 94085

Phone: [phone] OR from within United States 1-800-425-9385
Fax: [phone]

www.shoretel.com

Installing Your ShoreTel 230 IP Phone

This section shows how to install a ShoreTel 230 IP Phone. Instructions are provided
for connecting phones with and without the AC power adapter. (This adapter may be
necessary for networks that do not support the IEEE 802.3af standard for Power-over­Ethernet).

Package Contents

ShoreTel 230 IP Phone

Vinyl overlay with inter­national symbols (for
Function Keys)

Phone base

Handset & handset cord

Quick Install Guide

Network cable (7-foot)

AC Power Adapter Package (Optional)

Power-over-Ethernet adapter and
power cord

Additional network cable (7-foot)

3

1 Attach phone to base

Insert the large tab on the mount into
the slot on the rear of the phone.

Rotate the two pillars down until the

ba

smaller tabs slide into the slots.

4