ShoreLand'r SSBK1172 User Manual

®

SSBK1172

Rear Ramp Kit for the BK2200U

Assembly Instructions:

Mount the rear ramp weldments (Ref.#3) to the rear of your
BK2200U trailer frame using two (2) 9/16” X 3-1/4” hex bolts
(Ref.#6). Secure with two (2) 9/16” hex lock nuts (Ref.#10).
Refer to the parts drawing on page two (2) for placement.
Secure the rear ramp weldments to the center weldments on
the frame using the pin (Ref.#4) provided. Secure with 3/16”
X 1” cotter keys (Ref.#11).

Mount the gate straps (Ref.#2) to the BK2200U trailer frame
using a 3/16” X 1-1/4” lynch pin (Ref.#4).

Insert the ramp pin (Ref.#12) into the side of the rear ramp
weldments and secure with 1/2” lock washers (Ref.#7) and
1/2” hex nuts (Ref.#9). Secure the gate straps to the ramp
pins just installed (with the ramp weldments an upright posi­tion) using 3/16” X 1-1/4” lynch pins.

The rear ramp weldments can be used as single ramps (left
and right) or used a full ramp. Using the full ramp option,
insert the utility ramp bushing (Ref.#1) between the two (2)
ramps (refer to parts drawing on page two (2).) Secure the
bushing with one (1) 1/2” X 4-1/2” hex bolt (Ref.#5) and 1/2”
flange lock nut (Ref.#8).

Tighten all fasteners before using or towing.

Midwest Industries, Inc. Ida Grove, IA 51445 [phone] www.shorelandr.com 0003151