®
SRV46TB-03, SRV46TB-13,SRV46TB-14, SRV46TB-18, & SRV46TB-22
SRV46TB-03
69082 Literature Bag - Brakes - Trailers
4610072 Spring, 5-Leaf
8050003 Frame Bundle
*ST185/80R13C Tire w/Dir Rim
68356 Hdwe Bag - Bulk Parts
SRV46TB-13
69082 Literature Bag - Brakes - Trailers
4610072 Spring, 5-Leaf
8050013 Frame Bundle
*ST185/80R13C Tire w/Dir Rim
68356 Hdwe Bag - Bulk Parts
SRV46TB-14
69082 Literature Bag - Brakes - Trailers
4610072 Spring, 5-Leaf
8050014 Frame Bundle
*ST185/80R13C Tire w/Dir Rim
68356 Hdwe Bag - Bulk Parts
SRV46TB-18
69082 Literature Bag - Brakes - Trailers
4610072 Spring, 5-Leaf
8050018 Frame Bundle
*ST185/80R13C Tire w/Dir Rim
68356 Hdwe Bag - Bulk Parts
SRV46TB-22
69082 Literature Bag - Brakes - Trailers
4610072 Spring, 5-Leaf
8050022 Frame Bundle
*ST185/80R13C Tire w/Dir Rim
68356 Hdwe Bag - Bulk Parts
*Check with your dealer/customer service representative for current tire/rim assembly part number.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 1 REV B 4/24/06
ShoreLand’r offers their product line a painted finish. When ordering
parts it is important that you specify the finish or color you have on
your product. The five (5) digit number along with a two (2) digit space
_ _, note the parts which can be purchased with various finishes.
When ordering these items use the five (5) digit number along with
a two (2) digit suffix for the proper finish.
03 .........Black
13 .........Green
14 .........Blue
18 .........Galv. w/Pearl White Plastic Parts
22 .........Red
SRV46TB Specifications
Capacity 4600 lbs.
GVWR: 5920 lbs.
GAWR: 2960 lbs.
Ship Wt: 915 lbs.
Frm Size: 2X4 (11 Ga.)
Tire Size: ST185X80R13C
Rim Size: 14 X 6 “J”
Brake: Surge Hydraulic
Coupler: 2” Actuator, 6000 lbs.
Safety Chain: 6,000 lbs.
Suspension: 5 Leaf Hook Springs
Tongue Size: 3X5X65” Swing Tongue
Table of Contents
Frame Drawing & Bill of Materials .........................................2-3
Swing Tongue, Actuator, Safety Chain (Disc) ........................4
Profile 2000 Winch / Jack Drawing & BOM ...........................5
Axle Assembly Dwg / BOM (Disc) .........................................6-7
More Information ...................................................................8-9
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 2 REV B 4/24/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 3 REV B 4/24/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 4 REV B 4/24/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 5 REV B 4/24/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 6 REV B 4/24/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 7 REV B 4/24/06
Dealer / Distributor:
Remove all parts banded or taped to the frame
assembly. Locate the bulk hardware and sort according to size.
Tongue:
Slide tongue into the tongue cap on the front of the
trailer, align holes and insert ½” x 4” hex bolt through
the through tongue cap and secure with ½” flange
lock nut.
Pull wires from the rear of tongue and feed them thru
the tongue cover, slide the tongue cover over the
brake line tube that extends from the rear of tongue.
Align the hole in the tongue cover, the tongue, and
the frame cap insert a ½” x 1-½” hex bolt and secure
with a ½” flat washer and a ½” flange lock nut.
Plug harnesses from the tongue into the matching
color harness that extends from each side frame;
slide the excess wire back into the tongue. Very
carefully form the brake lines that extends from the
tongue and right side frame until they are aligned
remove the plug and cap and screw the two together. Tighten line securely.
Safety Chains:
Take a ½” x 5” hex bolt slide on a ½” flat washer
and one (1) of the safety chains; insert the bolt into
the hole on the actuator housing through tongue
and out other side. Place the second safety chain
on the bolt followed with a ½” flat washer and secure with a ½” flange lock nut.
Bunk Assembly:
Place the pre-assembled bunks on the preset bunk
brackets and secure with a 3/8” x 1” hex bolt and
secure with a 3/8” flange lock nut. Repeat at each
bunk bracket location.
Springs/axles:
Mount springs on axle by aligning the stub bolt on
the leaf springs with the hole in the center of the
spring pad on the axle, place a spring clamp on top
of the leaf spring. Slide two (2) ½” x 2-5/16” x 6-½”
square u-bolts over the springs and spring clamp,
slide a spring/axle u-bolt pad over the threaded
ends of the u-bolts and secure with ½” flange lock
nuts. Repeat on other side of axle and on other
axle.
Place axle with the brakes to the rear of the trailer,
slide a spring bushing into the rear loop on the
spring bracket and insert a 9/16” x 3-¼” hex bolt
from the outside in and secure with a 9/16” lock nut.
Repeat on other side of trailer. Slide the hook end
of the spring over the bushing and swing the axle
up so the hole in the front of the leaf spring aligns
with the rear hole in the rocker, insert 9/16” x 3-¼”
hex bolt and secure with 9/16” lock nut. Repeat
on other side. To mount the front non brake axle,
insert a spring bushing into the front of the rocker
and align with the hole, insert a 9/16” x 3-¼” hex
bolt and secure with a 9/16” lock nut. Repeat on
the other side. Swing axle into place so the front
of the leaf spring aligns with the hole in the front
loop on the spring bracket and insert a 9/16” x 3¼” hex bolt from the outside in and secure with a
9/16” lock nut. Repeat on other side.
Remove plug from right side caliper and insert
brake hose assembly securely, place the other
end of the hose into the clip on the spring bracket
and secure with the hose clip. Carefully uncoil the
brake line and insert into the hose.
Rockers:
Remove all parts from bag, insert the bushings
into the hole and slide the rocker into the center
bracket on the spring bracket, making sure that
the grease zerk points toward the ground, insert a
¾” x 4 ½” hex bolt from the outside in. Secure with
a ¾” lock nut. Repeat process on other side.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 8 REV B 4/24/06
Tire Size and Carrying Capacity Chart
Tire Size .....................ST185/80R13-C
GVWR ........................2960 LB.
Carrying Capacity .......4600 LB.
Axle ............................Single Brake - Standard
Consumer/ Owner:
Your SeaRay trailer is designed, assembled and
pre-adjusted to fit your boat. If properly maintained
it will give your boat maximum support and many
years of care free service.
Refer to the tire side wall for correct tire pressure.
Tire And Wheel Assemblies
Mount the tire and wheel assemblies using the 1/2”
fine threaded tapered lug nuts provided. Tighten
to 80-90 ft/lb. of torque using the rotation pattern
as shown in the ShoreLandr’s Owners Manual.
Re-torque the lug nuts after 50 miles of driving and
then periodically thereafter.
Brakes:
Refer to the Brake Service Manual for brake
bleeding procedures, service and maintenance.
Follow these instructions before using your trailer:
Read your ShoreLand’r Owner’s Guide and all
safety decals on the trailer.
Wash and wax your trailer regularly. Always rinse
your trailer after each use, especially when boating in salt or brackish water.
The law requires that the white ground wire on
both the trailer wire harness and the vehicle harness be properly grounded.
Re-check all fasteners for tighteness before towing.
Contact your authorized ShoreLand’r dealer if
you experience a problem with your trailer. To locate a dealer, please use www.shorelandr.com
- dealer locator feature.
For further information or assistance, contact
ShoreLand’r at 1-800-859-3028 or visit www.
shorelandr.com.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 9 REV B 4/24/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003243
Page 10 REV B 4/24/06
Loading...