ShoreLand'r SLXR30BSW User Manual V.2
®
SLXR30BSW
SLXR30BSW Bundles Required:
4300238 ST215/75R14C MR Tire/TS Dir Rim ...........2
(or)
4300239 ST215/75R14C MR Tire/Galv Dir Rim ........ 2
66520 Bag with Chains, No Coupler .....................1
62340 Literature Bag - Trailers ..............................1
80330-- Frame Bundle - 2X4W XR30BSW .............1
66996-- Tongue Assembly 55”, W/UFP Actuator .....1
ShoreLand’r offers their product line in either galvanized or
painted finish. When ordering parts it is important that you
specify the finish or color you have on your product. The five
(5) digit number along with a two (2) digit space _ _, note the
parts which can be purchased with various finishes. When
ordering these items use the five (5) digit number along with
a two (2) digit suffix for the proper finish.
00 .........Galvanized
01 .........Arctic White
03 .........Black
33 .........Galvanized w/Black Plastic Parts
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003431
Page 1
Table of Contents: Page
Frame Drawing & Bill of Materials ................................2-3
XR Assembly Instructions ............................................. 3
Tongue & Safety Chain Dwg/BOM. ..............................4
Safety Instructions ........................................................ 5
Tongue & Safety Chain Assy Instr. ...............................5
White Ground Wire/Brakeline Assy Instr ......................5
Profile 2000 Winch Dwg/BOM/Assy Instr. ...................6-7
Tire Size & Carrying Capacity Chart ............................. 8
Chassis Drawing & Bill of Materials ..............................8-9
Spring Assembly Instructions .......................................9
Axle Assembly Instructions ........................................... 9
One Axle Brake Installation Instr ..................................9
Tire & Wheel Assembly ................................................10
Trailer Adjustments ....................................................... 10
Axle Adjustments ..........................................................10
Rear Support System Adjustment ................................10
Roller Adjustment .........................................................10
Front Roller Support Adjustment ..................................10
Winch Post Adjustments ............................................... 10
Diagram A
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003431
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove parts
and sort by size.
XR SERIES
The XR-series roller rack is installed by placing the roller
arm assembly mounting channel over the rear cross member and securing in place with a 1/2” x 4-1/2” hex bolt and
lock nut. (See Diagram A). Note that it should be left loose
until the boat is placed on the trailer. Once the proper positions is determined, it may be tightened. Repeat on the other
roller arm assembly.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Diagram A).
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003431
Page 3
Loading...