Shop fox D4033 User Manual

Model D4033

Shop Fox Drill Press Table

Instruction Sheet

Phone #: [phone] • Online Tech Support: [e-mail] • Web: www.shopfox.biz

Damage to your eyes, lungs, and ears could result
from using a drill press without protective gear,
such as safety glasses, a respirator, and hearing
protection.

Specifications

Size ................................. 23 3⁄4" W x 11 7⁄8" D x 3" T

Aluminum Insert T-Slots ........................................2

Wooden T-Slots ..................................................1

Weight ..................................................10

Construction ...........................Melamine-Coated MDF

Color ........................................................White

1

⁄2 lbs.

Inventory (Refer to Figures 1 & 2) Qty

Table ..............................................................1

Fence .............................................................1

Fence Stop .......................................................1

Knobs .............................................................5

Clamp Assemblies ...............................................2

Fence

Stop

Figure 1. Drill press fitted with Model

D4033 drill press table.

Clamp Assembly

Figure 2. Installed table.

Knob

Fence

Table

Installation

1. File down any nicks or burrs in the drill press table,

clean the surface, then wipe a very light coat of
machine oil on the table to prevent rust should any
condensation occur.

2. Place the Model D4033 table onto the drill press
table, align the clamps as shown in Figure 2, then
snug them in place.

COPYRIGHT © JUNE, 2010 BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China#12963JB

D4033 Drill Press Table Instructions

1

2

3

4

5

6

7

8

8

10

11

12

13

14

15

16

17

REF PART # DESCRIPTION

1 XD4033001 CLAMP BAR
2 XD4033002 TAPE SCALE
3 XD4033003 KNOB
4 XD4033004 TABLE INSERT
5 XPW01M FLAT WASHER 8MM
6 XD4033006 HOLDDOWN
7 XD4033007 STUD
8 XPFH39 FLAT HEAD SCR 6-32 X 7/16
10 XD4033010 THREADED FLANGE
11 XD4033011 T-SLOT BOLT M8-1.25 X 75
12 XD4033012 T-SLOT BOLT M8-1.25 X 35
13 XD4033013 KNOB M8-1.25
14 XD4033014 TABLE
15 XD4033015 STOP BLOCK
16 XD4033016 FENCE
17 XD4033017 T-TRACK

Operation

• Periodically verify the mounting clamps are snug,
and never overtighten the hand knobs.

• To avoid drilling into the table, make sure that the
drill press depth stop and drill bit alignment are
correct.

• Use the table only in dry environments.

• Wipe down workpieces to ensure they are free of
debris that may scratch the table.

• Remove the center plate (#4 in Parts) from the table
if you need to perform a through-drilling operation.

Maintenance and Care

• Keep your cast iron drill table and column rust­free with regular applications of a high-quality rust
preventive product.

Parts

• To avoid condensation and rust between the two
tables, do not leave the Model D4033 table mounted
on the drill press table for long periods of time.

• Clean the Model D4033 drill press table by
vacuuming out T-slots when finished and wiping
down the table and fence with any good household
glass cleaner. Periodically lightly oil the hand knob
threads and the studs.

-2-