Shop fox D3272 User Manual

INTRODUCTION
The SHOP FOX®Regulator/Filter/Lubricator (
Figure 1)
is great for controlling air pressure, trapping moisture, cleaning pneumatic systems, and lubricating tools.
SETUP
The Model D3272 accepts 1⁄4" NPT threads. Mount the regulator as close as possible to the air tools. Moisture will drain when the airline is not pressurized, so do not mount in a moisture sensitive location. See
Figure 2
for
airline connection information.
Remove oil fill cap and fill lubrication cup to max oil level.
ADJUSTMENT
The Model D3272 features a locking adjustment knob. Pull the knob up to adjust the pressure, and push the knob down to lock the adjustment knob in place.
DO
NOT adjust the regulator over 150 PSI!
Adjust the needle valve clockwise to decrease lubrication flow and counterclockwise to increase lubrication flow.
MAINTENANCE
Always drain the collection cup if moisture reaches the max. drain level. This can be done in two ways: 1) Depressurize the airline; 2) Push the drain valve up.
Unscrew the collection cup and clean with a clean dry cloth as needed.
Avoid using solvents or cleaners
that would be hazardous to the cup material!
CUSTOMER SERVICE
For questions contact Woodstock International Technical Support at (360) 734-3482, or send e-mail to: tech-support@shopfox.biz.
Figure 2. Typical airline layout, showing
placement of the regulator.
Instruction Sheet
Model D3272
Regulator/Filter/Lubricator
Air Hose
Air Hose
1
4'' NPT
Model D3272
Compressor
Air Tool
AIRFLOW
1
4'' NPT Male
Quick Coupler
1
4'' NPT
Female Nipple
Figure 1. Model D3272.
COPYRIGHT © BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
SEPTEMBER 2003, PRINTED IN CHINA.
Pressure
Gauge
Adjustment
Knob
Max. Drain
Level
Drain Valve
Needle Valve
Oil Fill Cap
Wall Mount
Filter
(Inside Cup)
Max.Oil
Level
1
4" NPT
D3272 Parts Diagram
REF PART # DESCRIPTION
1 XD3272001 O-RING 2 XD3272002 STEEL BALL 3 XD3272003 THIN SPRING 4 XD3271013 O-RING 5 XD3272005 AIR SCREW CAP 6 XD3271021 O-RING 7 XD3272007 INNER SLEEVE I 8 XD3271027 OUTER SLEEVE 9 XD3271028 COLLAR
REF PART # DESCRIPTION
10 XPN04M HEX NUT 4MM 11 XD3272011 PLUG 12 XD3272012 RUBBER TUBE 13 XD3271012 SEAT 14 XD3271014 PRESSURE ADJ. POLE 15 XD3271015 O-RING 16 XD3271016 HALF O-RING 17 XD3271017 FILTER COVER 18 XD3271018 FILTER WEB 19 XD3271019 SPRING 20 XD3271020 FILTER SET 21 XD3271022 EMIT WATER PIN 22 XD3271023 O-RING 23 XD3271024 EMIT WATER SPRING 24 XD3271025 EMIT WATER SEAT 25 XD3271026 O-RING 26 XD3271029 OUTER SLEEVE II 27 XD3271030 EMIT WATER NUT 28 XPEC02M E-RING 4MM 29 XD3271001 PRESSURE ADJ. REVOLVER 30 XD3271002 REVOLVER SEAT 31 XD3271003 SCREW CAP ADJ. 32 XD3271006 BOLD ADJ. 33 XD3271007 COMPRESSED SPRING 34 XD3271008 SEALING WASHER (YX) 35 XD3271009 PISTON 36 XD3271010 RECTANGLE WASHER 37 XD3271011 RECTANGLE WASHER 38 XD3272038 SPEC. CAP SCREW M4 X 40 39 XD3272039 OIL ADJ. BOLT 40 XD3272040 NIP BLOCK 41 XD3272041 O-RING 42 XD3272042 SCREW CAP 43 XD3272043 O-RING 44 XD3272044 OIL SEALING COVER 45 XD3272045 O-RING 46 XD3272046 OIL SEALING CORE 47 XD3272047 O-SEALING RING 48 XD3272048 OIL SEAT 49 XD3272049 RECTANGLE WASHER 50 XD3272050 SPECIAL SET SCREW 10MM 51 XD3272051 BAROMETER
51
50
32
33
34
29
30 31
21
22
23
24 25
8
9
26
27
28
35
36
37
13
4
14
15
16
17
18 19
20
6
10
11
12
38 39
40
41
2
1
4
42
43
44 45
46
22 47
48
49
3
4
5
6
9
1
2
7 8
Loading...