INTRODUCTION
The SHOP FOX®Air Regulator w/Filter (Figure
1
)
is great for controlling air pressure, trapping
moisture and cleaning air in pneumatic systems.
SETUP
The Model D3271 accepts 1⁄4" NPT threads. Mount the
regulator as close as possible to the air tools. Keep in
mind that water will drain from the collection cup
when the airline is not pressurized, so do not mount
in a moisture sensitive location. See
Figure 2
for
airline connection information.
ADJUSTMENT
The Model D3271 features a locking adjustment knob.
Pull the knob up to adjust the pressure, and push the
knob down to lock the adjustment knob in place.
DO
NOT adjust the regulator over 150 PSI!
MAINTENANCE
Always drain the collection cup if moisture reaches
the max. drain level. This can be done in two ways:
1) Depressurize the airline; 2) Push the drain valve
up.
Unscrew the collection cup and clean with a clean dry
cloth as needed.
Avoid using solvents or cleaners
that would be hazardous to the cup material!
CUSTOMER SERVICE
For questions contact Woodstock International
Technical Support at (360) 734-3482, or send email to: tech-support@shopfox.biz.
Figure 2. Typical airline layout, showing
placement of the regulator.
Instruction Sheet
Model D3271
Air Regulator w/Filter
Air Hose
Air Hose
1
⁄4'' NPT
Lubricator
(Optional)
Model D3271
1
⁄4'' NPT Male
Quick Coupler
1
⁄4'' NPT
Female Nipple
Compressor
Air Tool
AIRFLOW
Figure 1. Model D3271.
COPYRIGHT © BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
SEPTEMBER 2003, PRINTED IN CHINA.
Pressure
Gauge
Adjustment
Knob
Max. Drain
Level
Drain Valve
Filter
(Inside Cup)
1
⁄4" NPT
1
⁄4" NPT
D3271 Parts Diagram
REF PART # DESCRIPTION
1 XD3271001 PRESSURE ADJ. REVOLVER
2 XD3271002 REVOLVER SEAT
3 XD3271003 SCREW CAP ADJ.
4 XD3271004 BAROMETER
5 XD3271005 SPECIAL SET SCREW 10MM
6 XD3271006 BOLT ADJ.
7 XD3271007 COMPRESSED SPRING
8 XD3271008 SEALING WASHER (YX)
9 XD3271009 PISTON
10 XD3271010 RECTANGLE WASHER
11 XD3271011 RECTANGLE WASHER
12 XD3271012 SEAT
13 XD3271013 O-RING
14 XD3271014 PRESSURE ADJ. POLE
15 XD3271015 O-RING
16 XD3271016 HALF O-RING
REF PART # DESCRIPTION
17 XD3271017 FILTER COVER
18 XD3271018 FILTER WEB
19 XD3271019 SPRING
20 XD3271020 FILTER SET
21 XD3271021 O-RING
22 XD3271022 EMIT WATER PIN
23 XD3271023 O-RING
24 XD3271024 EMIT WATER SPRING
25 XD3271025 EMIT WATER SEAT
26 XD3271026 O-RING
27 XD3271027 OUTER SLEEVE
28 XD3271028 COLLAR
29 XD3271029 OUTER SLEEVE
30 XD3271030 EMIT WATER NUT
31 XPEC02M E-CLIP 4MM
6
11
10
7
8
9
12
13
14
15
16
17
18
19
20
21
1
2
3
4
5
22
23
24
25
26
27
28
29
30
31