Page 1
TV
ENG
Light-Emitting Diode TeleVision
LED TV SET
ATTENTION:
Some of the functions mentioned in this user
User manual
manual may not be supported in this device.
Page 2
Contents
ACCESSORIES .................................................................................................. 2
IMPORTANT SAFETY INSTRUCTIONS ............................................................3
INTRODUCTION................................................................................................. 6
CONTROLS.....................................................................................................................................6
CONNECTION OPTION.................................................................................................................. 7
REMOTE CONTROL KEY FUNCTIONS ........................................................................................ 8
INSTALLING BATTERIES ............................................................................................................10
INSTALLATION................................................................................................. 11
STAND INSTALLATION................................................................................................................ 11
CONNECTIONS & SETUP ............................................................................... 12
ANTENNA CONNECTION............................................................................................................12
DVD CONNECTION......................................................................................................................14
PC CONNECTION.........................................................................................................................16
EARPHONE CONNECTION ......................................................................................................... 16
SCART CONNECTION ................................................................................................................. 17
USB CONNECTION
BASIC OPERATION .........................................................................................18
TURNING THE TV ON .................................................................................................................. 18
VOLUME ADJUSTMENT ............................................................................................................. 18
PROGRAM SELECTION ..............................................................................................................18
SLEEP TIMER............................................................................................................................... 19
RETURN FUNCTION .................................................................................................................... 19
SOURCE INPUT SWITCH ............................................................................................................19
OSD OPERATION............................................................................................. 20
FIRST TIME INSTALLATION
PICTURE MENU OPTIONS
SOUND MENU OPTIONS
CHANNEL MENU OPTIONS
LOCK MENU OPTIONS
SETUP MENU OPTIONS
TIME MENU OPTIONS
EPG MENU OPTIONS
PC OPERATION
USB OPERATION
TROUBLE SHOOTING..................................................................................... 48
REMOVE THE TV STAND ................................................................................ 49
REMOVE TV STAND PROCEDURE ................................................................50
TECHNICAL SPECIFICATIONS CHART
........................................
.......................................................................................................
.............................................................................................................
......................................
................................
......................................
...................................
......................................
......................................
...................................................................................................................
................................................
..........................................................................17
...........................................................................24
..........................................................................
...........................................................................
...........................................................................
...........................................................................
.........................................................................
...........................................................................
.........................................................................
.20
22
26
32
34
37
40
41
43
51
1
Page 3
Light-Emitting Diode TeleVision
TV
LED TV SET
ATTENTION:
Some of the functions mentioned in this user
User manual
manual may not be supported in this device.
ENG
D
V
D
S
E
T
U
P
AUTO
DVD-MENU
ASPECT
the
of power cord
Batteries
2 3
Page 4
4 5
Page 5
INTRODUCTION
INTRODUCTION
CONTROLS
This manual explains the features available on the model of 22" and 24” LED.
TV set.
9
This illustration might somehow differ from you
Control Panel
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
LED
front
r TV.
8
CONNECTION OPTION
Side Connection Panel
This illustration might somehow differ from your TV.
13
ON/OFF
3
21
(01)
AC 100-240V: Connect the power.
(02)
Earphone: Connect to headphone.
(03)
PC AUDIO input: Connect PC audio signal output.
(04)
VG
A input: Connect PC VGA signal output.
MI NI
(05)
(06)
(07)
(08)
(09)
(10)
(11)
(12)
(13)
Video input:
YPbPr
SCART Connector (Input: CVBS, RGB and Audio, Output: TV audio and video).
AV input:
COAX: TV Digital audio out.
RF: Antenna input (75 ohm).
HDMI input: Connect HDMI signal.
USB input: Connect USB Device input.
CI: CI slot (pay as you view card slot)
POWER ON/OFF: (Main Power Switch) Power turn on/off.
Note: Please study the operation manuals of external equipment
before connecting them to the television.
Please turn off the TV before connecting other equipment.
4 5 6
Connect to the YPbPr output on external devices.
Connect to the Audio and Video output of external devices.
7
8 9 10 11 12
6 7
Page 6
INTRODUCTION
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
(1) STANDBY button: Switches the set on from power on or off.
(2)
MUTE button: Press to eliminate or restore the sound.
(3)
Numerical buttons: Press number buttons for direct access
TV channels.
(4)
DISPLAY button: Press to display current status:channel,
input source, channel name, time etc.
(5)
RECALL button: Press to return to previous channel.
(6)
EPG button: Enter Electronic Program Guide.
(7)
“
” button: When OSD menu is on, press this button
S
to move the selection focus up or change settings.
(8)
MENU button: Display TV menu.
” button: When OSD menu is on, press this button to move
(9)
“
W
(10)
DVD SETUP button: Display the DVD SETUP menu.
(11)
EXIT/CANCEL
SOURCE button: Press to displya all possible input sources.
(12)
(13)
“
(14)
“ OK” button: Confirm, Select Function button, open Channel List.
(15)
“”
(17)
S. MODE button: Press to select Sound mode.
(18)
P. MODE button: Press to select Picture mode.
(19)
CH+
CH- / PAGE - button: Changes the channels down.
(20)
VOL + button: Adjust the volume up.
(21)
(22)
VOL - button: Adjust the volume down.
the selection focus left or confirm the settings.
button: Exit the OSD menu (On-screen-Display).
W
” button: When OSD menu is on, press this button to move
the selection focus right or confirm the settings.
Switch to custom set Favorite list.
W
/ PAGE+ button: Changes the channels up.
Move up page in Teletext mode.
Move down page in Teletext mode.
10
11
19
20
REMOTE CONTROL KEY FUNCTIONS
TEXT/ button: Switch the teletext on or off.
(23)
1
AUTO/ button: Press to auto adjust picture under PC mode.
(24)
INDEX/ button: Teletext function button (used for teletext mode only).
(25)
(26)
SUBTITLE/ button: Press the button to select different captions.
SIZE/ button:
6
7
8
9
D
V
D
S
E
T
U
P
12
13
14
15
16
17
21
(27)
HOLD/ button:
(28)
REVEAL/ button:
(29)
(30)
S.PAGE / button:
22
(31)
AUTO
18
DVD-MENU
ASPECT
REPEAT/GREEN button: Repeat function under DVD mode.
(32)
GOTO/RED button: DVD start playing from the desired time.
Teletext function button.
(33)
A-B/YELLOW button: A-B repeat under DVD mode.
(34)
ZOOM/BLUE button: Adjust picture size under DVD mode.
DVD-MENU button: Display the DVD disc MENU.
(35)
(36)
RECORD button: Press to start or stop the recording.
(37)
D.TITLE button: During a DVD disc playback,press to go to the
(38)
ANGLE button: Select different angle of DVD.
(39)
SLEEP button: Sets the sleep timer.
(40)
AUDIO button: Press to select Audio language in ATV/DTV mode.
(41)
ASPECT button: Press to select picture mode 4:3,16:9 etc.
(42)
TV/RADIO button: DTV & Radio function selection in DTV mode.
Press to stop playback under DVD/USB mode.
Press in DVD source Load/ Eject DVD disc.
Press to skip to the previous chapter/track
under DVD/USB mode.
Press to skip to the next chapter/track
under DVD/USB mode.
Change display size.
Press to play/pause the DVD/USB files.
Teletext function button (used for teletext mode only).
Slowmotion in DVD playing.
Press this button to recall the hidden information
for some Teletext mode.
Press to seach backward under DVD/USB mode.
Press this button to carry out the function of
SUBCODE in the teletext mode.
Press to seach forward under DVD/USB mode.
Teletext function button.
Press time and enter time. The unit starts
playing from you selected.
Teletext function button.
Teletext function button.
title menu if the disc contains title.
Change the DVD audio mode.
23
24
27
28
31
32
35
36
39
40
AUTO
D
V
D
S
E
T
U
P
25
26
29
30
33
34
DVD-MENU
ASPECT
37
38
41
42
8 9
Page 7
button cell of CR 2025
10
10
43 44
Page 8
INSTALLATION
STAND INSTALLATION
(1) Keep the TV stand when installing.
(2) Don’t set the TV set on shelves, carpets, beds, or closets.
(3) Don’t cover the TV with curtain or paper.
(4) Avoid the following methods:
CONNECTIONS & SETUP
connecting all equipment.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
CONNECTIONS & SETUP
ANTENNA CONNECTION
shown below.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
NOTE:
DVB-T radio in particular is very limited and not available in most locations.
Depending on your region and building structure, a stronger antenna may be
requires In order to receive DVB-T stations. Metal buildings and the geo-
graphic location of the transponder may have a strong effect on the reception.
Appropriate antennas may be obtained from your local speciality stores.
12 13
Page 9
CONNECTIONS & SETUP
CONNECTIONS & SETUP
DVD CONNECTION
When connecting with a component cable
1.
2.
3. Turn on the DVD player, insert a DVD disc.
4.
5. Refer to the DVD player’s manual for operating instructions.
Component
SOURCE button on the remote control.
RL
DVD CONNECTION
When connecting with a AV cable
1.
2.
3. Turn on the DVD player, insert a DVD disc·
4.
5. Refer to the DVD player’s manual for operating instructions.
When connecting with a HDMI cable
1. Connect the HDMI output of the DVD to the
SOURCE
AV R L
14
2.
button on the remote control.
3. Refer to the DVD player’s manual for operat-
ing instructions.
HDMI provides both audio and video signals and typically provides superior image quality to
component or AV.
SOURCE
15
Page 10
CONNECTIONS & SETUP
CONNECTIONS & SETUP
PC CONNECTION
When connecting with a D-sub 15 pin cable
1. Connect the VGA output of the PC to the VG A Input jack on the set.
2. Connect the audio outputs of the PC to the PC Audio Input jack on the set.
3. Turn on the PC and the set.
4. Select VGA source with using the SOURCE button on the remote control.
5. Refer to the PC manual for operating instructions.
PC INPUT Supported format:
Support Resolution:800*600@60HZ, 1024*768@60HZ,
1152*864@60HZ, 1280*720@60HZ, 1280*768@60HZ,
1280*960@60HZ, 1280*1024@60HZ, 1920*1080@60HZ.
Note:
1. Recommended resolution is 1920* 1080@60HZ.
2. Others resolution may not be supported.
SCART CONNECTION
When connecting with a SCART cable
1. Connect the SCART output of the DVD to the SCART input jack on the set.
2. Turn on the DVD player, insert a DVD.
3. Select SCART source with using the SOURCE button on the remote control.
4. Refer to the DVD player’s manual for operating instructions.
USB CONNECTION
When connecting with a USB
EARPHONE CONNECTION
When connecting with a EARPHONE cable
1. Connect the EARPHONE output of the TV to the
EARPHONE input jack.
2. Turn on the TV, the earphone is activated but the TV
Speakers are no sound output.
16 17
1. Connect the USB Device to the USB slot on
the TV.
2. Select USB source with using the SOURCE
button on the Remote control.
3. Select Media Mode: Photo, Music, Movie, Text
to play.
Note: This unit has been designed where possible to be
compatible with most makes of USB device.
Due to the many varied types available, we cannot
guarantee that all makes and models are to be used.
Page 11
10,20,30,40,50,60,90 and 120
Sleep:
YPbPr
18 19
Page 12
OSD OPERATION OSD OPERATION
Tuner Type
20 21
Page 13
OSD OPERATION OSD OPERATION
Full
22 23
Page 14
OSD OPERATION OSD OPERATION
Sound
Sound
Sound
Sound Mode
SRS Setting
SRS Setting Off
Off
PCM
PCM
Sound
SRS Setting
SRS Setting,
24 25
Page 15
OSD OPERATION OSD OPERATION
Tuner Type
Tuner Type
Tuner
Tuner
Antenna
Antenna
Antenna
Tuner
26 27
Page 16
OSD OPERATION OSD OPERATION
28 29
Page 17
OSD OPERATION OSD OPERATION
30 31
Page 18
OSD OPERATION OSD OPERATION
Lock system
Lock system
Lock system
Lock system
Clear Lock
Lock system
Lock system
Clear Lock
32 33
Clear Lock
clear lock.
Page 19
OSD OPERATION OSD OPERATION
Demo Mode Off
34 35
Page 20
OSD OPERATION OSD OPERATION
36 37
Page 21
OSD OPERATION OSD OPERATION
Demo Mode
Demo Mode,
38 39
Page 22
OSD OPERATION OSD OPERATION
40 41
Page 23
OSD OPERATION USB OPERATION
USB
42 43
Page 24
USB OPERATIONUSB OPERATION
44 45
Page 25
USB OPERATIONUSB OPERATION
46 47
Page 26
TROUBLE SHOOTING
Before contacting the service technician, perform the following simple checks. If any problem still
exists, unplug the TV and call the service hotline
NOITULOSELBISSOPMELBORP
No sound and picture
Normal picture but no sound
The remote control does not
work
Power is suddenly turned off
Picture appears slowly after
switching on
No or poor color or poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on some
channels
Lines or streaks in pictures
No output from one of the
speakers
- Check that the main plug has been connected to a wall outlet.
- Check that you have pressed the button on the remote control.
- Check the picture contrast and brightness settings.
- Check the volume.
- Sound muted? Press the MUTE button.
- Try another channel the problem may be with the broadcast.
- Are the audio cables installed properly.
- Check to see if there are any objects between the product and remote control
Causing obstruction.
- Are batteries installed with correct polarity (+ to +,- to -).
- Whether the remote control is out of its working distance or angle.
- Install new batteries
- Is the sleep timer set.
- Check the power control settings. Power interrupted.
- No broadcasting on station. Check whether Off is selected in TIME menu under option Auto
Standby.
- This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
- Adjust the color in menu option.
- Try another channel, the problem may be with the broadcast.
- Are the VIDEO cables installed properly?
- Check for local interference such as an electrical appliance or power
tool.
- Station or cable product experiencing problems. Tune to another
station.
- Station signal is weak, reorient antenna to receive weaker station.
- Check for sources of possible interference.
- Check the antenna (Change the direction of the antenna).
- Adjust balance in menu option.
REMOVE THE TV STAND
How to remove the TV stand
If you prefer to mount your new TV on a wall instead of attaching it to the TV stand, please remove the
TV stand from the TV unit before mounting the TV on the wall.
Read all instructions before continuing with the TV stand removal.
a. Open the box, and make sure all necessary parts are in the box. The TV is assembled with the TV
stand.
b.Cover an even stable surface with a soft cloth. Place the LED TV unit face-down on the cloth. Fit the
base onto the bottom of the LED TV unit as shown at
NOTE: There is a problem in VGA mode. (Only VGA mode applied)
The signal is out of range
Vertical bar or stripe on
back ground & Horizontal Noise
& lncorrect position.
Screen color is unstable or
single color.
- Adjust resolution, horizontal frequency, or vertical frequency on input source.
- Check it whether the signal cable is connected or loose.
- Check the input source.
34
position.
- Check the signal cable.
- Reinstall the PC video card.
48 49
NOITULOSELBISSOPMELBORP
Page 27
REMOVE TV STAND PROCEDURE
4
If you want to remove the TV stand from the TV sets, unscrew 4 screws under the stand
RE-INSTALL TV STAND PROCEDURE
TECHNICAL SPECIFICATIONS CHART
If you want to put the TV stand back to the TV set, screw back all the screws in clockwise direction as
shown at
50 51
Power supply AC: AC 100-240V~ 50/60 Hz
Program memory Analog :100CH
Digital : 400CH
RF Aerial input: 75 Ohm (Co-axial)
Loudspeaker impedance: 4 Ohm
Sound systems: NICAM/A2
Batteries: 2xCR2025
Broadcasting systems received: PAL (B/G, D/K, I)
SECAM (B/G, D/K, L)
DVB-T/C
Loading...