Shindaiwa F230 Owner's/operator's Manual

SHINDAIWA OWNER’S/
OPERATORS MANUAL

F230 GRASS TRIMMER

WARNING!

Minimize the risk of injury to yourself and others!
Read this manual and familiarize yourself with the
contents. Always wear eye and hearing protection
when operating this unit.

Part Number 62068-94011

Rev. 3/04

Shindaiwa Inc.
11975 S.W. Herman Road
Tualatin, Oregon 97062
Telephone: [phone]
Fax: [phone]
www.shindaiwa.com

Shindaiwa Kogyo Co., Ltd.
Head Office: 6-2-11 Ozuka
Nishi, Asaminami-Ku
Hiroshima, 731-3167, Japan
Telephone: [phone]
Fax: [phone]

䊚2004 Shindaiwa, Inc.
Part Number 62068-94011
Printed in Japan
Rev. 3/04
Specifications subject to change without notice.

2

Introduction

PAGE

The Shindaiwa F230 curved-shaft
grass trimmer has been designed and
built to deliver superior performance
and reliability without compromise to
quality, comfort, safety or durability.

Shindaiwa’s high-performance
engines represent the leading edge of
2-cycle engine technology, delivering
exceptionally high power at remark­ably low displacement and weight. As
an owner/operator, you’ll soon
discover for yourself why Shindaiwa is
simply in a class by itself!

IMPORTANT!

The information contained in these
instructions describes units available
at the time of publication.
While every attempt has been made
to give you the very latest information
about your Shindaiwa unit, there may
be some differences between your
F230 and what is described here.
Shindaiwa Inc. reserves the right to
make changes to products without
prior notice, and without obligation to
make alterations to units previously
manufactured.

Attention Statements........................... 3

Safety .................................................... 4

Product Description ............................ 9

Specifications ..................................... 10

Assembling the F230 ........................ 11

Mixing Fuel ........................................ 17

Starting the Engine ........................... 18

Stopping the Engine.......................... 20

Adjusting Engine Idle ....................... 20

Cutting Grass ..................................... 22

Maintenance ...................................... 23

Troubleshooting Guide .................... 28

Emission System Warranty .............. 32

Contents

3

Throughout this manual are special
“attention statements”.

CAUTION!

A statement preceded by the word
“CAUTION” contains information
that should be acted upon to
prevent mechanical damage.

IMPORTANT!

A statement preceded by the word
“IMPORTANT” is one that possesses
special significance.

NOTE:

A statement preceded by the word
“NOTE” contains information that is
handy to know and may make your
job easier.

Attention Statements

IMPORTANT!

The operational procedures described
in this manual are intended to help
you get the most from your unit as
well as to protect you and others from
harm. These procedures are guide­lines for safe operation under most
conditions, and are not intended to
replace any safety rules and/or laws
that may be in force in your area.
If you have questions regarding your
F230 grass trimmer, or if you do not
understand something in this manual,
your Shindaiwa dealer will be glad to
assist you.
You may also contact Shindaiwa, Inc.
at the address printed on the back of
this Manual.

WARNING!

A statement preceded by the
triangular attention symbol and the
word “WARNING” contains
information that should be acted
upon to prevent serious bodily
injury.

Read and follow this
operators manual.
Failure to do so could
result in serious injury.

Wear eye and hearing
protection at all times
during the operation
of this unit.

Keep bystanders
at least 50 feet (15 m)
away during operation.

Beware of thrown or
ricocheted objects.

NOTES:

4

Work Safely

Shindaiwa grass trimmers operate at
very high speeds and can do serious
damage or injury if they are misused or
abused. Never allow a person without

training or instruction to operate your
grass trimmer!

WARNING!

Use Good Judgment

ALWAYS wear eye protection to

shield against thrown objects.
NEVER run the engine when

transporting the unit.
NEVER run the engine indoors!

Make sure there is always good
ventilation. Fumes from engine
exhaust can cause serious injury
or death.

ALWAYS clear your work area of
trash or hidden debris that could
be thrown back at you or toward
a bystander.

ALWAYS use the proper cutting
tool for the job.

ALWAYS stop the unit immedi­ately if it suddenly begins to
vibrate or shake. Inspect for
broken, missing or improperly
installed parts or attachments.

NEVER extend trimming line
beyond the length specified for
your unit.

ALWAYS keep the unit as clean
as practical. Keep it free of loose
vegetation, mud, etc.

ALWAYS hold the unit firmly with
both hands when cutting or
trimming, and maintain control at
all times.

ALWAYS keep the handles
clean.

ALWAYS disconnect the spark
plug wire before performing any
maintenance work.

Stay Alert

You must be physically and mentally
fit to operate this unit safely.

General Safety Instructions

WARNING!

Never make unauthorized
attachment installations.

WARNING!

Never operate power equipment of
any kind if you are tired or if you
are under the influence of alcohol,
drugs, medication or any other
substance that could affect your
ability or judgement.

WARNING!

Minimize the Risk of Fire

NEVER smoke or light fires near

the trimmer.
ALWAYS stop the engine and

allow it to cool before refueling.
Avoid overfilling and wipe off any
fuel that may have spilled.

ALWAYS move the unit to a place
well away from a fuel storage
area or other readily flammable
materials before starting the
engine.

NEVER place flammable material
close to the engine muffler.

NEVER run the engine without
the spark arrester screen in place.

33

MAINTENANCE AND REPAIR REQUIREMENTS

You are responsible for the proper use and maintenance of the engine. You should keep all
receipts and maintenance records covering the performance of regular maintenance in the event
questions arise. These receipts and maintenance records should be transferred to each subse­quent owner of the engine. Shindaiwa Kogyo Co., Ltd. reserves the right to deny warranty
coverage if the owner has not properly maintained the engine. Shindaiwa Kogyo Co., Ltd. will not
deny warranty repairs, however, solely because of the lack of repair, maintenance or failure to
keep maintenance records.

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND
SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL;
HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A DEALER OR SERVICE
CENTER AUTHORIZED BY SHINDAIWA KOGYO CO., LTD. THE USE OF PARTS THAT ARE
NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY
IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE A
BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

If other than the parts authorized by Shindaiwa Kogyo Co., Ltd. are used for maintenance
replacements or for the repair of components affecting emission control, you should assure
yourself that such parts are warranted by their manufacturer to be equivalent to the parts
authorized by Shindaiwa Kogyo Co., Ltd. in their performance and durability.

OBTAINING WARRANTY SERVICE

All repairs qualifying under this limited warranty must be performed by a dealer authorized by
Shindaiwa Kogyo Co., Ltd.
If any emission-related part is found defective during the warranty period, it is your responsibil­ity to present the product to an authorized Shindaiwa dealer. Bring your sales receipts showing
the date of purchase for this engine. The dealer authorized by Shindaiwa Kogyo Co., Ltd. will
perform the necessary repairs or adjustments within a reasonable amount of time and furnish you
with a copy of the repair order. All parts and accessories replaced under this warranty become the
property of Shindaiwa Kogyo Co., Ltd.
To locate an authorized Shindaiwa dealer near you, contact your Shindaiwa Distributor. For the
name and telephone number of the Shindaiwa Distributor in your area, please call Shindaiwa Inc.
at [phone] between the hours of 8:00 AM and 5:00 PM Pacific Standard Time.

THIS WARRANTY IS ADMINISTERED BY

Shindaiwa Inc.
11975 S.W. Herman Rd.
Tualatin OR. 97062
[phone]

5

The Properly Equipped Operator (general)

Always operate with

both hands firmly

gripping the unit.

Wear close-fitting clothing to
protect legs and arms. Gloves
offer added protection and are
strongly recommended. Do not
wear clothing or jewelry that
could get caught in machinery
or underbrush. Secure long
hair so that it is above
shoulder level.
NEVER wear
shorts!

Wear hearing protection devices and a

broad-brimmed hat or helmet.

Always wear eye protec-

tion such as goggles or

safety glasses.

Keep away from the rotating
trimmer line at all times, and

never lift a moving attachment

above waist-high.

Wear appropriate footwear (non-skid
boots or shoes): do not wear open­toed shoes or sandals. Never work

barefooted!

Keep a proper
footing and do
not overreach—
maintain your
balance at all times
during operation.

Always make sure the

appropriate cutting attach-

ment shield is correctly

installed and in good

condition.

Figure 1

32

Shindaiwa Kogyo Co., Ltd.

Federal Emission Design And Defect Limited Warranty

Utility And Lawn And Garden Engines

Shindaiwa Kogyo Co., Ltd. warrants to the initial purchaser and each subsequent owner, that
this utility equipment engine (herein engine) is designed, built and equipped to conform at the
time of initial sale, to all applicable regulations of the U.S. Environmental Protection Agency
(EPA), and that the engine is free of defects in materials and workmanship that would cause this
engine to fail to conform with EPA regulations during its warranty period. This emission warranty
is applicable in all States, except the State of California.
For parts listed under PARTS COVERED, the dealer authorized by Shindaiwa Kogyo Co., Ltd.
will, at no cost to you, make the necessary diagnosis, repair, or replacement of any defective
emission-related component to ensure that the engine complies with applicable U.S. EPA
regulations.

MANUFACTURERS WARRANTY COVERAGE

When sold within the U.S., this engine’s emission control system is warranted for a period of two
(2) years from the date this product is first delivered to the original retail purchaser.

OWNER’S WARRANTY RESPONSIBILITIES

As the engine owner, you are responsible for the performance of the required maintenance listed
in your owner’s manual. Shindaiwa Kogyo Co., Ltd. recommends that you retain all receipts
covering maintenance on your engine, but Shindaiwa Kogyo Co., Ltd. cannot deny a warranty
claim solely for the lack of receipts or for your failure to ensure the performance of all scheduled
maintenance.
As the engine owner, you should however be aware that Shindaiwa Kogyo Co., Ltd. may deny
your warranty coverage if your engine or a part has failed due to abuse, neglect, improper
maintenance or unapproved modifications.
You are responsible for presenting your engine to the nearest dealer authorized by Shindaiwa
Kogyo Co., Ltd. when a problem exists.
If your Shindaiwa Dealer is unable to answer questions regarding your warranty rights and
responsibilities, you should then contact your Shindaiwa Distributor.
For the name and telephone number of the Shindaiwa Distributor in your area, please call
Shindaiwa Inc. at [phone] between the hours of 8:00 AM and 5:00 PM Pacific Standard
Time.

PARTS COVERED

Listed below are the parts covered by the Federal Emission Design and Defect Warranty. Some
parts listed below may require scheduled maintenance and are warranted up to the first scheduled
replacement of that part. The warranted parts include:

1. Carburetor Internal Components

• Valve Assembly-throttle, Jet, Metering Diaphram

2. Ignition System Components

• Ignition Coil

• Flywheel Rotor
The emission control system for your particular Shindaiwa engine may also include certain
related hoses and connectors.

LIMITATIONS

The Federal Emission Design and Defect Warranty shall not cover any of the following:

(a) conditions resulting from tampering, misuse, improper adjustment (unless they were
made by the dealer or service center authorized by Shindaiwa Kogyo Co., Ltd. during a warranty
repair), alteration, accident, failure to use the recommended fuel and oil, or not performing

required maintenance services,

(b) the replacement parts used for required maintenance services,

(c) consequential parts used for required maintenance services,

(d) diagnosis and inspection fees that do not result in eligible warranty service being
performed, and

(e) any non-authorized replacement part, or malfunction of authorized parts due to use of
non-authorized parts.

The following statement only applies to United States and its territories

6

Safety Labels

Figure 2

IMPORTANT!

Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.

31

Troubleshooting Guide

ADDITIONAL PROBLEMS

Excessive
vibration.

Warped or damaged
tool.

Loose gearcase.

Bent main shaft/worn or
damaged bushings.

Inspect and repair
tool as required.

Tighten gearcase securely.

Inspect and replace
as necessary.

Cutting attachment
will not move.

Shaft not installed
in powerhead, coupler
or gearcase.

Broken shaft.

Damaged gearcase.

Inspect and reinstall
as required.

Consult with an authorized
servicing dealer.

Consult with an authorized
servicing dealer.