Ceiling Type
X-ray Tube
Support
PD514-001
CH-200M
GENERAL
The Ceiling Type X-ray Tube Support CH-200M is a
device that holds an X-ray tube unit and collimator
combined with an X-ray voltage generator, radiographic
stand, and table, it is designed to perform the
radiography of patients either in a standing or supine
position.
FEATURES
(1) Easier Positioning with the New-Style Handle
The handle’s easy-to-grip ergonomic design
allows for the fast, accurate single handed
maneuvering that is necessary for complex angles
in orthopedic procedures and emergency use.
(2) Impressive Flexibility for Erect Procedures with
Increased Vertical Movement
There is an “All Lock-Release Switch” on the
upper part of the handle, allowing one-handed
operation for procedures in the standing position.
(3) Free Rotation about the Support Axis
Rotation around the vertical axis is enabled, by
activating the rotation-switch, which is located on
the control panel. The lock can be set in any
position, allowing precise, accurate positioning.
(4) User-definable Brake-release Buttons
The 8 brake-release buttons positioned on the
control panel can be customized to suit each
user’s individual preferences.
CH-200M
(5) V/H (Vertical/Horizontal) angle display conversion
When taking images in the Vertical position the
angle display can be converted to vertical angle
mode and specific degree angulations that are
required can be made.
(6) Long Vertical Travel
The long vertical travel range, which is 1600mm,
provides sufficient SID (Source Image Distance)
for images in the supine position as well as for low
position images in the standing position.
(7) Aluminum Rails Ensure Smooth Operation
The aluminum rail has a dual structure that
incorporates a hardened steel inner-rail wear strip,
reducing unevenness on the bearing surface and
providing a smooth operation.
(8) Stops Precisely at the Required Position Using a
Pin-stop Mechanism
The ceiling support is equipped with a pin-stop
mechanism, which accurately locates the column
assembly in the ‘Center-Find Position’. Due to its
precise pin-stop mechanism this allows rapid
preparation for taking X-ray images. There is also
a mechanism for suppressing shock when the
support is stopped quickly and suddenly, ensuring
greater durability.
CONFIGURATION
(9) Handy Brake-release Buttons on the Rear of the
Support Assembly
Buttons allowing rotation around the vertical axis
and motion in 3-direction, as well as a
collimator-illumination button, are provided on the
rear of the support. This feature the versatility to
perform positioning in emergencies or any other
situation.
(10) Three models depending on installation
requirements
Three models, standard type, rear-mounting type,
low-ceiling type are prepared. Rear-mounting type
is available to set up the radiographic table near
the wall. Low-ceiling type keeps same vertical
stroke with standard type although ceiling height
is 2700mm.
Fixed rail
Moving rail
X-ray Tube unit pull-up section
X-ray Tube unit support section
Operation panel
Rear operation panel
2
CH-200M
SPECIFICATIONS
Item Standard type Rear-mounting type (*2) Low-ceiling type
Maximum supportable
weight
Balancing system Spring-balanced type
Ceiling fixtures Rail Fixed rail: 4 m; Traveling rail: 2 m (Other lengths are also available.)
Movement of X-ray tube assembly
Range of movement
Vertical travel (*1)
Longitudinal travel 2,950 mm (with a 4-m fixed rail)
Transverse travel 1,400 mm (with a 2-m traveling rail)
Operation Manual, electromagnetic lock (released when activated)
Rotation about the vertical axis
Angle of rotation ±180°, continuous (click stops at 90° intervals)
With ceiling height of
2850 mm:
400 to 2,000 mm
With ceiling height of
2850 mm:
400 to 2,000 mm
39 kg
With ceiling height of 2700 mm:
400 to 2,000 mm
Continuous
+30° to -90°, continuous
(click stops at 90° intervals)
Operation Manual, electromagnetic lock (released when activated)
Rotation about the horizontal axis
Angle of rotation +120° to -180°, continuous
Click stops at 0° and ±90°
Operation Manual, electromagnetic lock (released when activated)
Display Angle of rotation displayed digitally.
Standard ceiling height 2,850 mm (*3) 2,700 mm
*1 Distance between focus and floor with standard rails (The values are 10 mm less if a wide fixed rail is used.)
*2 Low-ceiling type are not available with the rear-mounting design.
*3 Installation with the focus 350 mm lower is possible, thus vertical travel movement 400 to 2,000 mm is maintained
although the ceiling height is 3200 mm.
3
CH-200M
OPERATION PANEL
[Vertical release] button
[3-directional release] button
[Longitudinal release] button
[Transversal release] button
[3-directional release] button
[Horizontal axis rotation release] button
[Vertical axis rotation release] button
Their functions are explained as per the standard arrangement.
Arrangement of buttons
A function of the button
Should the arrangement be changed, read the explanation with respect to that new arrangement.
To change the arrangement, please contact the SHIMADZU Service Representative.
to can be changed by installing.
can be selected.
[Vertical release] button
Vertical/Horizontal angle convert button
[Collimator lamp] button
[Center find] button
Grip
X-ray tube selection indicator
Transversal center position i ndicator
REAR OPERATION PANEL
Longitudinal center position indicator
Breaking of wire indicator
Center find mode indicator
Rotation angle indicator
Angle unit indicator
[Vertical axis rotation release] button
[Collimator lamp] button
[3-directional release] button
4
CH-200M
DIMENSIONS
Weight 250 kg (including support, 4-m fixed rail, and 2-m traveling rail)
Power source Single phase, 100 VAC, 0.7 kVA, 50/60 Hz (supplied from X-ray high-voltage generator)
Standard type
With ceiling height of 2,850 mm
Rear-mounting type
850 400
1600
850 400
STROKE
4000
120° 180°
2950
STROKE
120° 180°
865 385
1600
865 385
2000
1350
±180°
1400
STROKE
STROKE
With ceiling height of 2,850 mm
Low-ceiling type
2700
With ceiling height of 2,700 mm
1600
700
1600
400
STROKE
STROKE
2950
STROKE
715
180°
120°
2950
−90° to +30°
STROKE
385 1600
STROKE
1600
STROKE
±180°
1400
STROKE
1400
STROKE
565
5
CH-200M
Remarks
* Every value in this Product Data Sheet is a standard value, and it may vary a little from the actual at each
site.
* The appearances and specifications are subject to c hange for reasons of improvement without notice.
* Certain configurations may not be available pending regulatory clearance. Contact your Shimadzu
representative for information on specific configurations.
SHIMADZU CORPORATION. International Marketing Division
3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax: 81(3)3219-5710
URL http://www.shimadzu.com
6
Shimadzu Corporation Medical Systems Group has
been certified by TUV Rheinland as a manufacturer
of medical equipment and systems i n compliance
with ISO9001: 2000 Quality Management Systems
and EN ISO13485: 2000 Medical Equipment
Quality Management Systems.
Loading...